Can a dimmer switch be used on multiple lights?
You will need a three-way dimmer and a three-way switch. This lets you dim from one location and turn the lights on and off from another. If only one switch controls the light, purchase a single-pole dimmer. If two switches control a single light or a group of lights, you will need a three-way dimmer.
Can you control two lights with one dimmer switch?
Yes, you can run two lights off the same dimmer switch.
How many lights can one dimmer switch control?
This means that if an incandescent dimmer is rated at 600W, you can’t assume you can use twenty-four 25W LED fixtures. A good rule of thumb is to allow 100W for each LED fixture so in this case, the 600W dimmer can handle only six LED fixtures.
How do you dim multiple lights?
Quote from the video:
Quote from Youtube video: And you go into devices. And there you can see all the different accessories. I've got set up and there's the lounge dimmer. So click onto that. And there's the dimmer.
Can I put a dimmer on a light with 4 switches?
While no 4-way dimmer exists, there are 3-way dimmers that you could replace one of your two 3-way switches with. You can only have one, the other switch plus the one or more 4-way switches in the middle must be toggle switches.
Can you dim lights from two locations?
If you are switching from two locations, you also need to use 3-way switches for both the plain switches and dimmers (many dimmers are 3-way compatible). There are specialized dimmers that work as master and slave units. These do allow dimming from multiple locations, but you need to use a set of matched units.
Can you put 2 dimmer switches side by side?
Dual dimmer switches can control two separate lights or a fan and light combination. A dimmer switch for a fan must conform to power load rating specified by the manufacturer. Lutron Electronics makes dual dimmer switches that fit inside a single box.
Can I put a dimmer on a light with 3 switches?
Dimmer switches can be installed on a three-way switch. This allows two controls to turn the light on and off, with a third switch left for the dimming function. Three-way switches can be used with single-pole applications when installing a dimmer switch.
What is a multi location dimmer switch?
Unlike 3-way dimmer switches, which cannot support multiple dimmers on the circuit, multi-location dimmer switches allow for dimming controls in more than one location. These can be paired with a compatible dimmer switch, non-dimming 3-way switches, or smart-home systems and remotes.
Do you need special wiring for a dimmer switch?
New dimmers have either a green grounding wire or a green ground screw that you’ll have to connect to a grounding source if one is available. Houses wired with plastic-sheathed cable almost always have bare copper ground wires that you’ll connect to the toggle dimmer switch.
Can you put two dimmers on a three way?
The answer is no. If you set up a 3-way switch for your light, there can’t be multiple dimmers. However, there are workarounds to this. Such as placing one dimmer on the line leading into the first switch.
Can the hue dimmer switch control multiple lights?
Through the Hue app, you can control a maximum of 10 lights within 2 rooms at a time using the Hue Dimmer Switch. This limitation is due to the way that the ZigBee protocol works. ZigBee sends one command at a time every tenth of a second, this means that to turn on/change 10 lights it would take one second.
How many bulbs can Hue dimmer control?
10 Philips Hue
Every Smart Dimmer Switch can be paired up with up to 10 Philips Hue bulbs.
How many lights can a smart switch control?
It can set routines, control up to 50 lights, and offers a much larger range.
Do you need Hue Bridge for dimmer switch?
As long as you want to control your lights using the Dimmer Switch, you don’t need a Hue Bridge hub at all.
Is Hue Bridge necessary?
However, the Hue Bridge is not required to use Philips Hue smart lighting. Most Philips Hue smart lights are Bluetooth-enabled (look for the symbol on the packaging) and can be controlled with the Philips Hue Bluetooth app without a Hue Bridge — but a Bluetooth setup does come with some limitations.
What is the difference between the Hue Bridge and hub?
The Biggest Difference Is the Bridge
The Hue Bridge is the Philips Hue hub, the central point that the Hue bulbs connect to. With the introduction of the 2nd-generation Hue Bridge, the device received an all-new design, as well as support for Apple’s HomeKit smarthome platform.
How do I pair my hue dimmer without a bridge?
Quote from the video:
Quote from Youtube video: Once you've connected on the phone you take your device. You turn off your plugs for your strip light turn them back on so they're in pairing mode you press and hold the 1 or the lobby on button and
