How do you get power from a plug to a switch?
Quote from Youtube video: And then you would take the black wire of the romex. Tie it into this feed line right here tie it into this feed line pigtail. It with the black.
Which wire should be connected to switch?
live wire
Switch should be connected to the live wire. Switch should be connected to the neutral wire.
Does power go to switch or light?
With power-through wiring, power enters the switch box directly. The feed wire (the hot wire coming from the service panel) runs to the switch before it goes to the fixture.
Can you run power from switch to switch?
You can pull power from a switch box—sometimes
Switch boxes can sometimes be used as a power source for a new outlet, but only if the box is large enough and has neutral and ground wires running through it.
Can you get power from outlet to light switch?
Adding an electrical outlet next to an existing light switch is easy, as long as there is a neutral wire in the box. Step 1: Turn the power supply off to the light switch at the main electrical panel. Step 2: Remove the switch plate and unscrew the switch from the outlet box. Step 3: Pull the switch out from the box.
How do I wire a switch to an existing outlet?
Step 1: Install a box for the new electrical switch and run a red, a white, a green and a black 12- or 14-gauge wire from the existing outlet to the new switch box. Strip the ends of the new wires. Step 2: In the switch box, connect the green wire to the grounding screw on the switch.
Which color wire goes to the switch?
Black wires are hot wires that run to the electrical outlet from the switch. Red wires are hot wires common in a 240-volt outlet or when a wall switch controls the outlet. Blue and yellow wires are hot wires for ceiling fans and three- or four-way switches. White or gray electrical wires are neutral wires.
Should switch be on live or neutral?
live wire
The switch must be placed in live wire to maintain the body of appliance at zero potential in the switch off position and if the switch is kept in neutral wire, then the body of the appliance to keep the body at infinite potential in the switch on position.
Does it matter what wire goes where on a light switch?
In the case of a single-pole switch, these wires are interchangeable—it doesn’t make any difference which wire is attached to which screw terminal. Inside the switch is a metal pathway that closes when the switch is in the ON position and opens to interrupt the flow of power when the switch is turned OFF.
Can you wire a socket from a light switch?
If there is only a single cable into the box, where the brown goes into COM on the switch plate and the blue goes into L1, the blue is switched live and is NOT neutral. If this is the case you most definitely cannot safely add a socket.
Can you run a spur from a light switch?
You’d probably do better running the spur from the nearest light fitting, or the CU (fuse box) unless there is as some have pointed out, a neutral at the light switch.
Can you run a fused spur off a light switch?
You can install either a switched fused spur, which will also function as the on-off button or an unswitched fused spur alongside a conventional light switch.
How do you live feed a light switch?
Quote from the video:
Quote from Youtube video: Position. So it's taken over a permanent line and a neutral to the other position and the black conductor of the three core is now not being used as it's just taking the feed to the other switch.
Can I spur off a socket for a light?
You need the neutral to make the light work but you can take a spur from the socket underneath the desk for a light, you could place a FCU next to socket underneath desk then run cable to light switch and then on to light fitting .. you cannot run spur to spur with sockets incase of over load of cable but a light is
How many Spurs can I take off a socket?
A spur can be connected to an existing socket, on either a ring main or a radial circuit, providing that socket does not already have a spur. That is only one spur per socket is allowed and the number of spurs must not exceed the number of sockets.
Can I use a plug instead of a fused spur?
So as long as the plug sockets are accessible without touching the appliance to turn it off then this is fine, but also a fused spur is fine too.”
