How do you remove a water shut off valve under the sink?
Quote from the video:
Quote from Youtube video: Use a pair of channellock pliers to slowly move the valve in the clockwise direction. At least a half turn then carefully move it back in the counterclockwise.
How do you change a water shut off valve on a kitchen sink?
Quote from the video:
Quote from Youtube video: So come along let's get the fixes for this job we're going to be using this 1/2 inch by 3/8 by 3/8 compression tool stop it's quarter turn valves. It works really awesome. It's gonna allow us to shut
How do you replace a plastic shut off valve under a kitchen sink?
Quote from the video:
Quote from Youtube video: And you do a soft pulling motion as you're doing it. Again you want to be very careful because it is plastic piping coming out of the wall. Just be very gentle as you're pulling. It.
How do you remove a stubborn shut off valve?
If this doesn’t work and the shutoff valve remains fixed in place, try heating the valve with a hair dryer. Spray down the valve again with the penetrating oil, and then try again with the wrench. Doing this over and over again, you should be able to loosen your stuck valve.
How do you loosen a stuck PVC ball valve?
Spray the lubricant onto the valve where the valve handle enters the actual valve body and let it sit for about 20 minutes. Then, try loosening the valve by hand again. If it doesn’t move, or is still difficult to turn, tap it lightly with the hammer.
How do I remove a rusted water shut off valve?
Quote from the video:
Quote from Youtube video: To take this valve off you need to hold one wrench on the nut itself and another wrench on the valve. And turn them against each other until you get it to release. And then just unscrew.
What are the 3 valves under kitchen sink?
You may find 2 shut off valves (one each, for hot and cold water) or a three-stop valve for both water supply lines. The 3-way shutoff valve can also be shared between the kitchen sink hot water and the dishwasher. Under your kitchen sink, you should find a shutoff valve for the supply lines.
How do you remove a plumbing valve?
Loosen the compression nut by turning it counter-clockwise.
Ensure that the water supply is off before removing the valve. Affix a pipe wrench to the 6-sided nut that holds the valve body in place. Rotate it counter-clockwise to loosen it from the valve body. The compression nut is a ring that fits around the pipe.
Where is the shut off valve for the kitchen sink?
Look for the oval-shaped valve knob. Sink valves are typically located just under the sink, toward the rear and near the bottom of the cabinet. Washer shut-off valves are typically just behind or above the washer, with one each for hot and cold supply lines.
Which way do you unscrew a valve?
Quote from the video:
Quote from Youtube video: So when it's diagonal with the pipe that means your water is shut. Off. So you want to take it. And turn it clockwise to shut it off.
Can you spray wd40 on water shut off valve?
Stuck valve: If you simply can’t turn the valve, which happens often with fixture shut-offs and old-fashioned main shut-offs, you may need to spray the valve with WD-40 and give it time to lubricate before trying again.
How do you loosen a stuck water supply line?
Apply a penetrating lubricant such as Liquid Wrench or WD-40 to the fixture or nut and allow it to soak in for at least two hours. Apply more penetrating lubricant and allow it to soak in for another two hours. Turn the fixture or nut to loosen it.
How do you open a plastic water valve that is stuck?
Quote from the video:
Quote from Youtube video: Inside on the bushing. So you want to make sure that when you're trying to open it you grab the base of it that way you're not just twisting. And snap those water lines.
How do you unscrew a ball valve?
Quote from the video:
Quote from Youtube video: So here you have the body and the adapter you're gonna want to loosen the adapter usually you need a tool I've already loosened it. So once it's loosened you're going to unthread it from the body.
How do you remove a ball valve handle?
Quote from the video:
Quote from Youtube video: I can turn this like 1/4 or 1/8 of a turn clockwise. And then it pops right out you can see this is still wide open. And essentially what you do is you can buy a replacement handle.
How do you replace a ball valve?
Quote from the video:
Quote from Youtube video: To keep the whole float valve from moving I'm just gonna adjustable spanner on the nut and slowly remove. It right that's loosened out so I can remove it the rest of it by.
How do you change a main water shut off valve?
Quote from the video:
Quote from Youtube video: In this case we freeze. It. Then you cut it it's really scary when you do. And then you solder on a new valve as quickly as possible now this is using co2.
