How do you edge a French drain?

You can install corrugated drainage pipes, also called “tiles,” to create edging that will aid with drainage. Dig out an 18-inch-deep trench around the area; it should slope downwards and be 2 inches wider than the tile. Add 2 inches of gravel to the trench, and rake it out smoothly.

How do you lay patio slabs with drainage?





How to build a French drain for a patio:

  1. Dig a channel 500mm deep. …
  2. Add a 50mm layer of bedding aggregate to the bottom of the channel.
  3. Cover the aggregate layer with landscaping fabric. …
  4. With your channel prepped, you can add your drainage pipe, ensuring the fall remains the same and the perforated side is facing down.

How do you install drainage in an existing patio?

PATIO DRAINAGE SYSTEMS FOR NEW AND OLD CONCRETE



Where the water tends to collect, cut out a sloping channel in the concrete to direct the water away, filling it with decorative stone or gravel. Instead of gravel, you can also have a trench or channel drain made of metal installed.

Do you need drainage for patio?

Whether you’re making changes to your roof, building a new driveway, or having a patio installed, drainage should always be in the forefront of your mind. Poor drainage can lead to interior damp and mould, it can cause sitting water on exterior surfaces, and it can cause damage to exterior structures.

Does landscape edging prevent drainage?

Improperly installed edging can cause as many problems as it solves, however. The wrong technique could cause drainage problems, drowning the roots of bedding plants and trees and creating muddy, unattractive areas in the landscape.

How do you hide a French drain in your yard?





Quote from the video:
Quote from Youtube video: So what we do is we basically cover the stone with a filter fabric. So this has already been leveled off it's ready for the sod to go over. And we pin.

How do you install patio edges?

Quote from the video:
Quote from Youtube video: This type of edging. Which is basically just a little two-step edging and of course this runs into our paper patio. And then it goes around the back kind of in a half circle.

How do you slab around a drain?

Quote from the video:
Quote from Youtube video: Cover I've extended the line of where it's gonna go both ends so when we put the slab on top of it I know that's the line I have to cut I've also done the same here on the ACO drain pencil mark there.

How do I divert water from my patio?

The fastest and easiest way to divert water away from your lawn is to create a drainage system. A simple solution to divert water in your yard is installing a French drain.



  1. Install a Sump Pump. …
  2. French Drains. …
  3. Relocate the Rain Gutter/Downspout. …
  4. Dry Well. …
  5. Build a Dry Creek. …
  6. Swale Drain System. …
  7. Fix Soil Problems.

How much should a patio slope for drainage?



How Much Slope? The standard slope for proper concrete drainage is a one-quarter inch drop for every foot of length. So, to calculate the difference in height between one end of a patio or walkway and another, simply multiply the length by one-quarter.

What should the fall be on a patio?

1 in 80 fall

All of the paving slabs will need to be laid with a slight slope, around a 1 in 80 fall. This is so that pools of water don’t form on the surface of your patio. That means that for every 80cm your patio should fall by 1cm. The fall may vary dependent on the size of your patio but this is the optimum level.

Will rocks help with drainage?



Using rocks, water can be directed towards ditches, for example, that are landscaped as swales and resemble creeks or meadows. Because rocks do not compact or degrade with time, they make excellent components to a yard’s drainage system and do not require constant upkeep.

What is a swale in landscaping?

Drainage swales are shallow ditches that blend in with surrounding landscape design, facilitate water management, and encourage natural irrigation. Swales take advantage of natural slopes in the land to direct water downward into all the soil as opposed to letting it pool above ground or waterlog a specific region.

How do you redirect water on concrete?

The best way to divert runoff water away from your driveway is to install a French drain or swale. This drain will intercept the water that runs toward your driveway and channel it downhill. With a well-constructed drain, you can stop your driveway from being flooded with runoff.

How do you drain a low spot on concrete?

It’s aggravating in the summer months,but dangerous in the winter when the water turns into ice. Drill a 1/2″ hole through the slab at the lowest point of the puddles to let the water drain out. Drill a 1/2″ hole through the slab at the lowest point of the puddles to let the water drain out.

How do you make a drainage channel in concrete?



Quote from the video:
Quote from Youtube video: Door. So what we're gonna do is um my idea is to just cut a channel through here and then put a channel drain all the way across. And let the water come out the end.

Can you cover a French drain with grass?

Quote from the video:
Quote from Youtube video: Same with this downspout that pop up is just over top of the French drain fabric is around it sod is laid over top of it any shingle gravel leaves debris that come off the roof top just ends up in the

How far should water drain away from house?

A good rule of thumb: One downspout should not drain more than 35 feet of gutter. The gutters must be clean to prevent clogging. The downspouts need to be extended away from the home a minimum of four feet, with six feet being preferred.