If the led lamps are dimmable and are working they will be fine. The normal problems with led’s is they draw so little current that many dimmers cause them to glow and or strobe, with 6 your load may be enough that you don’t see any problems like you may with only a single lamp on that dimmer.
What happens if you use a dimmer switch for LED lights?
Use an LED Dimmer switch
If you dim a standard bulb such as halogen and the light intensity is reduced to 50% via dimming then the halogen bulb will give almost no light output, however if you do the same with an LED bulb the LED light will give 50% of its light capacity at its fullest.
Do I need a special dimmer for LED lights?
Yes, LED lights require a special dimmer. An old fashioned incandescent dimmer switch will not work properly with LED bulbs. You cannot just simply lower the voltage to the LED driver.
Can you use LED light bulbs with dimmers?
Yes, LED bulbs can be used on a dimmer but they need to be listed as dimmable. LEDs can still work with incandescent dimmers, but the compatibility is an essential factor.
Why can’t you use LED bulbs with a dimmer switch?
Even dimmer-compatible LED bulbs typically can’t be dimmed as low as incandescent lights when they are paired with standard dimmer switches—they may dim the light down to about 30 percent of full illuminations, and they then turn off completely.
What happens if you put a non-dimmable LED in dimmer?
If you use non-dimmable lights in a dimmer circuit, they will either flicker or just run at full brightness. They will likely burn out faster, too.
Why do LED lights flicker on dimmer?
LED bulb flickering can be traced in almost every instance to a non-compatible dimmer switch in the lighting circuit. Modern dimmer switches create the dimming effect by switching the power supply on and off many times per second.
How do I choose an LED dimmer switch?
Choose a dimmer with a wattage rating that meets or exceeds the total wattage of all the light bulbs the dimmer will control. For example, if the dimmer controls a fixture with ten 75-watt bulbs, you need a dimmer rated for 750 watts or higher.
Can LED lights cause a fire?
LED lights are unlikely to start a fire. The bulbs don’t get hot enough to ignite anything. The biggest risks are faulty wiring or overloaded circuits. This is often caused by the way they are installed, rather than an issue with the light itself.
How do I know if my LED is dimmable?
#1 – If you bought a finished LED fixture or bulb, check to make sure the packaging specifically states that it is dimmable. This should be stated in the description or the technical specifications of the light.
Are dimmer switches safe?
So, although it is mostly safe to leave a dimmer on low, it is essential to ensure that the light bulb itself is not surrounded by something that can catch fire. Another aspect to keep in mind is that dimmer switches can be a fire hazard if you put too much load on the circuit.
What is the difference between dimmable and non-dimmable LED?
Dimmable LEDs, on the other hand, have special circuitry inside. This makes them able to respond to changing phase forms that produce the dimming effect. Non-dimmable LEDs are designed to either be fully powered ON or OFF. Its circuitry cannot handle special phase forms.
What is the difference between LED dimmer and incandescent dimmer?
Quote from the video:
Quote from Youtube video: The LED on the right. And starting to see on the left you're getting that orange glow whereas on the right. You're keeping more of a white light now both lamps are 2700 Kelvin.
What wattage LED dimmer switch do I need?
A rule of thumb commonly used to calculate a load for LED dimmers is to divide the stated maximum load by 10. For example a 400W dimmer switch should have no more than 40W of LED bulbs connected to it, which would equate to eight 5W bulbs.
What is an LED compatible dimmer?
Dimmer Switches work by reducing the power delivered to your light bulb. They do this by trimming a section of a waveform, either on the leading edge or trailing edge of the wave. Manufacturers have designed their LED light bulbs to be compatible with the majority of common ‘trailing edge’ household dimmers.
What are the two basic types of dimmers?
The two basic types of dimmers are based on how they are controlled: Mechanical and Electronic.
Are all LED dimmer switches the same?
While most LED bulbs are now dimmable, not all of them are and not all of them dim in the same manner Since LEDs consume such a low wattage, many types of dimmers do not function with LED in the same way that they do with high wattage load incandescents.
How do I know what type of dimmer switch I have?
If you already have light bulbs and are looking for a dimmer switch, find the product page for the bulbs and check the PDF for a list of compatible dimmers to choose from. The specific dimmer compatibility information will always be with the bulbs rather than with the dimmer.
