How do I know what kind of wood my fireplace is?

Each fireplace and insert has a rating plate which contains your model number and serial number. Gas and wood burning fireplaces have a rating plate in the control compartment area, under the smoke shield or on the firebox side column.

What do you put around a wood burning fireplace?

Stone or brick is a common material to use behind a wood burning stove. These panels help create more of a focal point for a room. What is this? The NASD explains that any area within 36 inches of the stove in all directions should be covered.

What are the different types of wood fireplaces?

Types of Wood Burning Fireplaces

  • Wood Fireplace Inserts. Wood fireplace inserts are sealed fireboxes that are inserted or placed inside an existing masonry fireplace. …
  • Wood Stoves. …
  • Wood Burning Fireplaces. …
  • EPA Certified Wood Fireplaces. …
  • You May Also Like…

Does all wood have creosote?

All Wood Creates Creosote

In fact, all wood does. But opponents of burning pine believe that it creates more creosote merely because it contains a lot of pitch. On the contrary, hardwoods can actually cause more creosote than softwoods like pine, as Lifestyle Energy explains.

How do you tell if your fireplace is vented or ventless?

A vented fireplace has attractive yellow and orange flames that lick upward around the sides of the ceramic logs. An unvented fireplace, by contrast, has much less striking flames. These flames tend to be smaller and bluer.

How do you know if your fireplace is vented or ventless?

Turn on the fireplace. If the flames reach above the gas logs and the look like a wood burning fireplace, then the logs must be vented. If the flames are small, an have a blue cast, the fireplace is vent-free.

Can I have a wooden surround with a wood burner?

Because of the distance to combustible regulations you may have difficulty fitting any kind of wooden surround unless you use twin wall flue to protect combustibles (see distance to combustibles). A surround has to be shielded from the flue pipe that leaves your stove or be 15″ or more from it.

What is vermiculite board?

Vermiculite board is an insulating board from a naturally occurring aluminium-magnesium silicate mineral. Non-toxic and environmentally friendly. Vermiculite board can be easily used with wood working tools.

Can you use a wooden fire surround with a log burner?

So if you’ve already got a surround, then using a small wood burning stove for fireplace that you already have will be the most beneficial for your home style and budget.

Will a hot fire remove creosote?

One method to loosen crusty or tarry creosote so it flakes off and falls down into the firebox or fireplace is to burn aluminum cans in a very hot fire. While this method works, it does not clean the chimney of creosote completely, and chimney brush cleaning is still necessary.

Can I burn pine cones in my fireplace?

Yes, pine cones can be burned in wood stoves or fireplaces. But be sure they are dry to avoid popping and extra creosote buildup. Dry pine cones make great kindling and fire starters.

What is the best wood to burn in a fireplace?

Oak is considered the best wood to burn in a fireplace, by far. Why? This type of wood produces a slow-burning fire that lasts longer and burns more evenly and hotter. In addition, oak is plentiful and found in almost any area of the country.

What type of wood burns the longest?

Hickory is the Longest Burning Wood

It’s simple, really: it takes longer for the fire to consume hardwood because there is more fuel “packed” into each log. Hickory has the highest density among firewood (37-58 lbs/ft.3), and therefore burns for the longest time.

Are Duraflame logs bad for chimney?

Since duraflame® firelogs are made with dry wood sawdust, only a fine soot is left in the chimney. In fact, tests show that a duraflame® firelog has 66% less creosote accumulation per hour of fire than the creosote accumulation from burning a wood fire.

Is oak a good firewood?

1. Oak: Known for its long, slow burns, oak is likely the best firewood wood. Oak is a dense hardwood available throughout most regions of North America. While oak wood can take a little longer to become properly seasoned than other firewoods, the fire from well seasoned oak in your wood stove can’t be beat.

What burns hotter oak or almond?

Depending on your location, almond firewood can be twice as expensive per cord as oak firewood. However, you may use less almond wood since it burns hotter and cleaner than oak, making a direct price comparison more difficult.

Is Silver maple good firewood?

Maple firewood provides good heat.

Although it has a lower density than other hardwoods, like oak, it is very easy to burn, burning cleanly and splitting well.

What wood burns hotter?

The hottest burning wood is Hardwood. Hardwoods like ash, birch, oak, maple, and most fruit trees are the best burning woods that will give you the hottest and longest burning time. These woods have sap, pitch and are cleaner to handle than the softwoods.

Can you put too much wood in a fireplace?

Simply put, yes, it’s possible to put too much wood in a fireplace. It can cause immediate and future problems. For your safety, build smaller fires, which are actually hotter. By building a smaller fire and not putting too much wood in, you can enjoy a less smokey, warmer fire that is safer.

Is pine a good firewood?

Burning Pine Firewood

Pine is an excellent choice for firewood, particularly if you plan to use it as kindling outdoors. It is a wonderful fire starter, particularly because it has so much resinous sap. This sap acts as a good ignitor, helping you to get a fire started quickly and easily.