What do I need to connect a gas dryer?
Your gas dryer will need an appropriate gas hookup. The gas line should have a supply valve in the same room where you intend to install the dryer, preferably within 6 feet (1.8 m) of the unit. If there is no gas pipe in the laundry room, you will have to have one installed by a qualified technician.
What kind of pipe do you use for a gas dryer?
Loose fittings can cause gas leaks in your home; thereby, endangering all its residents. Also, gas dryers need approved hook ups that go with the new piping system. The material should be made of yellow brass or flexible stainless steel tubing to avoid corrosion.
Can I install a gas dryer myself?
Not only is self-installation a cheaper option, but it’s also pretty simple to do, even for the non-DIY’ers. While the installation instructions for electric and gas dryers are a little different, both of them can be done with a few tools, a bit of patience and some great directions.
What is needed to make a laundry room?
- 7 Tips for a Functional Laundry Room. …
- Stay Organized with Laundry Baskets. …
- Make Sure the Floors and Counters Are Water-Resistant. …
- Integrate a Built-in Work Table in Your Laundry Space. …
- Save Room for a Utility Sink. …
- Include a Drip-Dry Rack or Hanging Rod. …
- Keep Your Decorating Theme. …
- Incorporate Plenty of Storage Space.
- Measure the inside dimensions. Before you do anything else, you should make sure the washer and dryer will fit inside the space. …
- Empty the closet out completely. …
- Protect the floor from possible leaks. …
- Install the water and drain lines. …
- Install the proper size power outlet.
What size gas line is needed for a gas dryer?
The gas line must include 1/8″ NPT minimum plugged tapping accessible for test gauge connection, immediately upstream of the gas connection to the dryer. 1/2″ IPS pipe is recommended. 3/8″ approved aluminum or copper tubing is acceptable for lengths under 20 ft (6.1 m) if local codes and gas supplier permit.
How do you run a gas line to a gas dryer?
Quote from the video:
Quote from Youtube video: This is our vent to outside and here's the 110 volt connection will plug in and that just drives the motor to tumble those clothes awesome alright we should get started by shutting off the gas.
How do you build a small laundry room?
Quote from the video:
Quote from Youtube video: I made a card out of plywood. And small plastic bins but I added some casters onto. So they could roll into the space that's behind the walls to the side of the laundry machines.
How many receptacles are required in a laundry room?
one receptacle outlet
Section 210.52(F) requires at least one receptacle outlet to be installed for the laundry in a dwelling unit. Two exceptions appear immediately after this general rule.
How much space is needed for a laundry room?
Based on nearly 40 years of dealing with laundry rooms, I feel the minimum size for one of these rooms should be 9 feet wide by 11 feet long. Bigger is better. The door leading into the room should be at least 32 inches wide.
How deep is a laundry room?
Washers and dryers placed side by side typically require a horizontal space of 60 inches or five feet. Measure the depth of the appliances (most are around 33 inches) and add six inches for hoses and venting. Allow one inch on each side and between appliances to reduce noise from vibrations.
How much space is needed behind a washing machine?
Around six inches of space behind your washer and dryer is ideal. Space can be saved behind a dryer by installing a periscope dryer vent. This helps ventilate the areas quickly and thus allows the dryer to sit closer to the wall.
How much space should be between washer and wall?
While measuring, make sure to allow for at least six inches of space between the back wall and the appliance for hoses and ventilation, as well as one inch of clearance between the washer and dryer for side-by-side units.
How do I fill the gap between my washer and dryer?
To stop this frustrating game of hide-and-seek from ever happening again, go to the home center and buy some inexpensive foam pipe insulation to fill the gap between your washer and dryer. Take the pipe and simply wedge it between the two appliances.
How much depth do you need for washer and dryer?
Front-Load Washers and Dryers
| General Dimensions of Front-Load Washers and Dryers | Compact | Full-Size |
|---|---|---|
| Width | 24 inches | 27 inches |
| Height | 34 inches | 39 inches |
| Depth (door closed) | 24 inches* | 32-34 inches* |
| Depth (door open) | 42-44 inches* | 54-57 inches* |
How much space do you need for a washer and dryer closet?
30 inches at a minimum. And you’ll need about 45 inches to clear a 90 degree turn comfortably with a large washing machine or tumble dryer.
How do you turn a closet into a laundry room?
How to Convert a Closet into a Laundry Room
Can you put a washer and dryer in a closet?
Putting a washer and dryer in your bedroom closet wouldn’t be permitted even if there’s room for one. You’ll have to submit an architect’s plan for review by your board. City permits—If you are adding new electrical and plumbing, you’ll need proper city permits for either a house or an apartment.
