How do I know what type of toilet tank I have?

Finding your toilet manufacturer and/or model number: Carefully remove the toilet tank lid and set it gently on the floor, with the bottom facing up. Look for the manufacturer name or a number on the bottom side of the water tank lid.

What are the different types of toilet tanks?





Toilet Types Explained

  • Dual-Flush Toilets. As the name suggests, they have two flush button options – a half flush and a full flush. …
  • Double Cyclone Flush. …
  • Pressure Assisted Toilets. …
  • Gravity-Flush Toilet. …
  • Composting Toilets. …
  • Waterless “Dry Sanitation” Toilet. …
  • Upflush Toilet. …
  • Portable Toilets.


What are the 3 types of toilet?

The Three Main Types Of Toilets

  • Wall Hung toilets.
  • Close Coupled toilets.
  • Back To Wall toilets.


Can I replace just the tank on my toilet?





Replacing a toilet tank is a task most homeowners can do without a call to the plumber. Because the tanks and bowls may be sold separately, you can often buy just the tank. However, it is important to match the toilet manufacturer and model to ensure proper installation and function of the toilet when you’re done.

Will any tank fit any toilet?

When asking the question is a toilet tank universal, the short answer is no. While in certain brands they can be interchangeable, the overall consensus is that your toilet tank is fitted to your toilet model. When looking to purchase a new tank, you need to learn the measurements and model number.

How do I measure for a replacement toilet tank?

A toilet tank’s height is measured from the floor to the top of the toilet tank. Place the end of the tape measure on the floor, and take the measurement at the very top edge of the tank lid. Toilet bowls and seats are either round or oval.

What are the different types of toilet cisterns?

Commercial Washrooms supplies 4 types of toilet pans and cistern arrangements, each with their own suitability for certain installations and environments.

  • Low-level toilet. …
  • Close-coupled toilet. …
  • Back to wall toilet. …
  • Wall hung toilet.



What are the old style toilets called?

Also called high-tank or Victorian-style toilets, pull-chain toilets are a blast from the past but they’re making a comeback in contemporary bathroom remodels and new bath constructions. Let’s take a closer look at how this vintage toilet works and why it’s seeing a revival.

How do I know what size flush valve I need?

Look at the flush valve drain opening at the bottom of your tank. If the opening looks about the size of a baseball or orange, you need a 2″ flapper. If the opening looks about the size of a softball or grapefruit, you need a 3″ flapper.

Are toilet tanks a standard size?



Standard toilet dimensions are typically between 28–30″ deep, roughly 20″ wide, between 27–32″ high, and have a rough-in between 10–14″.

How much does it cost to replace a toilet tank?

Tank. A replacement tank will range from $50 to $100, not including the labor to install it. A professional plumber can put in a new tank in one to two hours for a total cost of $45 to $300. Total project price will depend on minimum charges as well as whether the internal tank parts also require replacement.

Can you fix cracked toilet tank?

Any hairline cracks below the waterline will require a bit of patching with epoxy. Larger cracks below the water line means the toilet needs to be replaced entirely. While a patch can be done DIY, it is always best to consult with a professional plumber.

What causes toilet tank to crack?

Cracks From Repairs:



It is made of porcelain and can crack or break very easily, and simple repairs are often the cause of a cracked toilet. For example, fixing a broken component inside the tank and putting the lid back on the tank too hard can cause the toilet to crack around its top.

How long do toilets usually last?



around 50 years

Most plumbers agree that an average toilet can last around 50 years. However, this is only when the toilet is well maintained and gently used. If it was improperly installed or frequently misused, it may not last as long.

Will flex seal work on a cracked toilet tank?

Quote from the video:
Quote from Youtube video: And as you can see i sprayed. The flex flex seal on the crack. And on the area i evened it out. And took two coats because i actually saw it go inside the crack. So it's a good chance.

What can I use to seal a leaking toilet tank?

Quote from the video:
Quote from Youtube video: And then a rubber washer. And this is going to keep the tanks from leaking.

Can you use plumbers putty on toilet tank bolts?



It’s not a good idea to use plumber’s putty on a toilet tank bolt. You might be tempted because the material is supposed to be a good sealant. But it isn’t built for this purpose. It won’t give you the kind of seal you need, and it can even impede the rubber gasket from sealing properly.

What is the best sealant for water tank?

Epoxies, acrylics, polyurethanes and cementitious slurries (shown here) are all used as tank coatings.

  • Epoxies are among the most popular coatings due to their outstanding adhesion and abrasion resistance.
  • Polyurethanes are flexible, fast-drying, and tough.

Can I use flex seal on a water tank?

Q: Can I use it to seal the inside of a water tank used for drinking? A: No, we do not recommend that you use Flex Seal® on surfaces where it comes in direct contact with drinking water.

Does Flex Seal work on water tanks?

A: YES, Flex Paste can be applied on dry or wet surfaces and even underwater. It won’t dissolve or wash away and even dries underwater. For best results apply a generous amount to the surface using firm pressure. This will help push the water out and allow better contact to the surface during application.