Do you use the same drywall for ceilings and walls?
Yes, you should install drywall on the ceiling before the walls for multiple reasons: The drywall on the walls can support the ceiling pieces. You can create tight and fitted corners more easily. The pieces are easier and faster to work with from the top.
What is the difference between ceiling drywall and regular drywall?
With the exception of a couple of chemicals that allow the Sheetrock formula to be patented, there is practically no difference between Sheetrock and other drywall. Either can be used as construction material for walls and ceilings.
Do you need special drywall for ceiling?
Although you can use any type of drywall for ceilings as long as its installed correctly (even ultralight 1/4-inch thick drywall), a thicker panel is best. 5/8-inch thick drywall is the sturdiest which prevents sagging between ceiling joists.
Can you use lightweight drywall on ceilings?
There is no appreciable design advantage for ultralight drywall over standard drywall. This is a material that can be used for all wall and ceiling finish surfaces in any residential application.
What thickness drywall is used for ceilings?
1/2-Inch-Thick Drywall
Half-inch drywall panels are the standard thickness for interior walls, as well as ceilings.
Should ceiling drywall be staggered?
It’s not necessary to stagger seams on ceiling drywall. However, because these joints are relatively difficult to finish – and tend to be noticeable in the finished product – it’s a good idea to stagger the drywall panels to make the joints less visible.
Can you use regular drywall in a bathroom ceiling?
Conventional drywall is commonly used for ceilings in non-shower/tub areas of bathrooms, although some builders prefer to use moisture-resistant drywall — aka greenboard — instead. Moisture-resistant drywall is similar to standard drywall but has face paper that’s treated for extra resistance to mold and moisture.
Can you use 3/8 drywall ceiling?
Moreover, for soundproofing, fire resistance, and moisture resistance, the building drywall thickness code recommends the use of heavy and thicker ceiling drywall. In this case, it will be ½ inch and 3/8 inch, which may also feature two ceiling drywall layers.
How long should drywall screws be for ceiling?
Less common — 1-5/8”: To prevent sags, thicker drywall measuring 5/8” is used on ceilings. To secure that added weight, use #6 screws measuring 1-5/8” to allow 1-inch penetration into the wood.
Can I use half inch drywall on ceiling?
Use 1/2-inch thick green board on ceilings with joists spaced 12 inches apart or fewer and 5/8-inch drywall on ceilings with joists up to 16 inches apart. Use a waterproof wall material over green board in moisture-prone areas.
How far can you SPAN 1/2 drywall on ceiling?
What is the maximum joist spacing for ceiling drywall? Does it matter if the panels are oriented parallel or perpendicular to the joists? 1/2- or 5/8-inch drywall is 24 inches on-center. Ceiling drywall should always be installed perpendicular to the joists, even when they are 16 inches on-center.
Does ultra light drywall sag?
UltraLight’s superior sag resistance (equivalent to 5/8-in. type-X drywall) also enables me to hang wallboard on ceilings with joists or rafters spaced 24 in. on center, which is becoming more common in energy-efficient construction.
Is lightweight drywall as good as regular drywall?
Although both standard drywall and lightweight drywall are good for any room in your house (except the bathroom) the lightweight option is more user-friendly. Since it is lighter, carrying it around and hanging it isn’t incredibly difficult.
Which direction should you hang drywall?
Commercial: Hang the drywall vertically. On commercial jobs, fire codes often require seams to fall on the entire length of the framing, so the drywall must be hung vertically. Residential: How high are the walls? For walls nine feet high or shorter, hanging the drywall horizontally has a number of benefits.
When nailing drywall the head of the nail should be?
Putting Drywall Screws and Drywall Nails in Successfully
With nails, you will have a slight dimple around the head; with screws, try and get the head about 1/32 of an inch below the surface of the drywall, creating a slight indentation.
Should I use #6 or #8 drywall screws?
In most cases, you will be using either #6 or #8 drywall screws. Keep in mind that as gauge numbers increase, the screw becomes larger in diameter. So, a #6 drywall screw would be thinner than a #8 drywall screw. While this may seem evident, many materials related to home construction work in the opposite direction.
How many screws go into a 4×8 sheet of drywall?
Use about 32 drywall screws per sheet of 4-foot by 8-foot drywall installed horizontally on a wall. This total is comprised of four screws on the five middle studs and six screws on each of the two sides.
Why do builders use nails instead of screws for drywall?
Nails are Built of Sturdy Materials
Nails work better under pressure and can be used for more challenging jobs requiring more weight. Because of their shear strength, nails don’t break as easily as screws. However, depending on how great the force is and the nail’s quality, the nails can bend out of shape.
Should drywall be nailed or screwed?
While nails tend to be more flexible and hold up better against shear pressure—or lateral force—screws have much better grip and tensile strength, which ultimately keeps drywall from pulling away from the studs. When it comes to holding power, screws simply can’t be beaten.
Are wood screws stronger than drywall screws?
Drywall screws are hardened so that the Phillips slots won’t strip out under the stress from high-speed screw guns. Wood screws are thicker and made of softer metal, making them more snap-resistant. Different thread patterns make the screws work slightly differently too.
