1. Shut Off the Water Supply. Most of the time, but not always, the water line that feeds the outdoor faucet includes a valve to turn the water on and off. …
  2. Disconnect Any Hoses. If a hose is connected to the faucet, disconnect it. …
  3. Drain the Faucet. …
  4. Install an Outdoor Faucet Cover.

How do you winterize external pipes?

Steps to Winterize Your Outdoor Spigots

  1. Step 1: Disconnect your hoses. Before winter sets in you want to remove all hoses, splitters, or other fittings. …
  2. Step 2: Inspect your faucets for leaks. Check all your spigots and faucets for leaks or drips. …
  3. Step 3: Drain your spigots and pipes. …
  4. Step 4: Add outdoor faucet covers.

How do you protect outside water pipes from freezing?

Quote from the video:
Quote from Youtube video: Just wrap it really good with the towel. If you don't have any tape just wrap it as good as you can if you have tape wrap that towel and get some tape and wrap it around there.

What to wrap pipes with to keep from freezing?

One of the best and most cost effective methods for preventing frozen water pipes is to wrap your pipes with insulation. This is a common method of protection in the parts of your house that aren’t exposed to heat, such as an attic.

At what temperature should you wrap outside pipes?

Temperatures only need to drop to about 20° F for a few hours to put exposed pipes at risk. So, your best bet is to insulate your exposed pipes to keep that temperature well above the freezing point. This is just one quick tip, below we’ll fully answer the question of how to prevent pipes from freezing.

How do you winterize a house with a well?

Winterize your water well by first insulating the pipes with foam insulation sleeves. Make sure the well is securely covered and the pump is inside an insulated enclosure. The water inside the well cannot freeze since it is always below the frost line.

How do you winterize a house water line?

Steps for Winterizing Your Plumbing

  1. Shut off the main water valve, and then turn off the water pump and the water heater. …
  2. Open all drain valves and all taps. …
  3. Using air compressors, blow excess water out of the pipes.
  4. Open the drain valve in your hot water tank and let it discharge until it is empty.

How do you insulate exposed water pipes outside?

Quote from the video:
Quote from Youtube video: This method uses a towel a rubber band. And either a trash bag or a large ziploc bag wrap the towel around the hose bib a few times until it has a thick layer of material.

What is the best pipe insulation for outside pipes?

For many residential plumbing applications a PE pipe insulation product like Tubolit® and Tundra® is the perfect option. Economical and easy to install, PE foam insulation will prevent pipes from freezing and keep hot pipes hot and cold pipes cold.

How do you cover water lines outside?

How to Hide Exterior Plumbing Pipes

  1. Use Plants. One of the most popular ways to disguise exposed exterior pipes is to use plants. …
  2. Use a Wooden Box. A wooden box is a great option for pipes grouped together. …
  3. Use Decorative Objects. …
  4. Paint the Pipe. …
  5. Cover the Pipe. …
  6. Industrialize the Pipe. …
  7. Now You Know.

Should you drip hot or cold water to keep pipes from freezing?

Let water drip.

A trickle of hot and cold water might be all it takes to keep your pipes from freezing. Let warm water drip overnight when temperatures are cold, preferably from a faucet on an outside wall.

Should I turn off well pump in winter?

Since cold weather is the number one cause for a burst pipe, turning off your well pump will help protect your property. Also make sure that you have a well pump cover that fits securely. This will keep cold air from disturbing the pipes in and around the well pump itself.

How deep does a water line need to be to not freeze?

five to six feet

The classic rule-of-thumb procedure for avoiding cold-weather damage to water pipe is “bury it deep.” If water lines are located below the lowest level of frost penetration—five to six feet or more in many cold region locales—they should be safe from freezing.

Do wells need to be winterized?

When preparing to close your vacation home for the season, leaving the home vacant and unheated, you must winterize the plumbing to protect it from bursting in freezing temperatures. This process includes going through the steps to winterize your water well pump.

How do you drain water back from a well?

Locate the drain plug on your pump and open or remove it to empty the pump of any water it is retaining. If the water pump has a fill plug, open or remove it as well to empty more water. Remove the intake and suction pipes attached to the well pump and let everything drain completely.

Does well water freeze in winter?

Common Well Water Problems. Winter weather may cause a few common problems for homeowners. Wells are designed to access groundwater that does not freeze, which is why most of your well components are below the freeze line.

Do I need to insulate my well?

The well head and casing may not need to be insulated but all the plumbing that comes from the well to either storage or bladder tanks should be wrapped with material and/or electrical heat generating strips.

Should you cover your well head in the winter?

DO NOT use any well coverings. Even though the sight of your wellhead may not be your favorite thing, you should not cover it up with any fake rocks, gravel, treated wood, or wishing wells.