Can you swap a dimmer switch with a regular switch?
Make sure you have the appropriate type of standard switch (if you have a three-way dimmer, you’ll need a three-way switch, and so on), then identify your wires. The thick, green-coated or copper-colored wire will be your grounding wire, and the black and red-coated wires are your traveler wires.
How do you change a dimmer switch to a single pole switch?
Quote from the video:
Quote from Youtube video: First thing you want to do is turn off the power to the circuit you're working on and double check it with a tester remove the cover and pull out the old switch.
Can you bypass a dimmer switch?
To bypass a dimmer switch, you will need to remove the switch from the wall and reconnect the electrical wires in the original circuit configuration.
What is the red wire on a dimmer switch?
Red is the switched lead (or a traveler in a 3-way installation), and is attached to the switched hot going to the light. Red with white is a traveler, used for 3-way installations. In your situation, you’ll just cap this one off. Green is ground, and is attached to the grounding conductor.
Does it matter which wire goes where on a light switch?
In the case of a single-pole switch, these wires are interchangeable—it doesn’t make any difference which wire is attached to which screw terminal. Inside the switch is a metal pathway that closes when the switch is in the ON position and opens to interrupt the flow of power when the switch is turned OFF.
What happens if you wire a light switch wrong?
But here’s the catch: If you connect the circuit wires to the wrong terminals on an outlet, the outlet will still work, but the polarity will be backward. When this happens, a lamp, for example, will have its bulb socket sleeve energized rather than the little tab inside the socket.
Why is there two black wires in light switch?
Black means hot, white signifies neutral, and green indicates ground. However, if you need to rewire a light switch or a plug socket, you may occasionally come across two black wires. It’s essential that you determine which black wire is hot before proceeding.
