The fascia board is the long wooden board behind the gutters on a house. It connects to the roof rafters, closes off the attic and serves as the mount for gutters.
What is the board called that the gutter is attached to?
fascia board
The fascia board is the one mounted at the point where the roof meets the outer walls of the house and is often called the ROOFLINE. However most people refer to it by the name of the main board that carries the gutter – the fascia or fascias.
What kind of board do you use for fascia?
Typically for fascia boards, cedar and redwood are popular choices given their resistance to rot from excessive moisture. However, if you prime and paint the fascia, then fir, spruce, and pine can also make beautiful choices from a design standpoint.
What holds the gutter to the fascia?
Quality gutter installation usually makes use of fascia gutter brackets. These should be attached through fascia into rafter tails, rather than to just the fascia, for a secure and long-lasting installation.
What wood do you use for fascia and soffit?
Wood Is a Common Fascia Material
Cedar is a popular fascia wood and redwood is another. That’s because both of these wood species have some natural rot-resistance, even when unpainted. If you prime and paint the fascia, you can also make them out of fir, spruce or pine, which are all less expensive.
What are the boards on the outside of a house called?
Definition of Fascia board or fascia trim: The horizontal board running along the outer edge of a soffit, typically covered or mostly covered by a gutter on modern homes, is the fascia board.
What is gutter board?
gutter board, gutter plank
In a wood gutter along the eaves of a roof, a board on which the lining material of the gutter is laid.
What is the cheapest fascia board?
The material of fascia boards
Wooden fascia board materials range from $1 to $3 per linear foot. Composite fascia boards fall between the price range of $1 and $8 per linear foot. Vinyl fascia boards range between $5 and $8 per linear foot. Aluminum fascia boards are between $8 and $20 per linear foot.
What can I use for soffit board?
Soffit Material Options
- Wood. Wood is one of the oldest materials used for soffits, and like wood siding is still around today. …
- Vinyl. Vinyl soffits are another option that emerged along with vinyl siding in the 1950s. …
- Aluminum. …
- Fiber Cement.
What is a soffit board?
Soffit boards are the horizontal boards which fit under the roofline which together with fascia boards or capping boards finish off the roofline in a weatherproof seal. They are available in 3 different styles, standard utility board, vented soffit boards or lightweight hollow soffit boards.
What is the frieze board?
Frieze board is a type of trim that is typically installed between the top of a home’s siding and the soffit. It’s normally installed flat against the home, but it may be installed at an angle if installed on a gable. Frieze board may also be used as a decorative, horizontal trim anywhere in or on the home.
Should fascia board be treated lumber?
Purchase pressure-treated lumber to replace your fascia boards as a way to extend the life of the repair. Pressure-treated lumber is designed for outside applications and resists rot, moisture and insect damage.
Should I use treated lumber for my fascia board?
Paints up really well and you just paint the backside, paint the whole thing then put it up and then give it a final coat of paint once it’s all in place. It’ll last a long time if you have the proper detail on your home. But pressure treated lumber is not used for fascia boards.
What size board is used for fascia?
Fascia Board Sizes
Fascias are typically made from 1-inch material, with the width being enough to cover the rafter width. Typically rafters will range from 2×6 to 2×8, although some are larger depending on the roof construction. Therefore, the more common fascia board sizes are 1×6 or 1×8.
What material is used for the soffit and fascia?
While soffits and fascia are traditionally constructed from materials like aluminum and wood, many homeowners are now choosing ones made from synthetic and composite materials like UPVC and vinyl because they offer easy maintenance and durability.
Can you use Hardie board for fascia?
HardieTrimboards can be fastened directly over a 2x sub-fascia or directly to rather tails.
What is the best material for fascia boards?
Fascia is typically constructed from one of the following types of material:
- The most common choice due to its affordability.
- Primarily constructed from either spruce, pine, or fir.
- Because it is not water-resistant, wood is subject to rot.
- Must be primed and painted regularly to extend longevity.
How thick should fascia boards be?
1″
Fascia is the term given to the horizontal board that is fixed along the rafter ends at the eaves, closing the gap between each rafter. Traditionally made of 3/4″ or 1″ thick timber, PVC has in recent years become the material of choice for most contractors and developers due to its maintenance-free appeal.
How do you install Hardie on a soffit board?
Quote from the video:
Quote from Youtube video: And three-eighths of an inch from the edge of the panel for soffits wider than 12 inches keep fasteners 2 inches away from the corners. And 3/8 of an inch away from the edge of the panel.
Can Hardie board be used for soffit?
HardieSoffit® panels are 8 ft. and 12 ft. long, ¼ in. thick factory-primed fiber-cement panels designed to be used on the underside of eaves as soffit material.
Can you use Hardie panel as soffit?
HardieSoffit® panels may be installed as a soffit or ceiling over either wood or steel 20 gauge (33 mils) minimum to 16 gauge (54 mils) framing complying with the local building code.
