What if new sink drain doesn’t line up with existing pipes?
In general, if the P-trap doesn’t line up with the drain, you can adjust the length and height of your drainpipes by cutting them or simply slipping them in and out of their fittings.
How do you extend a pipe under a sink?
Quote from the video:
Quote from Youtube video: So you need the proper washer insert the retention nut. And the nylon washer. And loosen up there p-trap. And install the extension tail piece. And stole another retention nut.
How do you close a gap around a pipe?
Quote from the video:
Quote from Youtube video: Hold the can of expanding foam upside down and direct the applicator inside the hole applying. Pressure as required shake. The can from time to time during use.
How do you offset a sink drain?
Quote from the video:
Quote from Youtube video: The drain pipe coming out of the wall to one and a half inch PVC pipe from the Builder. So what I have here is this is a one and a half inch. This is a flush inside coupling. So this will cement.
Can you use flexible pipe for sink drain?
Flexible drain parts can be used to quickly connect offset sink drains. If you have ever been a little short on pipe or had drain trap fittings that were just shy of the necessary length or angle, you’ll appreciate the usefulness of flexible drain parts.
What is a trap adapter?
PVC Threaded Trap Adapter to connect your sink drainage to the drain pipe that extends through the wall or floor. Designed to fit most tubular drain applications, this universal adapter is constructed from PVC plastic.
What is a PVC pipe extender?
PVC pipe extenders are usually used in repair situations where you need an extra bit of pipe to connect to your fitting, valve, etc. Pipe extenders work by fitting inside Schedule 40 PVC pipe on one side, and fitting inside a standard socket fitting on the other side.
How do you lengthen a pipe?
Using Pipe Extenders
You may also extend PVC pipes with special fittings called extenders. These pieces have a small end that fits inside a pipe and a larger end that matches the outer diameter of the pipe you connect. From the outside, therefore, the pipe will appear to be all one size.
How do you extend a waste pipe?
Quote from the video:
Quote from Youtube video: So one easy thing to do is to get one of these two-way connectors. You just pop it in there and get some more pipe which i've already got that's going to the spigot.
How far off center can a sink drain be?
Rough-In Dimension Terminology
| Toilet | Sink | |
|---|---|---|
| Supply Line (Horizontal) | 6″ max from center | 4″ to left and right of center |
| Discharge/Drain Hole from Back Wall | 12 1/2″ | N/A |
| Discharge/Drain Hole (Vertical) | 0″ | 16″ to 20″ |
| Fixture (Side to Side Buffer) | 15″ to 18″ min | 15″ to 20″ min |
How do you install an offset drain?
Quote from the video:
Quote from Youtube video: And your liner for the shower pan goes in between you take this apart in the liner goes in between put a bead of silicon. And then clamp it down once this is installed.
Can you offset a bathroom sink?
If you’re downsizing your existing vanity to make more room for alternative storage, offsetting the sink allows you to scoot the vanity out of the way, making more space for your new furniture without turning a simple remodel into an expensive renovation.
Are flexible drains good?
Problems with flexible drain pipe
The zigzag sides are great for slowing down the flow of water and letting the gunk sit and collect. Making matters worse, since they slow down the flow of water, gunk can easily collect further down the pipe, especially if they pipe already isn’t 100% clear.
Are snappy traps legal?
Yes, Snappy Trap™ model numbers DK-110 and DK-100 are certified by the International Association of Plumbing and Mechanical Officials (IAPMO) to meet the Uniform Plumbing Code (UPC). The UPC certification is valid in all US 50 states and Canada.
Are flexible waste pipes any good?
Having to use a flexible waste is just poor plumbing design. In MOST cases. I have had to use a couple recently. The first was to get a bathroom basin waste back a very short distance – joints would not have done it and I have kept it near vertical so very little will catch in the folds.
Are accordion drains good?
The major problem accordion pipe has is the collection of grime, hair, dirt, and other small items which may fall in the drain. The design of the pipe allows for debris to easily collect in the waste line. With the collection of all the goop, the drain begins to slowly clog and not drain properly.
How do you connect pipes under sink?
Quote from the video:
Quote from Youtube video: Into place take a nut with the threads facing down slide it up the tailpiece on the sink drain while holding the nut into place choose the proper size washer.
How do you connect two waste pipes together?
Quote from the video:
Quote from Youtube video: And just push them together and just give it a slight twist back and forward like that. And that's it there's no need to do any more any excess like that just wipe it off.
How do you connect existing drainage?
Quote from the video:
Quote from Youtube video: Line attaching a tea to existing corrugated pipe is actually very simple make your measurement where the pipe comes through to the end of your coupling. Cut the pipe.
How do you join plastic drain pipes?
Quote from the video:
Quote from Youtube video: Now while the primer is still wet apply a healthy coat of cement to the outside of the pipe. Then move to the inside of the fitting without redoing go for a second dip and hit the outside of the pipe.
