You may have a faulty sensor, sticky motor, bad controller board, too many closed dampers, a blocked air return, incomplete combustion, cracked heat exchanger, blocked condensate line, etc etc. some of these things are life-critical situations.

Why do I have to keep resetting my furnace?

A furnace reset button is an important feature included with your HVAC system. Designed to quickly shut the unit off, the function is key to safely heating your home. If your furnace reset button keeps tripping, it’s likely that your furnace is overheating. This may indicate a need for furnace repair services.

What would cause a electric furnace not to kick on?

Electric Furnace Won’t Turn On

Often, the issue is as simple as the unit is turned off, the breaker tripped, or a fuse has blown..

How many times can I hit the reset button on my furnace?


Don’t hit “reset” more than twice. The process pumps oil into the burner chamber, where it can accumulate if you have no ignition. Then when the furnace finally does start, it can do so explosively. So if the button won’t reset, or quickly pops up again, it’s time to call a professional repair service.

Why does my furnace only work sometimes?

Dirty filters are the most common cause of furnace problems. Dust and dirt restrict airflow—and if the filter gets too clogged, the heat exchanger will overheat and shut off too quickly, and your house won’t warm up. If the blower is running but no heat is coming out, replace the filter.

How long does it take for furnace to reset?

Leave the breaker(s) off for at least 10 minutes while the system is off and “rebooting.” After 10 minutes have elapsed, go back to the breaker box and flip the HVAC breaker(s) back on.

Why does my furnace only run for a few minutes?

If your furnace shuts down after a few minutes, it’s likely due to a faulty or unhygienic flame sensor. This crucial component intends to monitor the gas burner. Also, when a flame sensor cannot detect the burner, the furnace runs for a few moments before shutting down and restarting.

Can hear your furnace click on but it does not fire up?

If your gas furnace initiates the start cycle but does not fire up, it’s likely because of a faulty, damaged, or dirty ignitor/sensor. This is a very common furnace problem—you can try to clean the sensor and replace the ignitor.

What are some of the most common issues for electric furnaces?

What Are The 10 Most Common Furnace Problems

  1. Thermostat Isn’t Working. …
  2. Dirty & Clogged Filters. …
  3. Flickering, Weak or Oddly Colored Pilot Light. …
  4. Cracked Heat Exchanger. …
  5. Malfunctioning or Frayed Blower Belt. …
  6. Frequent & Over-Cycling. …
  7. Limit Switch Malfunction. …
  8. Furnace Isn’t Blowing Air.

Why is my furnace not responding to thermostat?

When a furnace is not responding to a thermostat, there is either a problem with the heating unit or the actual thermostat. Lack of power to the thermostat, wrong settings, and outdated software might be to blame, as well as faulty wiring, a tripped breaker, and a dirty furnace filter.

How do I know if my limit switch is bad?

Limit Switch Malfunctions

One common symptom of a malfunctioning limit switch is a blower fan that doesn’t shut off. This happens when the switch fails to shut off after the burners have stopped and the air exchanger is sufficiently cool. A bad switch also can prevent a furnace from operating at all.

How do you restart a furnace after a power outage?

All you need to do is go over to your furnace and locate a reset button. It’s typically red or yellow. If it’s been tripped during an outage it will probably be raised. Make sure that you press this button down to make sure that the furnace is ready to run again.

What does the reset button on a furnace do?

Turn the power and main gas supply on the back again. After doing all this, press the reset button, hold for 30 seconds and release it. The furnace will restart, and then you can adjust the thermostat’s setting.

How do I reset my furnace switch?

Quote from Youtube video: You can give us a call if it doesn't reset. We might be able to help you over the phone it could be as simple as a pump filter. After you've got that. Code. You're gonna come to a light switch it can

How do you restart a furnace?

How Do You Reset a Furnace? The Ultimate Guide

  1. Find the switch mounted on or near the furnace and turn the power off. …
  2. Wait about 10 seconds.
  3. Turn the switch or breaker back on and check the furnace to see that it has power again.

Can you reset a furnace limit switch?

You can try resetting the furnace limit switch yourself if you have a newer model by turning off the furnace for 30 seconds and then turning it back on. However, if this does not work or the furnace repeatedly shuts down, calling heating experts to reverse or reset the limit switch is a good idea.

How do I reset my furnace thermostat?

Turn your thermostat “off”, then flip the related circuit breaker “off”. Wait 30 seconds, then turn the breaker back “on,” then the thermostat. Set the thermostat to hot or cold, whichever you prefer, and your desired temperature. This should effectively reset it.

How do I fix an unresponsive thermostat?

If the thermostat is still unresponsive, make sure the breaker is shut off and remove the cover. If it looks dirty inside, use canned air or a soft artist brush to clean away accumulated grime that may be affecting its functionality. Then look for issues like loose wiring or terminal screws and tighten them up.

Will a furnace run without a thermostat?

Quote from the video:
Quote from Youtube video: This is going to turn on the fan.