Remove the hoses from the wall. Turn the ends counterclockwise until the hoses detach. You may need to use adjustable pliers or a pipe wrench to loosen the hoses, especially if the machine hasn’t been disconnected in a while. Once you’ve removed them, drain any remaining water into the bucket.
How do you unplug a washing machine?
Youtube quote:Machine away from the wall. If working alone grab one side and move it forward then do the same with the other side if you have help try pulling on opposite sides simultaneously.
How do you loosen a washing machine connector?
Youtube quote:And then split the ring now you want to be very careful that you don't cut through this metal and begin to cut the the actual threads on the hose bib itself it's going to be real careful about that.
Do I need a plumber to disconnect a washing machine?
Before connecting the washing machine, make sure that the transit bolts have been removed from the back of the machine. If you prefer not to risk it, or the new machine is different from the old one, you can call a plumber.
Is it easy to disconnect a washing machine?
To disconnect a washing machine, turn off the water valves located behind the washing machine by turning them clockwise. Next, pull the machine away from the wall and unplug it. Place a bucket behind the machine to catch water drainage, then turn the ends of the hoses counterclockwise to detach them from the wall.
Which way is off on a washing machine valve?
Youtube quote:And I'm going to turn it counterclockwise. So it is not lined up with the hose. That is an indication that the water supply is off.
How do you know if a valve is open or closed?
Ball valves are perhaps the easiest valve to see if they are open or closed. If the handle on top is parallel to the valve, it’s open. Likewise, if the handle is perpendicular to the top, the valve is closed.
How do I know if my washing machine valve is open?
In order to tell if the valve is open or closed, the general rule is, if the handle is switched 90deg to the flow, it is off. As you can see from the diagram above, if the handle is in line with the flow path, it is on.
