Consider using a sewer jetter to clean and remove dirt, sand, and yard debris that clog the foundation perimeter drain tile outside your home. A sewer jetter that’s powered by your pressure washer can help you flush away the silt and debris so fewer clogs come back.

How do you unblock a weeping tile?

Clean your weeping tile

  1. Fill the basin and weeping tile with water and liquid soap. Do not allow it to overflow.
  2. Leave the soapy water for 30 mins to neutralize the odor.
  3. Pull the plunger out to allow the water to drain.
  4. Repeat several times and then rinse with clean water.





What happens if weeping tile is clogged?

If your tile isn’t working, it can’t drain the water away, turning the ground very soft with pooling water. Other signs will show up when the problem becomes worse and affect the inside your basement.

Can drain tile get clogged?

Sometimes the signs of a clogged drain tile can be noticeable. You may see that water is pooling against your home, suggesting that your tiles are failing. On the interior, water may not be properly channeled, leaving you with a wet basement.

How do you clean drainage blocks at home?

How to Clear a Blocked Drain

  1. Boiling Water. For a quick and easy fix for your blocked drains, try pouring a pot of boiling water into the drain. …
  2. DIY Natural Cleaner. You can create a DIY drain cleaner using bicarb soda (baking soda) and white vinegar. …
  3. Caustic Cleaner. …
  4. Plunger. …
  5. Snake and CCTV. …
  6. Hydro-Jet. …
  7. Excavation.





Can you scope weeping tile?

Odds are, if you have water coming into your basement, your weeping tile might be a problem. The first thing to do is to scope it. Have a professional run an inspection camera down and see what the condition of the weeping tile is. If it’s bad, the best solution is to remove and replace your weeping tile — a huge job.

How do you know if your drain tiles are clogged?

Signs of a plugged drain tile system include water entering the basement or crawl space, lush grass growth, puddles, or a sinkhole forming along the line of piping.

How do you clear a partially blocked drain?

Try pouring hot water down the drain, then follow it with one cup of bicarbonate of soda and a cup of vinegar. Leave it for ten minutes, then chase it with more hot water. A combination of the hot water and the natural cleaner mixture can break blockages up.

What acid do plumbers use to unclog drains?



Hydrochloric acid

Hydrochloric acid, otherwise known as muriatic acid, is commonly used by plumbers around the world to clear a clogged rain. It is a strong acid that can cause serious injury if it is not used with care.

Will soda crystals unblock an outside drain?

If your drain isn’t completely blocked and is still slowly draining, you can consider using soda crystals or caustic soda to clear your blockages. This method is particularly effective against grease and fat blockages but less effective against other types.

Does weeping tile need to be replaced?



Over time, your home’s weeping tile system can become clogged with sediments, soil and more. However, having a clogged weeping tile system does not always mean that you need a replacement! High-pressure flushing provides an effective, more cost-efficient alternative.

How deep are weeping tiles buried?

between two to three feet deep

The weeping tiles sit in trenches dug in the soil below the tank, and they send the effluent to the leach field, dropping at least an eighth of an inch per foot. When installed, the pipes are at least half-a-foot in the ground, but most are between two to three feet deep.

Is weeping tile the same as a French drain?

A French drain (also called a weeping tile, drain tile, perimeter drain or sub-surface drain) is a common basement waterproofing solution. It’s a trench containing a perforated pipe that redirects surface water and groundwater away from the foundation.

How long does weeping tile last?



What is the life expectancy? Perimeter drains or weeping tiles can last for decades. If properly installed, you can expect to have a problem free basement for a very long time. Older clay weeping tiles tended to deteriorate, and become clogged with soil and tree roots, but even these systems lasted for many years.

Where does a weeping tile drain to?

storm sewer

Weeping tiles are porous 4-inch pipes used to discharge underground water by providing a drainage point that drains water accumulated at the base of your homes foundation. The water is then ejected into the storm sewer beneath your street or into a Sump Pump liner installed under your basement floor.

Where does water go from weeping tile?

When water flows into a weeping tile, the water can drain to a few places. Interior drain: The perimeter drain is connected to a pipe that runs inside the home and drains into a sump pit. If the water rises beyond a certain threshold, the sump pump turns on and pumps water out into the yard or storm sewer drain.

Can weeping tile freeze?



As the footings of the majority of foundations are typically 6.5 feet below grade, the lowermost 3 feet of soil above the footing and weeping tile never freezes; therefore, water that is present around the base of your foundation remains in liquid form throughout the year.

How do you clean footing drains?

Quote from the video:
Quote from Youtube video: Remember this is a perforated pipe surrounded by gravel and it's supposed to pick up the water as it pools along the foundation. And then carry it away we find the pipe.