The 4-way either sends them through straight, or exchanges them. So take 1 traveler off a brass screw, 1 traveler off a black screw, then splice them together to each other. Repeat with the other traveler. And done.
Can you replace a 4 way switch with a 3 way switch?
The two traveling wires can be swapped either way with no bad effect. If you want to abandon the other 3-way, you cannot remove or cover the box. You must remove the switch, rewire the circuitry, and install an approved cover plate.
How do you remove a 4 way switch?
Quote from Youtube video: We then run a brown cable from l1 or switch one over to l4 of switch two. We then run a brown cable from l2 of switch two over to l2 or switch three.
Can you wire a 4 way switch as a 3 way?
A 4way switch will not work in place of a 3way. The common toggle (in), whether up or down on a 3way switch, comes in contact with both switch leg (out) terminals. A 4way switch will not accomplish this. The 4way is more like two “separate” single gang switches, they will not work in unison as one.
Are 3 way and 4 way switches the same?
A four-way switch is similar to a three-way, except it has four terminals (plus a ground terminal) and controls one fixture from three locations. This type of switch must be combined between two three-way switches to form a circuit. While more uncommon, this is a good option for large rooms with several entrances.
Why would you use a 4 way switch?
Four-way switches are used to control lighting from three or more locations. Four-way switches are used in combination with 3-way switches. There are four terminals that provide two sets of toggle positions on a 4-way switch. Each set of terminals is one of the toggle positions.
How many switches can be on a 3 way?
two switches
3-way switches are used to control lights with two switches.
How do you wire up a 2 Way 4-way switch?
Quote from the video:
Quote from Youtube video: So we can actually make two separate cables that will feed down into box number two. Oh. That's nice that will pass inspection.
How can you tell which wire is common on a 4-way switch?
Quote from the video:
Quote from Youtube video: This group of wires goes to the upstairs switch in this group that's connected to the switch still goes downstairs. As you can see that's the hot set of wires this is just a little voltage tester.
Can I use a 3-way dimmer on a 4-way circuit?
Anyway, in a 4-way circuit (or more-way), you can replace either 3-way on/off switch (which will either be the first or last switch) with a 3-way dimmer. But it must be a 3-way dimmer, not a basic dimmer.
Can I put a dimmer on a light with 4 switches?
While no 4-way dimmer exists, there are 3-way dimmers that you could replace one of your two 3-way switches with. You can only have one, the other switch plus the one or more 4-way switches in the middle must be toggle switches.
Can I put a dimmer on a light with 3 switches?
Dimmer switches can be installed on a three-way switch. This allows two controls to turn the light on and off, with a third switch left for the dimming function. Three-way switches can be used with single-pole applications when installing a dimmer switch.
Can you have 2 dimmers on a 4-way switch?
You cannot use dimmers in two different locations to control the same light. But you can achieve a similar result with a master and slave switch. You can use one master control and multiple slave switches scattered throughout the house.
Can one dimmer switch control 2 lights?
With a standard single-pole dimmer, a single switch controls the light. With a three-way dimmer, you can control a light with two switches. You will need a three-way dimmer and a three-way switch.
Can you have 2 dimmers on the same circuit?
Yes you can have multiple dimmer switches on one circuit.
Can you have 2 dimmer switches on same light?
You can only have one dimmer per group. You can put the dimmer at either location, but not both locations. There are “companion” dimmers available from some companies, that allow you to place additional dimmers in the circuit.
What is a companion dimmer switch?
The Maestro companion dimmer switch is designed to compliment a Maestro switch or a 6A or 8A Maestro wireless multi-location switch. The easy-to-operate tap switch turns lights on and off to your favorite light level or tap twice for full on. Press, hold and release the switch for delayed fade-to-off.
Do dimmer switches require special wiring?
New dimmers have either a green grounding wire or a green ground screw that you’ll have to connect to a grounding source if one is available. Houses wired with plastic-sheathed cable almost always have bare copper ground wires that you’ll connect to the toggle dimmer switch.
