Can I resurface the concrete around my pool?

Concrete pool deck resurfacing can spice up your old pool deck without the hassle of tearing out the old concrete and pouring new. Pool deck resurfacing is a process that either repairs damaged concrete surfaces or updates their look.

How much does it cost to resurface concrete around a pool?

How much does it cost to resurface a concrete pool? It can cost $10,000–$20,000 to resurface the interior finish of a concrete pool, which usually includes replacing the waterline tile at the same time.

How do you fix crumbling concrete around a pool?


  1. Chisel out the crack to remove loose pieces of concrete.
  2. Clean the debris, including all dust and chips with a broom, shop vac or air compressor.
  3. Apply filler directly into cracks, checking periodically to see if it has settled.
  4. Allow the filler to cure over a 24-hour period.

Can I paint the concrete around my pool?

First off, nearly all of In The Swim’s pool deck paint and coatings can be used on concrete and wood, but if you have a concrete pool deck, it’s good to start off by locating any cracks or fissures. Hairline cracks don’t pose much of a problem and our pool deck coatings will fill them in fine.

How can I make my concrete pool deck look better?

How to resurface a pool deck (installation)

  1. Prepare & Repair. Etch, grind, or shot blast the concrete surface to make it porous. …
  2. Clean & Prime. Pressure wash and let surface thoroughly dry. …
  3. Mix Product. Following instructions, mix the product to prepare it for application. …
  4. Apply overlay. …
  5. Cure & Seal.

How do you smooth a rough concrete pool deck?

Fortunately, you can smooth out even the roughest concrete with a bit of labor and the proper equipment.

  1. Mix up a cup or two of sealant with an anti-skid additive, using a wooden stirring stick. …
  2. Apply the sealant to the concrete in a small, unobtrusive test area, using the paintbrush.

Can old concrete be resurfaced?

Concrete resurfacing is a way to make old concrete look new again. A concrete coating is applied over the existing surface, offering a variety of color, texture and pattern options. This type of decorative refinishing can be done on driveways, patios, pool decks and even indoor floors.

Can you tile over concrete pool deck?

Tile is one of the quickest and easiest materials to install. It can be set in concrete or with traditional grout. Many tiles are even self-adhesive. They can be stuck onto practically any type of existing surface including concrete, wood or even bare ground.

Can you epoxy a pool deck?

Epoxy coatings are available to give every pool deck a high-quality appearance and work to protect against potential damage.

What is the best paint to use on a concrete pool deck?

Epoxy is one of the best options for pool deck resurfacing. They form a hard, water-resistant, and chemical-resistant finish that lasts for years. You can use it on various pool surfaces such as concrete and fiberglass. Being a solvent-based pool paint, it creates a unified and finished surface.

Can a concrete pool deck be painted?

In fact, the application of concrete pool deck paint will only be effective if the surface is completely solid, already bonded, and in great condition. Also, the following pool deck surfaces should not be painted under any circumstance, no matter the condition; acrylic, cool deck, or kool deck.

How much does it cost to paint a concrete pool deck?

It costs around $1-$1.60 per square foot to paint a pool deck. This includes all materials necessary to complete the job, including surface cleaner (for prep), cool deck coating, paint (to tint and activate the COOL! bucket), and clear sealer.

How do you paint a concrete pool deck?

How to paint a concrete pool deck

  1. Fill cracks. This will help your pool deck look better and ensure the paint lasts longer.
  2. Clean the pool deck. Use a concrete cleaner, scrub brush and power washer to thoroughly clean your pool deck. …
  3. Let the concrete dry. …
  4. Apply the paint. …
  5. Seal if needed.

Is painting concrete a good idea?

Advantages to Painting Concrete

Concrete paints and stains help to mask surface discoloration and signs of wear and tear and they extend the life of concrete by preventing further damage. Coating a concrete surface with paint can also make for easier cleaning and maintenance.

Is paint or stain better for concrete?

For the ultimate in long-lasting, durable color, choose concrete stain. Because concrete stain doesn’t just sit on the surface of the concrete, but actually penetrates into the pores of the concrete to some degree, your color is not going to peel, chip, or flake.

Which is better epoxy or stain concrete?

Both stained concrete and Nature Stone flooring will last for years with proper care, but stone epoxy tends to be slightly more durable than stained concrete. The reason for this is because the sealant used on top of stained concrete wears down faster than stone epoxy.

How can I color my existing concrete patio?

Scrub the concrete using a stiff broom to clean dirt off the surface. Then rinse the entire patio with water. This how to stain concrete project is much faster and easier if you stain your whole patio a single color. All you have to do is wet the concrete and apply the stain.

How long does stained concrete last outside?

Few materials have the longevity of concrete. And because stains permeate the concrete to infuse it with permanent color, a stained concrete floor or pavement should last a lifetime when properly maintained (see How to Protect and Maintain Stained Concrete .

Can old concrete be stained?

The answer is: yes, you can acid stain old concrete. The process for acid staining old concrete is not all that different from staining new concrete with a few exceptions.

What is the average cost to stain concrete?

The exact price depends on your location, the condition of the surface, and the complexity of the design. Typically, staining concrete costs between $7 and $15 per square foot. Contractors charge between $2 and $4 per square foot for a simple stain job and between $12 and $25 per square foot for a high-end design.