Adding an electrical outlet next to an existing light switch is easy, as long as there is a neutral wireneutral wireNeutral is a circuit conductor that normally completes the circuit back to the source. Neutral is usually connected to ground (earth) at the main electrical panel, street drop, or meter, and also at the final step-down transformer of the supply.

How do I add an outlet to a light switch circuit?

Quote from the video:
Quote from Youtube video: And insert it into the metal conduit. Until it gets to the light fixture. And then you would take the black wire of the romex. Tie it into this feed line right here tie it into this feed line pigtail.

Can a light switch and outlet on same circuit?





In your case it is okay to install a receptacle alongside the switch. However you need a neutral as well as a hot wire which you may not have. Test to see if you have a neutral with a test light or meter. The neutral will be white but some switches are wired up with a white wire that is not a neutral.

Can you wire a switch and outlet in same box?

Quote from the video:
Quote from Youtube video: Between the ends of my wires. And where the wiring enters into the box. This is per code and just making sure that we have plenty of wire to work with.

Can I pull power from a light switch for an outlet?

You can pull power from a switch box—sometimes



Switch boxes can sometimes be used as a power source for a new outlet, but only if the box is large enough and has neutral and ground wires running through it.

Can you run a spur from a light switch?

You’d probably do better running the spur from the nearest light fitting, or the CU (fuse box) unless there is as some have pointed out, a neutral at the light switch.

Can a bathroom outlet and light be on the same circuit?





The Bathroom Needs at Least Two Dedicated Circuits



This is no more. The bathroom electrical code now stipulates that the bathroom must have dedicated circuits that aren’t shared with outlets or lights in any other room.

Can you run a fused spur off a light switch?

You can install either a switched fused spur, which will also function as the on-off button or an unswitched fused spur alongside a conventional light switch.

Can I spur off a socket twice?

A spur can be connected to an existing socket, on either a ring main or a radial circuit, providing that socket does not already have a spur. That is only one spur per socket is allowed and the number of spurs must not exceed the number of sockets.

Can I spur off a socket for a light?

You need the neutral to make the light work but you can take a spur from the socket underneath the desk for a light, you could place a FCU next to socket underneath desk then run cable to light switch and then on to light fitting .. you cannot run spur to spur with sockets incase of over load of cable but a light is

How do I wire a receptacle from a light outlet but keep it hot when light is off?



In this case, you must change the cable from the switch to the light outlet from a 2-wire to a 3-wire cable. As you can see, connecting a receptacle to the light would see the receptacle only hot when the light switch is on.

How do you get power from a light fixture?

Quote from the video:
Quote from Youtube video: You do that by removing the mounting nuts located either on the side or on the inside of the light fixture. After that's done we're going to pull out our electrical.

How do you tell if a socket is a spur?

Quote from the video:
Quote from Youtube video: The line conductor from the other leg of the ring as you can see here. And then we do exactly the same but vice versa. So we connect the neutral from the other leg onto. The line of the first leg.

Can I install a fused spur myself?



As long as the job isn’t within a ‘special location’ such as a bathroom or outdoors, you’re also allowed to install additional new light fittings, switches, sockets and even add a single fused spur to an existing circuit (a ‘spur’ is a new cable and socket run as a branch from an existing socket on the ring main).

How many outlets can be on a ring circuit?

There is no limit to the number of sockets you can have on a ring main but there is a limit to the number of spurs you can have from those sockets or from the wiring between them. If you would like to know how to add a spur to an existing ring main, see our project on adding an extra socket.