A vibrating Multi-Tool (Dremel multimax etc) will work great on this. Mark with a line and cut freehand, you can easily get within 1/8th inch. This was the perfect tool. Made short work of the job!
What tool do you use to cut out drywall?
The Razor Knife
The most commonly used tool for cutting drywall is the razor or utility knife. You score the panel, apply some pressure, and snap!
How do you cut drywall strips?
Youtube quote:One method for cutting narrow strips of drywall is to position a plastic speed square along the edge. And press the knife's blade against the square. So the tip overhangs.
Can a box cutter cut drywall?
Youtube quote:And all I got to do is just a little bit of pressure just to cut through that first layer of paper on the drywall. Just take your time go slow just to get a nice.
How do you cut drywall with a Dremel?
Youtube quote:Now plug your tool in and set the tool at maximum speed plunge the blade straight in then work the blade in the desired direction of the cut beginning at one of the corners.
Can an oscillating tool cut drywall?
For getting precise cuts in less time, an oscillating multi-tool is the best tool to cut drywall with. Your other drywall cutting tools might still come in handy for some of your cuts, but an oscillating multi-tool can be great for long, straight cuts as well as smaller precision cuts.
Can you cut drywall with a utility knife?
Score Drywall
With a sharp utility knife or other cutting tool, follow the pencil line and lightly cut through the paper layer of drywall. Tip: The best tools for cutting drywall are utility knives, putty knives, reciprocating saws, oscillating multi-tools and track saws with dust collectors.
How do you cut drywall without cracking it?
Youtube quote:So I have a 16th of difference but that is more than good enough for drywall. If you're going to a sixteenth of an inch with drywall you're gonna have a lot of blown out corners.
How do you cut drywall without breaking it?
Youtube quote:And that is what they do is they take a utility knife and they look at that razor.
How do you cut drywall edges?
Youtube quote:The line of the material or you're cutting it too is you just need to cut it a little bit higher so it was about a quarter inch on this side to 1/8. So if I go more like 3/8.
Can I use a rotary tool to cut drywall?
The Dremel 561 cuts hard wood up to 3/8″ and soft wood up to 5/8″. Also cuts plastics, fiberglass, drywall, laminate, aluminum and vinyl siding.
Is a Dremel the same as a Rotozip?
The Dremel is a great, all-around tool for grinding, cutting, carving and polishing. It is better at working in the tiny places (like behind your bathroom toilet) than the larger Rotozip is. The Rotozip is an even more robust, contractor-grade tool designed specifically for cutting sheetrock and ceramic.
Can you use a rotary tool for drywall?
Youtube quote:Type tool like this rotary tool you want to go if you're on the outside of the object you're cutting to as a guide you want to go counterclockwise.
Will a Dremel tool cut drywall?
A Dremel is best used to cut holes in drywall that have specific curves and turns. You can cut drywall with a Dremel equipped with this drywall cutting bit. Use a Dremel to cut detailed lines with curves and turns. A Dremel is best used to cut holes in drywall for pipes and electrical boxes.
How do you cut drywall fast?
Youtube quote:Hold it tight together measure. Down the desired length. And we're going to drag it across and make our cut at that point our cuts made. And we can pop it and cut the back side.
How do you use a drywall Zip tool?
Youtube quote:Simply rock the bit to the middle of the material. And cut to the edge until you can feel the side of the heating duct.
How do you cut a straight line with a RotoZip?
Youtube quote:Simply cut in a clockwise motion around the desired object. Keep firm pressure on the back of the tool as well as a guiding hand on the ándale.
How do you cut a RotoZip with drywall?
Youtube quote:To cut around an outlet box plunge into the center of the box then cut toward the right until you reach the inside edge of the box. Back. Out just far enough so you can slip over the top of the edge.
