The most common reason this happens is due to a clogged drain. When you have a clogged drain it indicates there is a sewer issue that causes sewage backup through your bathtub drain.

Why is my tub filling up with water when I shower?

Excess hair, soap residue, and other problems cause a tub to fill faster than it drains during showers or baths. This issue is usually resolved quickly by clearing the clog and getting your pipes flowing freely again.

What to do if water backs up in shower?





Some people use a mix of baking soda and vinegar to dissolve the clog. Once the baking soda and vinegar have set for about five minutes, then you can flush the debris down the drain with hot water. This DIY trick works for smaller clogs. For bigger clogs, you may need to use a plumber’s snake.

How do you unclog a main drain line?

Your step-by-step guide: How to clear a main sewer line clog

  1. Loosen the cap on the drain pipe. …
  2. Allow any sewer buildup to come out of the drain. …
  3. Gently feed the auger cable into the main line drain. …
  4. Run the auger until the clog is broken up. …
  5. Hose out leftover debris. …
  6. Pull the auger cable back out of the main line drain.

How do you clear a bathtub drain backup?

All you need to do is pour a pot of boiling water down the bathtub drain. Then pour a mixture of one cup baking soda and one cup vinegar into the drain. Insert the drain plug, or close the filter, and wait 5–10 minutes. Finally, flush the drain with another pot of boiling water.

How do you know if your sewer line is clogged?





If you notice that water backs up in random places as you’re using water fixtures, you likely have a blockage in the main sewer line. Two common examples of this include: When you flush your toilet, water backs up into the bathtub/shower. When you run your washing machine, sinks or toilets start to overflow.

Will Drano unclog sewer line?

Bust a Sewer Clog With Enzyme-Based Drain Cleaner

It’s hardly ever a good idea to put Drano or a similar product in the toilet because it contains sodium hydroxide, which generates heat and can damage the pipes.

What causes a tub not to drain?

Common reasons why a bathtub won’t drain include soap scum, hair, bath bombs, cosmetic products, and damaged pipes. You can fix such plumbing problems using boiling water, baking soda and vinegar, a plunger, or a plumbing snake.

How do you fix a bathtub drain that won’t drain?



Here are the ways you can try to unclog a bathtub or shower drain on your own:

  1. Put on gloves and remove any visible blockage (hair, etc.) …
  2. Plunge the bathtub or shower drain with a plunger. …
  3. Use a plumbing snake to try to dislodge whatever is in your drain. …
  4. Try dissolving clogs without hazardous chemicals.

Can bleach unclog a drain?

Bleach. Though you might not want to use bleach in your kitchen, near your food, knowing how to unclog a bathtub drain with bleach is helpful. Carefully pour some bleach into a cup and dump it down your bathtub or shower drain. Let it sit for about 15 minutes and then flush the drain with hot water.

Will Coke unclog drains?



Coke. Coke is a lesser-known fix you can find in your refrigerator. Pour a 2-liter bottle of cola — Pepsi, Coke, or generic brand substitutes — down the clogged drain. Coke is actually quite caustic and effective at clearing away buildup in your drains, but it’s far milder than commercial drain cleaners.

What dissolves hair in shower drain?

Combining baking soda and vinegar is a natural way to dissolve hair clogs, without resorting to harsh chemicals. Pour a cup of baking soda down the clogged drain first, and then after a few minutes add a cup of vinegar.