https://youtu.be/V6rTe0ljvPE
How do you attach a deck to the side of a house?
Quote from the video:
Quote from Youtube video: One with the leg bolts all in place i'll just snug them. Up. Here's the second fastener that we're going to use and we're going to use it to fasten the ledger to the foundation.
Are decks supposed to be attached to the house?
Without any solid attachment a house, your deck will sway and wobble. It needs bracing, especially if it is high off the ground.
Should a deck be attached to the house or freestanding?
A freestanding deck is better than an attached deck in that water remains away from the house. With no ledger attached to the house, water will not become trapped against the house, possibly rotting the side of the house and deck. A freestanding deck gapped away from the house; water will freely flow off the deck.
How do I build a freestanding deck next to my house?
How to Build a Freestanding or Detached Deck
- Step 1: Layout & Prepare the Deck Site. …
- Step 2: Dig Concrete Footing Holes. …
- Step 3: Pour the Concrete Footings. …
- Step 4: Install the Posts. …
- Step 5: Build the Beam. …
- Step 6: Set the Beam. …
- Step 7: Install the Floor Joists. …
- Step 8: Lay the Deck Boards.
How much space should be between deck and house?
A proper connection would have a 1/2” to 3/4” gap between the deck construction and the house to allow rain and meltwater from snow to flush through; this prevents rot from forming in the deck timbers, and/or in the adjacent wood of the house framing.
Is a ledger board necessary?
A deck ledger board is needed to support one end of the deck joists with a deck beside a house. The ledger is fastened to your adjoining home, distributing half of the deck weight and live load (forces applied to the deck such as furniture, people, etc.
How do you build a deck attached to your house?
Quote from the video:
Quote from Youtube video: We nailed ours together with 10d by three inch long simpson strong tie nails the nails should be spaced. About six inches apart and staggered. One at the top and one at the bottom.
Is a floating deck a good idea?
A floating deck offers numerous advantages. In addition to not requiring a building permit, floating decks are far easier and faster to build than elevated decks. They also don’t require frost depth footings and don’t need handrails because they’re so close to the ground.
How do I build a floating deck next to my house?
Quote from the video:
Quote from Youtube video: Board you need to place at least two screws in a row. And place them out 18 inches apart i recommend pre-drilling the holes. First then attaching the screws.
Where do you dig footers for a deck?
Deck footings need to be dug below the frost line. Make sure the bottoms and sides of the holes are compact and solid before pouring your concrete. You can dig the footings 6″ deeper than the frost line.
Should I use 2×4 or 2×6 for deck?
Most builders stick to using a minimum of 2x6s for deck floor joists. If you want to add guardrails and stairs, you need at least 2x10s. 2×4 and 2×6 joists are ideal for ground-level decks without guards.
How close can a floating deck be to the house?
Quote from the video:
Quote from Youtube video: Похожие запросы
How do you build a deck attached to your house?
Quote from the video:
Quote from Youtube video: We nailed ours together with 10d by three inch long simpson strong tie nails the nails should be spaced. About six inches apart and staggered. One at the top and one at the bottom.
How do you attach decking to a wall?
Quote from the video:
Quote from Youtube video: This will stop water from becoming trapped between the house and the decking. You can then hand tighten the screws into the wall plugs. Before using a drill and drive a bit to secure. Them.
How do you attach a ledger board to a foundation?
Use a wood bit to drill ½” pilot holes through the ledger board. Next, use a concrete bit to drill into the concrete wall. Install two bolts at the end of each ledger board. Hammer the sleeve anchor through the ledger board into the concrete wall.
Can you put a ledger board over siding?
In order to install the ledger board, you usually need to remove the house’s siding. Never install a ledger board over the top of siding no matter what you hear, this can weaken the connection. Aluminum and vinyl siding can easily be removed with tin snips from an area one foot surrounding the ledger board location.
How far should deck boards be from siding?
Either use two stainless steel screws through the face of the board at each joist or ExoDek QuickClips to fasten the boards to the deck frame. The first board you install should be about 1/8″ (3.5mm) away from the siding, to account for drainage, expansion and contraction.
How many lag bolts do you put in a ledger board?
Approved Fasteners
The International Residential Code lists two fasteners for directly attaching ledgers to a house: 1/2-inch-diameter hot-dip-galvanized hex-head machine bolts and 1/2-inch-diameter hot-dip-galvanized lag screws.
Is flashing required on a deck?
“Flashing is required where exterior porches, decks, or stairs attach to a wall or floor assembly of wood frame construction.
What do you put under decking?
A layer of crushed gravel, with or without plastic or weed barrier cloth, is the best choice for using under a deck. It sheds moisture instead of absorbing it, keeps the area under the deck drier, and won’t decay.
What is a deck ledger?
The deck ledger is the deck floor rim board attached to the house, and it should be positively connected to the floor structure of the main building with bolts or lag screws, not nails. The main objective of this article is to alert property owners and code officials to decks with “nailed-only” deck ledger connections.
