What are the different types of JST connectors?
Contents
- ZH (1.5mm pitch)
- PH (2.0mm pitch)
- XH (2.5mm pitch)
- PA/XA (2.0mm / 2.5mm pitch)
- EH (2.5mm pitch)
- SM (2.5mm pitch)
- RCY (2.5mm pitch)
- SH/SR (1.0mm pitch)
How do I identify a Molex connector?
The Molex connector is one where the male/female terminology is a bit odd. The female connector is usually found on the end of a cable, and it slips inside of a plastic shell which surrounds the male pins on the male connector.
What are JST connectors used for?
JST connectors are used in many types of products, and commonly used by electronics hobbyists and consumer products for rechargeable battery packs, battery balancers, battery eliminator circuits, 3D printers, and radio controlled servos.
How do I know what JST connector I have?
JST connectors are mostly identified by the length between one contanct to the centre of another contact. There are always between two to higher contacts in a single line. Some families have multiple rows as well. This length is the pitch of the connector type and determines the family that the connector is a part off.
How do I connect JST connectors?
Quote from the video:
Quote from Youtube video: Hold the jst connection in your left hand and put it into the 1.6 millimeter slot with the inner wings. And just hold it with the pliers. Then stick in the wire.
What is a JST XH connector?
The JST XH series’ disconnectable, 2.5 mm (0.984”) pitch, crimp-style connector was developed based on the high reliability and versatility of their NH series connectors. The connector is very small with a mounting height of 9.8 mm. These wire-to-board connectors are typically used to bring power to a PC board.
What are the 3 types of connectors?
By Michael Pecht and San Kyeong electrical connectors
Electrical connectors are classified into three types based on their termination ends: board-to-board connectors, cable/wire-to-cable/wire connectors, and cable/wire-to-board connectors.
What are the 4 types of connectors?
Connectors are classified into various types based on function, level, and type of termination.
Classification of Connectors Based on Connector Function:
- Terminal Block.
- Binding Post.
- Plug and socket.
- Rack and Panel.
- Blade.
- Ring and Spade.
What is a plug called?
This type of connector is also known as a plug. A male connector can be recognized by the fact that, when it is disconnected or removed, the unshielded electrical prongs are plainly visible. The most common male connector is a two- or three-prong plug attached to the end of the cord for an electrical appliance.
How do you use JST XH connectors?
Quote from the video:
Quote from Youtube video: And you take it and set it in your connector. And your Corporon your connector in your crimper. And you just squeeze it down till it holds it don't squeeze it all the way.
Why are connectors called male and female?
The assignment is a direct analogy with genitalia and sexual intercourse, the part bearing one or more protrusions or which fits inside the other being designated male, in contrast to the part containing the corresponding indentations, or fitting outside the other, being designated female.
Do JST connectors lock?
Mfg. Co., Ltd. This connector has the secure locking structure by realizing space saving. It prevents to come off the housing when handling the wire and giving vibration.
What does a JST connector look like?
JST connectors are mostly identified by the length between one contanct to the centre of another contact. There are always between two to higher contacts in a single line. Some families have multiple rows as well. This length is the pitch of the connector type and determines the family that the connector is a part off.
What is a JR connector?
This JR connector has a 0.1″ pin spacing and is commonly used on RC servos. Two corners are slightly beveled, which makes it difficult (but not impossible) to incorrectly plug the connector into the corresponding male JR connector. This connector is also compatible with male Futaba J connectors.
What is a sm connector?
The SM series are 2.5mm pitch, wire-to-wire connectors that perform reliably in high-density, small current applications.
What is an IPEX connector?
IPEX female connectors are surface-mounted and soldered directly to the printed circuit board with 50 ohm impedance. IPEX cable assemblies can transmit single to connect GSM modular and GSM antennas, GPS modular and GPS antenna, WLAN modular and WLAN antenna.
What is connector pitch?
The pitch of a connector is the distance measured from the center of one pin to the center of the next pin. It is very important to know the pitch of a connector because otherwise it will not be compatible with the cable or wire you are trying to connect.
What is SMA K connector?
Description. The K connector is a precision miniature 2.92mm air-interface connector that operates mode free to 40 GHz. It has a mechanically compatible interface that mates with SMA and 3.5mm (APC3. 5) connectors see Figure 1.
WHAT IS AN type connector?
The N connector (also, type-N connector) is a threaded, weatherproof, medium-size RF connector used to join coaxial cables. It was one of the first connectors capable of carrying microwave-frequency signals, and was invented in the 1940s by Paul Neill of Bell Labs, after whom the connector is named. Type N.
What is a SMP connector?
The SMP interface is a subminiature interface in the same scale as MMCX connectors but offers a frequency range of DC to 40 GHz. It is commonly used in miniaturized high frequency coaxial modules and is offered in both push-on and snap-on mating styles.
