Can LED light bulbs be used with a dimmer switch?
A standard dimmer switch cannot be used with an LED light as you will never be able to dim the LED light either completely or not very well. LED lights need their own special electronic dimmer switch to have a fully functioning and dimming light.
Do I need a special dimmer for LED lights?
Yes, LED lights require a special dimmer. An old fashioned incandescent dimmer switch will not work properly with LED bulbs. You cannot just simply lower the voltage to the LED driver.
What happens if you put a non dimmable LED bulb in a dimmer?
Dimming LED lamps can save energy and changes the visual appearance and mood of your space. You can use a dimmable LED lamp in a non-dimmable circuit. You should NOT use a non-dimmable lamp in a dimmable circuit as it may cause damage to the lamp and or circuit.
Can any LED light be dimmed?
While most LED bulbs are now dimmable, not all of them are and not all of them dim in the same manner Since LEDs consume such a low wattage, many types of dimmers do not function with LED in the same way that they do with high wattage load incandescents.
How do I know if my LED bulbs are dimmable?
#1 – If you bought a finished LED fixture or bulb, check to make sure the packaging specifically states that it is dimmable. This should be stated in the description or the technical specifications of the light.
Do I need special bulbs for dimmer switches?
A modern dimmer switch switch functions the same way as if you turn a light ON and OFF really fast. These switches are designed to work with CFLs, Halogens, and Incandescent light bulbs. But the bulbs need to be of the latest technology and must have the feature of dimming to allow it to be used with a dimmer switch.
Is there a difference between a dimmer switch and a LED dimmer switch?
The main difference is that you have a smaller dimming range (typically 70-90% range vs. 100% with incandescent or halogen). LED Bulbs may not shut off at the lowest dim setting like traditional bulbs. This happens because the dimmer thinks the bulb is completely off due to the low amount of wattage the LED consumes.
What type of dimmer do I need for LED lights?
LED bulbs have a low wattage, so you’ll need to have a dimmer that is 250W or 400W and ideally intelligent trailing edge, for smooth dimming. See our full range of LED suitable trailing edge dimmer switches.
Why do my LED lights flicker on a dimmer switch?
There are many reasons why an LED lamp can flicker, but the most common cause is a lack of resistance in the lamp to allow the dimmer curve to work correctly. This is not a new issue; it’s been around for a long time, but is becoming more “noticeable” with the major increase in LED usage.
How do you install a LED dimmer switch?
Quote from the video:
Quote from Youtube video: We can put the new dimmer switch on now when you go to buy your switch make sure you're getting the switch that's right for your project. This is actually a single pole or a 3-way pole compatible.
Why are my dimmable lights not dimming?
One of the most apparent reasons for dimmer switches not being able to dim all the way is the lack of compatibility between the dimmer and bulb you have used. There are dimmable bulbs and non-dimmable bulbs; if you were to use a non-dimmable bulb with a dimmer switch, it wouldn’t work out at all.
How do you dim non-dimmable LED lights?
Simply, you can’t dim non-dimmable LED lights. If you use non-dimmable lights in a dimmer circuit, they will either flicker or just run at full brightness.
How do you make LED lights dimmable?
Simply connect the two output wires from the power supply to the dimmer unit, and then the two input wires from the LED strip. The dimmer simply acts like a valve, and the power supply unit will automatically provide the rated current and voltage to depending on the dimmer’s knob position.
What’s the difference between dimmable and non dimmable light bulbs?
Dimmable LEDs, on the other hand, have special circuitry inside. This makes them able to respond to changing phase forms that produce the dimming effect. Non-dimmable LEDs are designed to either be fully powered ON or OFF. Its circuitry cannot handle special phase forms.
