A frost-free faucet has a long stem and turns off the water well inside the wall, keeping the faucet from freezing. A properly installed frost-free faucet will have a slight downward pitch which allows water to drain out when the faucet is shut off.
How do I identify my frost free faucet brand?
- Find the Logo. The most obvious and quickest solution is to look for a logo — the manufacturer’s symbol — that identifies its faucets. …
- Locate the Model Number. …
- Count the Splines. …
- Broach Gauge. …
- Replacement Parts.
- The model number is printed on a tag that is attached to the cold water supply line of the faucet.
- The supply line is located below the sink, countertop, bath rim, or behind the bowl of a bidet.
- The model number, or part number, is typically preceded by “P/N.”
How do I identify a Sillcock?
It is identifiable by the vacuum breaker located on top of the faucet behind the handle. The arrow is pointing to the vacuum breaker. The models are identified by the country on their handles or by counting the threads on the physical inside stem assembly.
What does a frost free outdoor faucet look like?
On the outside, a frost-free faucet looks the like a conventional faucet, however the parts inside the house are different. On a frost-free model, the pipe that goes inside your home is longer than a traditional faucet, with the shutoff valve sitting additional inside your home where it’s warmer.
What makes an outdoor faucet frost free?
A standard exterior faucet features a washer just under the valve, which serves as the shut-off point for the water. When you turn the faucet off, pressurized water remains in the lower part of the faucet and the connecting pipe, where it can easily freeze, causing the fitting to break.
How do I identify my faucet manufacturer?
Quote from the video:
Quote from Youtube video: Another quick tip is to look underneath the sink because sometimes you might be able to find a label that's attached to a supply line that will tell you the manufacturer.
Where do I find my faucet model number?
Identifying Your Faucet Model
How do you measure a frost free Sillcock?
Measure back 4-5 inches from the rim joist inside your house. Make a mark with a sharpie. If your mark is close to a copper fitting, like an elbow or T, make it 2 inches away from the fitting. This will allow you to push a SharkBite fitting onto your copper pipe inside the house.
How do you fix Frost Proof Sillcock?
Quote from the video:
Quote from Youtube video: Off I'm going to take off the center screw. Then remove the handle. And then underneath this nut is a washer and a lot of times the problems in this washer.
What is Sillcock length?
Unlike a traditional hose bib where the valve stem is an inch or two in length, the valve stem for a sillcock is 6 to 30 inches long. Thus, the valve is well within the exterior wall and protected from the cold and freezing.
Are frost-free faucets worth it?
If you live in an area with cold winters and freezing temperatures (e.g., St. Louis), frost-free is the way to go. A frost-free hose bib is low-maintenance and gives better protection against faucet leaks, burst pipes, and water damage.
Are there outdoor faucets that don’t freeze?
A freeze-proof outdoor faucet, also known as a frost-proof outdoor faucet, is the answer. It’s basically a compression-style spigot with an extra-long barrel. It’s designed for installation on the side of the house. You should also replace each of your garden spigots with a freeze-proof yard hydrant.
How do I find the shut off valve for outdoor faucet?
Quote from the video:
Quote from Youtube video: In warmer climates the shut-off valve is likely just outside the house and near an outside faucet in newer homes you'll find a valve that looks like this to turn off the water.
How do I turn the water off outside?
Your home’s outdoor water shut-off valve is usually located near the ceiling, on the inside of the wall where the outdoor faucet is located. If the outdoor shut-off valve is tap- or knob-style, turn it clockwise, or to the right, to shut it off (remember: righty-tighty, lefty-loosey).
How do you turn off the outside water supply?
Quote from the video:
Quote from Youtube video: So you want to take the shutoff valve and if it's like this you want to turn it clockwise.
Can’t find my main water shut off valve?
Just past the meter should be the main water shut-off valve, a red or green handle or knob. If you don’t find the main water shut-off valve inside the house, check outside near an external faucet. This location is most common in warmer climates where frozen pipes aren’t a concern.
Where is the water shut off usually located?
Crawl-space with no basement – the shut-off valve typically is located near the water heater or under the kitchen sink, but anywhere is possible. If it is located inside the crawl space, you may want to consider a second valve located in the living space, for example, near the water heater or under a sink.
Who is responsible for water line from street to house?
In most cases, it’s your responsibility to maintain the supply pipe. This is the section of the service pipe from the boundary of your property – usually where the water meter and stop valve are – into the property itself.
How do I turn off the main water supply to the street?
Quote from the video:
Quote from Youtube video: The water valve is going to be in between the meter face and the curb usually when you've uncovered it it will have an arrow on the top showing the direction of flow. And. It will have two rings.
