What is the pipe in the basement floor?

Foundation drains are pipes that are installed under your foundation or basement floor to collect water and move it off-site to prevent your basement from filling with water.

How do floor drains work?





They’re built so that the concrete floor immediately surrounding the drain slopes inward so that water can collect in the drain and be carried away from the house. Most floor drains today direct water toward a collection pit where it is then pumped out to the surface of the property via a sump pump.

Why is water coming out of my basement drain?

There are several common reasons for water seeping up through your basement floor, including backed up or collapsed drains, leaking pipes or appliances, a cracked foundation, clogged gutters, and poor drainage.

How do you install a floor drain in a basement?

How to Install a Floor Drain in a Concrete Slab

  1. Prepare Your Space. While it’s easiest to install a floor drain prior to pouring your cement, you can do it after the floor has been set. …
  2. Plan Drainage. …
  3. Dig Trenches. …
  4. Pour New Concrete. …
  5. Add a Drain Cover.


What are the pipes in my unfinished basement?





The small one in the top left coming out of the floor is likely for a shower or tub. The larger diameter pipe coming out of the floor is almost certainly for a toilet. The smaller pipe to the right of the toilet that continues up is for the lavatory (i.e. sink).

What is the hole in the basement called?

The sump pit (also known as sump, sump basin, or sump well) is a water collection hole in the floor of your basement or crawlspace. It is very common for homes in areas that get regular rain-fall or have high water tables.

What are French drains in basement?

A French drain (also called a weeping tile, drain tile, perimeter drain or sub-surface drain) is a common basement waterproofing solution. It’s a trench containing a perforated pipe that redirects surface water and groundwater away from the foundation.

What is a floor drain called?

Perimeter drains are dug or cut into the basement or ground floor that has water leaking into them. These drains run along the walls and channel the water to the sump pump for pumping out of the house. Interior perimeter drains can be added to any ground floor and the sump pump is affected in moving the water.

Do all basements have a floor drain?



It is rare for a home not to have a floor drain in the basement, even if the floor has a finished carpet or hardwood surface. Floor drains are essential to the upkeep of a home, providing an outlet for unwanted wastewater, leaks from appliances and preventing flooding.

Do basement floor drains have traps?

The floor drain is considered a sanitary fixture. That means it functions just like a toilet or sink or shower. It has a trap inside of it just as those items do, and it holds water to seal away any foul odors trying to get into your basement.

How do you install drain pipe in concrete floor?

Quote from the video:
Quote from Youtube video: And if you'll cut through your concrete normally it's only about two and a half to three inches thick. Once you've cut in you're going to be surprised how easy it is to take it.

Is basement floor drain connected to sanitary sewer?



What most people don’t know is that their home basement floor drains are usually directly tied to the sewer system of the whole house. In some houses, they even run directly into a sump pit from which the water is lifted to the exterior surface with a pump.

How do I find plumbing pipes in basement?

Quote from the video:
Quote from Youtube video: Here we have what's called CPVC. It's a plastic pipe. And this is also used for your fresh water not used for waste at all then you have these right here these are both PEX.

What is a roughed in basement?

In a general sense, rough-in refers to the stage of construction after the basic framing is complete and the initial services (such as wiring or pipes) have been installed, but their end-points (such as outlets or fixtures) have not been installed.

How do I know if I have a drain tile system?

Signs of a plugged drain tile system include water entering the basement or crawl space, lush grass growth, puddles, or a sinkhole forming along the line of piping.

How do you unclog a foundation drain pipe?



Quote from the video:
Quote from Youtube video: Remember this is a perforated pipe surrounded by gravel and it's supposed to pick up the water as it pools along the foundation. And then carry it away we find the pipe.

What Is drain tile pipe?

Drain tile is essentially a network of porous pipes that run alongside your foundation. These pipes are in place to encourage water to drain away from the foundation and into the network of pipes, instead of seeping through cracks and causing issues in your basement itself.

What is weeping tile for basement?

Weeping tiles, also known as drain tiles, are a type of pipe system used to collect and discharge underground water safely away from your foundation. Originally named when similar systems were designed with terracotta tiles, modern drain systems use plastic.

Does weeping tile have holes in it?

The name is a callback to when terracotta tiles and pipes were used for drainage. Still, the modern weeping tile consists of a plastic or PVC pipe with tiny holes poked throughout one side. A weeping tile is also called a perimeter drain (because it’s located around the home’s perimeter) or a French drain.

How do you know if weeping tile is clogged?



How Can I Tell If There’s A Clog In My Weeping Tile System? One of the most obvious signs of a clog is soggy soil around your home. If your tile isn’t working, it can’t drain the water away, turning the ground very soft with pooling water.