According to Qlima website, the heater is equipped with oxygen depletion sensors (ODS). These sensors can tell how much oxygen is left in the air. If the oxygen level decreases then this activates the sensor and the gas shuts off to the logs.

Why does my gas heater keep turning off?

If your furnace keeps shutting off, it could be due to low airflow. There are several indirect issues that cause low airflow. Dirty Air Filters. If you don’t change your air filters often enough, the filters will become dirty and clogged, which means the heat exchanger retains heat and eventually causes it to overheat.

Why does my ventless propane heater keep going out?





If the thermocouple is too far from the flame, this can cause the pilot to go out and shut down the propane heater; you can fix this easily by moving the thermocouple closer to the flame. The thermocouple could also be worn out, in which case it needs to be replaced.

Why does Wall heater keep turning off?

If your wall heater is cycling on and off every 15 seconds, and you are controlling your heater with a digital thermostat, then you likely need to update one of the thermostat settings. If you have a TH401, in the Set Up Menu, change the Heating Cycle from “Std” to “Fan”.

How do I turn on my Cadac gas heater?

Quote from the video:
Quote from Youtube video: Death you will hear a loud clicking. Sound continue to hold the control knob down for at least 10 seconds more once they reach an affiliate marketer. Now release and turn to your gundalia.

Why does my propane pilot light keep going out?

A faulty, misaligned, dirty, or damaged thermocouple is often the culprit behind your pilot light going out. The thermocouple is an automatic safety shutoff device that prevents the gas valve from opening if the pilot light is out.

How long can a gas heater stay on?





Do not operate for more than 4 hours at a time. Unvented gas heaters are designed for supplemental use only. Do not use unvented heaters in bedrooms, bathrooms, or confined spaces.

What do you do when your gas heater stops working?

Check to make sure power to the furnace is on.

  1. There’s a power disconnect switch by the furnace, even gas systems use electricity. Check the fuse/circuit breaker at the electrical panel for the furnace to make sure the breaker has not tripped. …
  2. Check to make sure the gas valve to the furnace is open.


How do you clean a thermocouple on a gas heater?

In cleaning a thermocouple, you need some steel wool or 60-grit sandpaper, and a cloth. First, turn off the gas supply, unscrew the thermocouple and then clean it with steel wool or sandpaper then wipe down with a cloth to remove residue. I clean our thermocouple every six months to avoid getting it coated with soot.

How do I stop my pilot light going out?



Dirty Thermocouple



If it’s filthy shut your gas off so that the unit can cool down, then gently clean it by carefully rubbing it with fine grain sandpaper. When you’re done, simply turn the gas back on and light the pilot again. If dirt or grime was the issue, your light shouldn’t go out again!

How do I make my pilot light stay lit?

Quote from the video:
Quote from Youtube video: I don't advise using a torch to do this but this is all I have at the moment so once you hold the tube down well first of all we turn this on. -. So I'll turn the gas on.

How do I stop my pilot light from blowing out?

You should hold down on the pilot light for at least five seconds once it is lit before letting go. This will ensure your pilot light won’t blow out right after you light it.

What does it mean when your pilot light won’t stay lit?



The Buildup of Dirt or Debris Around The Pilot Light – Over the years it’s easy for dust, debris, and dirt to build up on the inside of the intake valve where the pilot light resides. This makes it difficult for the flame to breath and as a result causes the pilot light to go out suddenly.

Do I need to turn gas off if pilot light goes out?

If the pilot light of an appliance goes out, turn off the gas at the appliance for several minutes before attempting to re-light it. Instructions should be attached to the appliance.

Why does my gas fireplace light and then go out?

Fixing the pilot light may just require that you replace the fireplace thermocouple. There’s a possibility that this component has gone bad or is simply worn out from prolonged use. If the problem doesn’t reside with the thermocouple, then it’s likely that the issues are stemming from a thermopile.

How do you fix a gas fireplace that won’t stay lit?

Quote from the video:
Quote from Youtube video: It won't it takes a while to push the gas through so don't be surprised if you've got to hold it for a while. So nothing is happening i'm getting spark.

How do I make my fireplace stay lit?



Quote from the video:
Quote from Youtube video: So here's your flame rod sensors. You're just gonna polish them up lightly with a piece of 1500 grit sandpaper. You want to get all the way around it.