The bad answer is that there is something in the socket or wiring that have too much resistance to allow the small current draw of the lamp, but will let the big current of the washer to go through. A test would be to plug a toaster, hair dryer or electric heater into the washer socket and see if it works.

How can I have power to my outlet but nothing works when I plug it in?

If your outlet has short circuited or been overloaded, then your circuit breaker may have shut off its power. Check other nearby outlets to see if they are working. If they also are dead, then go to your circuit breaker. When a circuit breaker has tripped, the lever will usually flip to the middle or off position.

Can I plug other things into washer outlet?





Standard household electric power in the United States is 110 to 120 volts, with a 60-cycle alternating current, and most household washers can be plugged into wall outlets supplying this current.

Why would electrical outlets stop working?

Common causes when a wall socket stops working include: Failed internal socket connections, which is common in older outlets that no longer snugly hold plugs. A tripped circuit breaker that cuts power to the wall socket. Loose connections within the circuit breaker box.

What would cause an electrical outlet to work intermittently?

Any time there are outlets that intermittently don’t work, it is cause for concern. A loose connection can not only cause an intermittent interruption of the power supply, but will tend to overheat and can pose a fire hazard. In my experience, apartments in old houses often have marginal-to-inadequate power supplies.

Why do my outlets work but not my lights?

The problem may be a loose connection or a tripped wall outlet on the same circuit. The first thing you’ll need to do is turn off power to the light switch before handling it. When you’re sure the breaker is off, remove the cover plate and unscrew the switch.

Can a bad outlet cause other outlets not to work?





Old House Circuit Breakers



Many older homes have all of the electrical outlets in a room or an area of the home all connected on a single circuit breaker. With old homes like this, a bad outlet may cause all of the other outlets in that room to stop working because it will trip the breaker.

Does a washer require a dedicated circuit?

In the Laundry Room



Your laundry room should have a dedicated circuit of at least 20 amps. If you have a gas dryer, both your washing machine and gas dryer may be plugged into the same outlet. If you have an electric dryer, it will need its own dedicated 20-amp, 220-volt circuit.

Does a washing machine use a regular outlet?

Washer –Washing machines are large appliances that do not require customized electrical hookups, they simply need a 120 volt outlet that can take 3 prongs.

Does washer outlet need to be GFCI?

GFCI Protection:



210.8(A)(10) – All 125V, 15a and 20a receptacles installed in “Laundry Areas” shall have GFCI protection. The NEC doesn’t require GFCI protection for clothes washing machines specifically, but it does for “Laundry Areas.”

Why would an outlet stop working and then work again?



If the power was restored to the outlet after you flipped the breaker, you might have overloaded the circuit. An overloaded circuit (each switch in the breaker panel controls a separate circuit) can happen if you plug too many things (especially heat-generating appliances) into the same circuit.

Why are my outlets not working but breaker not tripped?

Yes, the outlet can fail without tripping the breaker – failed or dead outlet means that the power is not present and this can be caused not only by tripped breaker (which is not in this case) but can be also caused by damaged electric breakers, bad/loose wiring, failing connectors, and similar.

How do you know if you have a faulty outlet?

Watch out for these signs that your outlet is due for a replacement.

  1. Outlet Replacement Sign 1: The Outlet Is Not Working. …
  2. Outlet Replacement Sign 2: Burn Marks or Melting. …
  3. Outlet Replacement Sign 3: Cracks and Chips. …
  4. Outlet Replacement Sign 4: Plugs Fall Out Easily. …
  5. Outlet Replacement Sign 5: Outlet Feels Hot to the Touch.

What would cause the power to go out in only one room?



Why Is the Power Out in Just One Room? Tripped breaker: The localized outage could be caused by a tripped circuit breaker. This can happen if a circuit is overloaded or has been spiked by a defective appliance. Unplug all of the appliances in the room, and check your breaker.

Why is half of my house without power without flipped breakers?

Well usually when “half” of something dies in residential electrical, it means one hot leg is down. This could be an issue at the transformer, the wiring to your meter, the meter itself, the wiring from the meter to your main panel, the main breaker or a fault within your panel.

What to do when half the lights and outlets stop working in your house?

Look for a Tripped Breaker



Then, locate your circuit breaker panel, formerly known as your fuse box (often in the basement or garage, or in the back of the house). One of the switches should be down – this is the one that has tripped. Simply flip it up to restore power.

Why are my outlets not working but breaker not tripped?

Yes, the outlet can fail without tripping the breaker – failed or dead outlet means that the power is not present and this can be caused not only by tripped breaker (which is not in this case) but can be also caused by damaged electric breakers, bad/loose wiring, failing connectors, and similar.

How can you tell if a wall outlet is bad?



Watch out for these signs that your outlet is due for a replacement.

  1. Outlet Replacement Sign 1: The Outlet Is Not Working. …
  2. Outlet Replacement Sign 2: Burn Marks or Melting. …
  3. Outlet Replacement Sign 3: Cracks and Chips. …
  4. Outlet Replacement Sign 4: Plugs Fall Out Easily. …
  5. Outlet Replacement Sign 5: Outlet Feels Hot to the Touch.

How do I reset my electrical outlet?

Quote from the video:
Quote from Youtube video: So what that means is this outlet has been tripped now it's a very complicated procedure to reset it basically you put lean over. And you push in the button.

Do electrical outlets go bad?

Just like everything else, electrical outlets have an expiration date. They will perform their function for a while but eventually a time will come when they get worn out. A worn-out electrical outlet will either stop working completely or it will give you lots of problems.

How can you tell if a house fuse is blown?

For a fuse box: If your electrical panel has fuses, check each fuse to see if the piece of metal inside has melted, or if the glass window at the top of the fuse has become discolored (usually purple or brown). That’s your home’s blown fuse.

How do I find a dead electrical outlet?



Quote from the video:
Quote from Youtube video: So you want to make sure your scanner picks it up. So there's a metal contact the end of the probe. Here. So you connect it you can hear it you can hear it trace the wire.

Why is only one outlet not working?

A bad connection, outdated wiring, or a tripped circuit breaker can cause a malfunctioning outlet. But there are instances where only half of an electrical outlet works and the other one doesn’t. It can happen for multiple reasons, and it is wise to call an electrician to look into the issue.

How do I find an electrical short in my house?

First, you’ll need a multimeter. Although this device checks for voltage, it can also check for continuity. By checking both ends of the wire for power, you can tell whether or not you have a short. Before testing, set your multimeter function to continuity mode.