The general recommendation is to have 1/3 to 1/2 of the post’s height above ground buried below ground. For a 4′ tall post, you’d want about 2′ below ground. For an 8′ post, you’d want 3-4′ below ground.

How far should the post be from the concrete?

The Post should end up 6′ 4″ high from the ground to the top of the post. Do I put concrete in the hole? You can either put gravel in the bottom of the hole for Drainage or you can put concrete in the hole and stab the post into the wet concrete leaving 78” from ground to post top.

How much of a post should be below ground?





The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet). Add about 6 inches of QUIKRETE All-Purpose Gravel into the bottom of the hole.

Can you set a post directly in concrete?

Quote from the video:
Quote from Youtube video: And easiest way to set your post is to use quikrete fast setting concrete. Because there is no mixing you simply pour it into the hole. Dry.

How do you put a fence post next to foundation?

Quote from the video:
Quote from Youtube video: Next up on the list should the concrete encase the entire wood post or should the bottom of the wood post stick. Through the concrete. And this one here is debatable. I have seen them rot both ways.

How deep should an 8 foot post be in the ground?

For an average fence post, about 6 to 8 feet tall, prepare to dig a post hole about 2 feet deep. To install a fence post, you’ll need a shovel or post digger, a 6-foot level, soil, and gravel or crushed stone.

Can you put dry concrete in a post hole?





Fast-setting concrete is ideal for setting posts because there’s no mixing—you simply pour the dry concrete from the bag right into the hole, then add water.

How do you install a 4×4 post on concrete?

Quote from the video:
Quote from Youtube video: Remove the base and then drill into the concrete using a hammer drill. And masonry drill bits. Move the post support back over the holes.

How do you put a fence post in concrete?

Quote from the video:
Quote from Youtube video: Attach a length of wood to the post and stakes to form a basic support brace holding the post upright while you position it straight use a level to ensure the fence post is perfectly vertical.

How do I fill the gap between fence post and house?

Quote from the video:
Quote from Youtube video: Here this dummy post here what we call or a puppy saver gap bill or whatever and then I went ahead and I put these brace bands over here on this side.

How do you fill the space at the bottom of a fence?



Quote from the video:
Quote from Youtube video: And if the gap isn't too big and maybe you could simply go down to your local Home Improvement Center. And pick up some bricks and fill the area with them. Another idea might be rotating.

What is a kickboard on a fence?

A rot board, also called a kickboard, is a horizontal board installed along the bottom of the fence panel. Typically a 2×6 or 2×8 piece of wood, it runs along the base of the entire fence panel for a finished look and added protection.

What should I put on the bottom of my fence?

Rocks and boulders are a simple choice for areas of the fence that have a slight gap, or even for areas that have a long gap that runs along the fence. Use the rocks to build a retaining wall along the bottom of the fence, or create a rock garden.

How do I keep my wooden fence from rotting on the bottom?



To keep the wood from rotting, apply a wood preservative to seal it. “It’s like wax on a car,” Holt says. “It helps protect it from the elements, from water, from sprinklers.” Water-repellent preservatives and sealants are sold at home-improvement and hardware stores.

What can I put on the bottom of my fence to keep my dog in?

You can use chicken wire, hardware cloth, or a piece of chain-link fence attached to the base of the fence. Some people bury it for aesthetic reasons. But you can also lay it on top of the grass and hold it down with rocks, gravel, mulch, or even planters. Pour a concrete footer.

What do you put under a wooden fence?

Effective Barriers With Gravel Boards



There are options when it comes to sheltering your wooden fence from the soil: you can install gravel boards along the bottom, set your wooden posts in concrete, or use concrete posts from the outset.

Should a wood fence touch the ground?

In most applications, a wood fence should be installed at least two inches off the ground. Your posts and rot boards (if you choose to install them) should be the only fence components that contact the ground. Wood pickets should never touch it.

Can I put dirt against wood fence?



2 Answers. Show activity on this post. Having dirt touching the fence will increase the chance that the bottoms of your rails/pickets will rot. This doesn’t necessarily mean your whole fence will rot; only the parts exposed to heavy moisture are at risk.