Can a dimmer switch be replaced with a regular switch?

You can replace the dimmer switch with a regular light switch, only from what you have described you need to install a 3-way light switch, not a single pole light switch. The typical connections are as follows: The black wire to the lone screw on the 3-way light switch.

How do I rewire a dimmer switch to a regular switch?

Quote from the video:
Quote from Youtube video: We want to make sure that the wires attached properly to the switch on each wires end make a clockwise turn which is the same direction as we will tighten the wires to the switch.

How do you bypass a light dimmer switch?

To bypass a dimmer switch, you will need to remove the switch from the wall and reconnect the electrical wires in the original circuit configuration.

How do you wire a dimmer switch to a single pole switch?

Quote from the video:
Quote from Youtube video: This dimmer we need to connect the hot wire from the service panel to the black wire. And the hot wire going up to the light to the red wire.

Is a dimmer switch wired the same as a normal switch?

Replacing a standard single-pole or three-way switch with a dimmer switch is no different than replacing a standard switch. Remember: Dimmer switches don’t work on most fluorescent fixtures, and low-voltage lighting requires special low-voltage dimmers.

What is the red wire on a dimmer switch?

Red is the switched lead (or a traveler in a 3-way installation), and is attached to the switched hot going to the light. Red with white is a traveler, used for 3-way installations. In your situation, you’ll just cap this one off. Green is ground, and is attached to the grounding conductor.

Does it matter which wire goes where on a light switch?

In the case of a single-pole switch, these wires are interchangeable—it doesn’t make any difference which wire is attached to which screw terminal. Inside the switch is a metal pathway that closes when the switch is in the ON position and opens to interrupt the flow of power when the switch is turned OFF.

What does single pole mean on a dimmer switch?

With a standard single-pole dimmer, a single switch controls the light. With a three-way dimmer, you can control a light with two switches. You will need a three-way dimmer and a three-way switch. This lets you dim from one location and turn the lights on and off from another.

Why are there two black wires on a dimmer switch?

STEP 3: Identify the terminal and ground wires.

Observe the layout of the wires. You should see two black wires, each connecting to a different screw on the side of the switch. These are called terminal screws. You will also see two white (neutral) wires that connect to one another in the box.

Why does dimmer switch have 2 black wires?

The two black wires connecting to the black leading to the switch are supplying power to the switch/dimmer. The blue wire from the switch connected to the other black wire is the switched-hot going to the light. The green wire is the ground.

Can you use a single pole on a 3-way switch?

Yes it can work. 3-way switches are spdt (single pole double throw) with 3 screw terminals, and regular switches are spst (single pole single throw) with 2 screw terminals.

How do you turn a 3 way switch into a single?

Quote from the video:
Quote from Youtube video: Done long as we wired everything right they should work now the way to test a three-way is not just turn the switch off. From here and then back on from there.

How do you wire a 3 way dimmer switch to a single pole?

Quote from the video:
Quote from Youtube video: And placing it in a wire nut with the green wire coming off of our dimmer. You'll then take one of the wires from the existing switch and placing it under the copper screw terminal on the dimmer.

How do you wire a single pole switch with 3 wires?

Quote from the video:
Quote from Youtube video: Source hot wire connected to the neutral wire of the light switch. That we labeled with a black electrical tape to make sure that that is now hot.

Why does a dimmer switch have 3 wires?

A 3-wire NM connects the travelers of the dimmer to the travelers of the 3-way switch. Traveler wires are interchangeable on each switch. The 3-way dimmer and 3-way switch are also interchangeable. The common terminal of the 3-way switch connects to the light fixture(s).

What is the difference between single-pole and 3-way?

The most common household switch, a single-pole, has two terminals and simply turns power on or off. A three-way switch has three terminals; a four-way has four.