There are a couple of possibilities for how this could happen, but the simplest theory is that you failed to reconnect the wire feeding those outlets to the LOAD side terminals on the GFCIs. Turn the power off to the kitchen circuits and check in the GFCI-containing boxes for loose/unconnected wires.
Can a GFCI outlet make the other outlets not work?
GFCI Outlets
When they say that a bad outlet can cause the other outlets to not work, that usually refers to the normal outlet that you use every day to plug in your devices. However, the reason the other outlets aren’t working may actually be linked to another type of outlet — a GFCI outlet.
What would cause 2 electrical outlets to stop working?
One or more of your outlets might be affected by a loose wire, which means that the wiring either has gradually loosened over time or was never connected correctly to begin with. This can affect all the other outlets on the same circuit, causing them to malfunction (or rather, stop functioning) as well.
Can GFCI and regular outlets be on same circuit?
Yes it is accepted and code. The GFCI will only protect what is downstream though.
What happens if you replace a GFCI outlet with a regular outlet?
GFCI’s can wear out. If you’re willing to give up the protection then yes, you can switch back to a normal grounded outlet and the wiring should be basically the same. You’ll need a new face plate, of course, unless you get a duplex that has the same rectangular outline.
How do you know if your GFCI outlet is bad?
If the GFCI won’t reset or the button doesn’t pop out when you press the “test” button, there may be no power to the GFCI or you may have a bad GFCI. Pro tip: If the “reset” button trips again every time you press it, there may be a dangerous current leak somewhere on the circuit.
What happens when a GFCI outlet won’t reset?
If the GFCI won’t reset, it could be because there is no power supply to the GFCI, or the GFCI may have gone bad. Note: If the GFCI trips every time you reset it, then there may be a dangerous current leak somewhere in the circuit. In that case, you may want to seek help from an electrician.
How do you reset a GFCI receptacle?
First, unplug the appliance you were using and any other appliances plugged into the same circuit as the GFCI. To reset a GFCI outlet, look carefully at the two little buttons on the front of the outlet. Press the one that says RESET. Usually, the RESET button is red, while the TEST button is black.
What do you do when your outlet stops working?
Tripped Circuit Breaker
If an outlet isn’t working, check your circuit breaker panel. The breaker that is tripped will appear to be between the ‘on’ and ‘off’ position. Flip the switch to off, then back to on. This will reset the circuit and potentially fix your broken outlet.
How do you fix a dead electrical outlet?
- Step 1: Make sure the problem isn’t with the appliance. …
- Step 2: Check for a switch to the outlet. …
- Step 3: Look for a tripped GFCI breaker. …
- Step 4: Check the breaker panel. …
- Step 5: Tighten the outlet electrical connections. …
- Step 7: Call an electrician.
Are GFCI outlets required in older homes?
Older homes are not required to have GFCI outlets unless the wiring is being updated, but it’s a good idea to install them anyway. The NEC requires GFCIs on all exterior and bathroom receptacles (another term for outlets). GFCIs are also required on all receptacles serving kitchen countertops.
Why does my GFCI outlet keep tripping with nothing plugged in?
What Causes A Breaker To Trip When Nothing Is Plugged In? You have to consider the possibility that the GFCI is defective or damaged. This happens all the time. Though, if you don’t believe that the GFCI has gone bad, It is also due to the damaged input wire.
How do you do the ground wire trick?
A false ground or bootleg ground involves using a jumper wire to connect the ground screw and the neutral screw on a receptacle. False grounds will fool the handheld testers most inspectors use to check for open grounds. This is a common trick used by misinformed do-it-yourselfers and some clueless handymen.
How do you test for false ground?
Quote from the video:
Quote from Youtube video: A correct polarity bootleg round and it shows the hot neutral or correct but it shows an F blinking in the middle of the ground pin.
Can you install a GFCI without a ground?
Yes, a GFCI Outlet can be installed even if a ground wire is not available in the existing electrical circuit. The GFCI outlet must be marked with a provided label that the outlet is not grounded. The GFCI will still protect the user against ground fault just the same.
What is a false ground on a receptacle?
In building wiring installed with separate neutral and protective ground bonding conductors (a TN-S network), a bootleg ground (or a false ground) is a connection between the neutral side of a receptacle or light fixture and the ground lug or enclosure of the wiring device.
What happens if you don’t ground a metal box?
The overriding concern is that the application should be grounded. Metal-sheathed wiring depends on bonding with the metal electrical box for grounding. Using metal-sheathed wiring with plastic electrical boxes, without taking other grounding measures, severs that ground and is highly dangerous.
Can neutral and ground be on the same bar?
The answer is never. Grounds and neutrals should only be connected at the last point of disconnect. This would be at main panels only.
