To answer your question will they work with a 2 prong outlet NO there is no place for the spike to go.

Will a surge protector work on a 2 prong outlet?

Perhaps you think plugging devices into a surge protector, which you then plug into a “cheater” three-to-two prong adaptor to fit the old fashioned outlet, is the way to go. However, this does you no good at all. The fact remains that two prong outlets have no ground and therefore don’t benefit from surge protectors.

Is it safe to plug a surge protector into an adapter?





Yes it is safe, a travel adapter is simply a plug and socket built into one piece. Any current the power strip can handle up to circuit breaker tripping can be handled by the adapter.

Does a surge protector protect an ungrounded outlet?

Grounding is a critical element required for proper surge protection. In regard to the question about whether surge protectors work on ungrounded outlets, the answer is “no.” Surge protection equipment typically uses components called metal oxide varistors (MOVs) to divert excess current into the ground line.

Is it safe to use a two prong adapter?

If an electrical surge does occur while using one of these adapters, it can result in electrocution or an electrical fire. If you only have two prong outlets in your home, the safest option is to replace them. They are unsafe and unable to handle the demand of today’s electronic devices.

What should you not plug into a surge protector?

Here are some examples of high-capacity appliances that you should not plug into a power strip:

  • Refrigerators.
  • Washing machines and dryers.
  • Sump pumps.
  • Space heaters.
  • Portable air conditioners.
  • Microwave ovens.
  • Toasters.
  • Coffee makers.

How do you protect an ungrounded outlet?





You can fix ungrounded outlets by rewiring the electrical circuit or installing GFCI protection at the outlet or circuit breaker. Rewiring is the only option that will ground the outlet safely.

Is it OK to use an extension cord with a surge protector?

Can You Plug a Surge Protector Into an Extension Cord? On paper, yes, you can. The biggest thing is making sure the extension cord can handle the same amount of load as the surge protector (or more).

What appliances need surge protectors?

The devices and appliances you want to make sure you plug in, are the expensive ones with microprocessors into your surge protector. This includes TVs, refrigerators, dishwashers, ranges, AC units, PCs, laptops, game systems, and phones.

Are surge protectors necessary?

The answer is yes, it’s necessary because power surges can happen any time and no one’s prepared for a powerful surge. Given how power surges can occur at any time, there’s no worry about electronic device damage with a surge protector.

Where do you place a surge protector?



As most surge protectors are installed in parallel to the power panels, normally the best place to install the device is on the main service or panel feeding the facility.

Can a homeowner install a surge protector?

Protect your sensitive electronics from voltage spikes
Install a whole house surge protector to prevent your plug-in electronics from voltage surges caused by lightning strikes.

How much does it cost to have a whole house surge protector installed?

It costs $300 on average to install a whole-house surge protector, with a typical range between $70 and $700. Generally, that number will fluctuate depending on how high-end of a system you want, and if you’ll need an electrician to install it for you.

How big of a whole house surge protector do I need?



Whole-house systems should be rated to stop a 40,000-amp surge, at minimum. Features to look for include thermal fuses, and lights or alarms that indicate when a device has taken a hit. Protection for an average house with 200-amp service will run about $500—including a couple of hours of an electrician’s labor.

What is the difference between Type 1 and Type 2 surge protection?

Type 1 SPD is characterized by a 10/350 µs current wave. The Type 2 SPD is the main protection system for all low voltage electrical installations. Installed in each electrical switchboard, it prevents the spread of overvoltages in the electrical installations and protects the loads.

Are home surge protectors worth it?

At a minimum, power surges damage home electronics, appliances and wired services like security systems. Without proper surge protection, a voltage spike can even start a fire. Reduce this hazard with whole house surge protector installation.