What size thread is a fridge water line?
The tubing should have a diameter of 1/4-inch and can be copper line, braided steel line or plastic tubing. Many professionals prefer copper line, but plastic tubing is commonly sold as part of ice maker installation kits.
How do you put a compression fitting on a refrigerator water line?
Quote from the video:
Quote from Youtube video: Wrench. Remember to orientate the ferrule in the right direction tapirs side towards the like you see here. So insert the tube into the valve.
What size is Frigidaire water line?
White Dispenser Water Tube. This 5/16″ tube runs from the dispenser and connects to a green 5/16″ tube on the back of the refrigerator.
What thread is ice maker hose?
Product Description. Pack of two 3/8” Male Thread x 1/4” compression adapter Use it to connect the ice maker water line to your refrigerator or to connect a humidifier.
What size are refrigerator valves?
For a standard kitchen sink shutoff valve, you need a 3/8-by-3/8-by-1/4-inch Add-A-Tee. You also need a 1/4-inch flex water supply tube that is long enough to run from the Add-A-Tee to the refrigerator, plus several feet so you can pull out the fridge without yanking on the water line.
What size is the water connection on a Samsung refrigerator?
1/4 inch
Water lines are typically sold in kits and are not included with the refrigerator. We recommend using a water line installation kit that uses 1/4 inch copper tubing, a 1/4 inch compression nut, and a ferrule.
Can I use brass compression fittings on plastic pipe?
Compression fittings are not recommended to be used with steel tube. When using compression fittings with any type of plastic tubing, a brass insert must be used for further support.
What is a ferrule nut?
Quote from the video:
Quote from Youtube video: Video series Ferrell's a ferrule is the smallest part of a fitting. While the nut provides the driving force for compression. It's the ferrule that compresses.
How do you install a ferrule and compression nut?
Quote from the video:
Quote from Youtube video: Slide the compression fitting onto the tube until the tube bottoms out a drop of lubricating oil or thread sealant will ease not assembly thread the nut onto the fitting hand-tighten.
Are all refrigerator water lines the same?
While water supply lines to refrigerators can be made of different materials like copper, plastic types and braided stainless steel, the good news is with adapters, most ice-maker supply lines should be able to connect to most refrigerators.
What size is LG refrigerator water line?
5/16 of an inch
It is a long plastic tube, which is 5/16 of an inch in diameter. If your refrigerator is leaking, or if it will not dispense water or ice, you may have a damaged water line.
Is copper or plastic better for fridge water line?
Copper tubing is a great, affordable choice. Copper is durable, and you won’t get a bad taste in your water or ice (as reported when using plastic or PVC tubing). The only problem I see with using copper is that it can kink easily.
How do you connect copper water line to refrigerator?
Quote from the video:
Quote from Youtube video: Over the end of the tubing and then kind of adjust it. So it's just below the sleeve and this when it's tightened on to the male thread it will actually clamp the sleeve over the tubing.
Is ice maker line same as water line?
The ice maker supply line is a small plastic, copper, or stainless steel water line that feeds directly into the ice maker. Water pipes are very susceptible to damage it is important that while installing or once it has been installed it is in a position where it is not being bent or shaped in an awkward position.
How do you splice a refrigerator water line?
Quote from the video:
Quote from Youtube video: It comes in a little plastic container like this quick connect it says coupling okay and this is quarter-inch. And this is quarter-inch OD meaning outside diameter.
How do you replace the water inlet valve on a refrigerator?
Quote from the video:
Quote from Youtube video: Place a towel under the water valve assembly to catch water loosen. The compression nut and pull the water line free remove the screws from the rear compartment cover and pull the cover off remove.
How do you fix a leaky refrigerator water line?
Quote from the video:
Quote from Youtube video: Using a box cutter or pair of scissors. Cut a straight half inch piece off of the tube. And reconnect ensuring that the tube is firmly pressed into place reattach the grill base.
