Can you sand floors without removing baseboards?
Installing hardwood floors without removing the baseboards is possible, and it’s a suitable option for other types of flooring as well. If your baseboards have been glued to the wall and would cause damage if you tried to remove them, it may be best to leave them.
Do you have to remove baseboards to replace wood flooring?
Quote from the video:
Quote from Youtube video: Hi this is Troy Hughes with Eastwood flooring. Today's topic is do I remove the baseboards prior to installation. The manufacturer requires us to leave an expansion joint for a solid wood floor or an
How do you fix a gap between baseboard and floor?
If the gap between your baseboard and tile floor is ¼-inch or smaller, it should be filled with caulk. If the gap is larger than this, it’s best to install shoe molding to hide the gap. When caulking gaps between your floor and tile, it’s essential to use a paintable caulk.
Do baseboards sit on top of hardwood?
Quote from the video:
Quote from Youtube video: If you go to some of these house needs and if you see the baseboard down on top of a wood floor. Usually the little piece of trim at the bottom.
Can you refinish hardwood without removing trim?
Let’s get started. As a general rule, we recommend leaving your base and shoe on when having your floors refinished, especially if it is painted. Depending on how the painters prepped your base, you can actually cause more damage to the base and walls by removing it.
What is the cheapest way to refinish hardwood floors?
Applying a revitalizer gloss is the simplest and cheapest way to refinish hardwood floors. This approach works best on floors that only have surface-level scratches and other minor wear and tear issues. You can get the job done without the need for equipment rentals or hard-to-find materials.
How do you install hardwood floor without removing baseboards?
Quote from the video:
Quote from Youtube video: End use the floor installation tool to pull the last piece into place and tap the overlapping. End until it is tight. And then your room is done remember how the walls are already painted.
How do I remove baseboards without damage?
Quote from the video:
Quote from Youtube video: Now grab a putty knife or a scraper knife. And lightly tap it in between the baseboard. And the wall. And i like to use my pry bar. And you may need to reuse your utility knife to ensure the silicone.
Should flooring go under trim?
Baseboards are often installed before flooring, although it depends on the type of flooring being used. It is necessary for carpeting to have the trim in place, allowing the edges to be tucked under and out of sight. However, for hardwood or laminate, it is easier to install the trim after.
How do you scribe baseboards for uneven floor?
Quote from the video:
Quote from Youtube video: And the scribing tool will copy any of the inconsistencies. That are in the floor. And they'll reflect in my pencil lines. And I can chance I can make sure that I'm still. Level.
Can you caulk between baseboard and hardwood floor?
Quote from the video:
Quote from Youtube video: Right you don't want a really tight caulk bead in this scenario. You want it to be a little bit larger and it'll be fine in the scheme of things you're never going to know the difference.
How high off the floor should baseboards be?
The term trim includes door casings, baseboards, and any molding that will come in contact with the floor. They should be kept 3/8″ to 1″ above the floor if installed before the carpet is laid or according to the manufacturer’s instructions.
How do I make my hardwood floors look new without refinishing?
To make hardwood floors look like new without refinishing:
- Try buffing and polishing with a commercial-grade buffer.
- Use a hardwood floor polishing sealant.
- Clean markers with toothpaste and a clean cloth.
- Apply a wood floor cleaner or oil soap for a high-gloss clean.
Should I remove quarter round before refinishing floors?
If you’re refinishing your floors, you’ll want to remove the quarter round trim to sand or strip off the old finish all the way to the edges. If done correctly, you can even replace the same trim once the floors are done!
Do the baseboards have to be removed to install vinyl flooring?
Don’t want to deal with removing baseboards? You can leave them in place, but you will need to leave a ¼” gap between the baseboard and flooring, to account for expansion over time. You may want to purchase some quarter-round pieces in a matching color to cover up this gap.
Does flooring go under baseboards?
Baseboards are usually installed before flooring with a reservation gap left at the bottom of the baseboards for the flooring to be slid underneath. The gap left under baseboards for flooring is dependent on the width of the flooring being installed.
Should I remove baseboards before installing LVP?
For ease of installation, it is always best to remove the trim that makes contact with the floor. This includes baseboards, base shoe moldings, and case moldings around doors.
How do you fix a gap between baseboard and laminate flooring?
Either way, it’s an easy fix. Latex caulk will seal off that gap and will expand and contract with the movement of the materials afterward. You can buy it in just about any color, so matching the floor is usually pretty simple.
How much space should be between hardwood floor and baseboard?
⅜ to ½ inch
For things like tile or hardwood, you would want to give a ⅜ to ½ inch clearance for the installers to be able to put the flooring in and be able to slide the edges beneath the baseboards. Tile can be sharp, and the edges can cut if they are not covered.
How do you fill in baseboard gaps?
Quote from the video:
Quote from Youtube video: Look so it's all about finessing. Take your time use light pressure on this part. And we're going to finish it off and make it look good with the six inch knife.
