Can you have 2 dimmers on the same circuit?
Yes you can have multiple dimmer switches on one circuit.
Can you have 2 dimmers on a 2 way switch?
Two way dimming allows you to dim a light fixture from two locations. You can’t use ordinary rotary dimmer switches to do this because you could potentially dim the light down to 10% with one dimmer, then walk over to the other dimmer and attempt to dim the light to below 0%.
Can you put a dimmer switch on a light that has two switches?
With a standard single-pole dimmer, a single switch controls the light. With a three-way dimmer, you can control a light with two switches. You will need a three-way dimmer and a three-way switch. This lets you dim from one location and turn the lights on and off from another.
How do you wire multiple dimmer switches?
Quote from the video:
Quote from Youtube video: These are interchangeable. Start by wiring the bear ground wire from the house to the green ground wire on the three-way switch screw on a wire nut and tighten it.
How many dimmers can you have on a circuit?
As @Tester101 says, with conventional dimmers, you can only have one dimmer in a circuit if the fixture (or set of fixtures) is being controlled from more than one location.
Can you have 2 dimmers on a 4 way switch?
With a 4-way configuration, you add a third switch between the two switches. If you want to add a dimmer, you must replace one of the 3-Way switches in the circuit. You don’t want to install multiple dimmers unless you have a unique brand that allows consumers to control the same light from different locations.
Can you have two dimmer switches on a 3 way circuit?
The answer is no. If you set up a 3-way switch for your light, there can’t be multiple dimmers. However, there are workarounds to this. Such as placing one dimmer on the line leading into the first switch.
Can I use two 3 way dimmers?
To the best of my knowledge, you can only have a dimmer at one end of the three way switching. Unless you find a brand of dimmer where the instructions show a dimmer at each end, you’ll have to make do with one dimmer only. “Common” 3-way dimmers are dimmers with a built in 3 way switch.
Can a 2 way dimmer be used 1 way?
Yes it can be used. You need to com and either of the other two terminals normally S1. more often than not if you ask for a one-way switch these days you’ll be given a two-way. as a two-way can be used as a one-way some manufacturers no longer make one-way switches.
What is the difference between 1 way and 2 way dimmer switch?
1 way is an on/off switch and means there’s only one place you can turn your light on or off. This is the most common kind of switch found in most homes. Most 2 way switches can also be used as a 1 way on/off switch. 2 way means there’s another switch controlling the same light.
What does L1 L2 and COM mean?
The single direction plane switch has two L1 terminals, the terminal to which the neutral cable is connected – the blue cable (traditional black, before changing). COM or Common is the terminal to which the live core cable is connected – this is the brown cable (red era).
How do you wire a 3 way dimmer switch?
Quote from the video:
Quote from Youtube video: The first is by wrapping the wire clockwise around the screw and tightening. It the second is by placing the wire under the screw terminal plate and tightening the screw.
How do you wire a 4 way dimmer switch?
Quote from the video:
Quote from Youtube video: And a four-way switch the circuit is going to start with a three-way switch your four-way switch is going to be the second switch. And the third switch going up to the light will be a three-way.
Why does my dimmer switch have 4 wires?
Since the switch cuts the power on and off, there will be a black wire coming into the switch and a black wire leaving. The whites are normally just connected together with a wire nut and the coppers are connected together with a wire nut or grounded to a metal junction box. So the new switch has four wires.
Can I put a dimmer on a light with 3 switches?
Dimmer switches can be installed on a three-way switch. This allows two controls to turn the light on and off, with a third switch left for the dimming function. Three-way switches can be used with single-pole applications when installing a dimmer switch.
How do I install a multi location dimmer switch?
Quote from the video:
Quote from Youtube video: Before you begin you'll need to turn your power off at the circuit breaker confirm the power is off by flipping the switch you're going to replace on.
