What is the fastest way to dig a fence post hole?
There’s no question about it — the fastest and easiest way to dig post holes is to use a gas-powered earth auger. Fill the tank with gas, position the auger on the ground, fire it up, hold on tight and watch the soil come streaming out of the hole.
How do you make post holes dig easier?
Quote from the video:
Quote from Youtube video: Mix up some epoxy slathered on the handle. And stick it into the blade hosel tap the handle on the floor to drive it home and then drill a quarter inch hole through the new handle slip.
How do you dig a post hole without a post hole digger?
How to Dig a Hole: Pro Tips
- Step 1: String your line and pound the stakes. …
- Step 2: Carve out a soil divot with a spade. …
- Step 3: Loosen earth with a tile shovel. …
- Step 4: Use your clamshell digger. …
- Step 5: Use a reciprocating saw on large roots. …
- Step 6: Dislodge rocks with a digging bar. …
- Step 7: Tamp the soil with the other end.
How do you line up a corner post?
Quote from the video:
Quote from Youtube video: Your string line should always extend past your actual fence line on corners and ends at this location in the layout.
What is the best tool for digging post holes?
You can use a post hole digger or power auger to dig the hole. A post hole digger is a manual tool and will get the job done in average soil. If you have hard, rocky soil or a lot of roots – you may want to opt for a power auger.
How do you dig a deep hole by hand?
Quote from the video:
Quote from Youtube video: And you just pick the way out it and knock it down in there but then you still got to come back to the shovel and move the dirt either out of the hole into a wheelbarrow whatever paving the bucket.
How do you dig a fence post hole in hard ground?
Quote from the video:
Quote from Youtube video: And sand. And so anytime we try and dig a hole. We're just going to end up with a great big crater. We can shovel as much as we want but eventually. And it eventually will stop but we'll end up with
How long does it take to dig a 6 foot hole by hand?
This means it takes 4.24 minutes to dig a 6 foot deep hole of 16 inches diameter.
Do manual post hole diggers work?
For most people, the choice comes down to the type of soil they have to dig. Loose soil can usually be handled easily with a manual post hole digger. This will save you the cost of hiring and fuelling a power tool, especially if you don’t have many holes to dig.
Should I use an auger or post hole digger?
Post hole diggers focus on one task – they dig holes for posts, whereas a hole auger is suited for a wide variety of tasks around the garden. Post hole diggers rely on more work than a hole auger, these heavy hand tools are basically thrown hard into the soil with force then lifted out.
What is the difference between an auger and a post hole digger?
Q: What is the difference between an auger and a post hole digger? The difference between the two is in how they dig holes. You thrust a traditional post hole digger into the ground and remove the soil between the scoops. An auger “screws” into the ground and transports dirt along the blade up to the surface.
Can you dig post hole with shovel?
With the turf removed, a long-handled shovel does a good job of removing the dirt. Dig with the blade plumb and the handle pushed forward to keep the walls of the hole straight up and down.
What is the fastest way to dig a hole in a shovel?
Quote from the video:
Quote from Youtube video: And does a really good job the second kind of shovel is the square nose and this is really good for shaping the bottom smoothing kind of works like a like a wood plane.
How do you dig a hole in a compacted soil?
Quote from the video:
Quote from Youtube video: You can slide your hand down then as you go back up slide it back towards your hand that's the easiest way to go about. This. So we're just breaking it up right. Now.
How long does it take to dig a fence post hole?
40″ in depth, 12″ diameter, using a tamping bar and a post hole digger. To my surprise it took around 20 minutes per hole. I’ve never dug holes before so was a bit surprised by this based on how averse everyone is to using manual tools for such tasks. I expected each hole to take upwards of 2 hours.
Is 2 feet deep enough for fence posts?
The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).
Do fence posts need cement?
No, fence posts don’t need to be set in concrete, and there are plenty of other ways to fix your posts if this feels a bit too permanent. If you are using wooden posts, concrete may actually be the worst option.
