How do you hang something heavy on a concrete ceiling?

Use Adhesive Wall Hooks for Lightweight Objects. Adhesive wall hooks are great for hanging items like plants from a concrete ceiling. What’s more, adhesive walls are easy to use, easy to remove, and don’t require any drilling.

What anchors for concrete ceiling?





Type

  • Plastic anchors, or conical anchors, insert directly into the pre-drilled hole. …
  • Hammer-set concrete anchors are light-duty anchors that DIYers can use to secure wood and other materials to solid concrete.

How do you screw a hook into a concrete ceiling?

  1. Place a ladder under the ceiling where you want to place the hook. Stand on the ladder and mark the planned hook location with a pencil. …
  2. Put on safety glasses. …
  3. Place the masonry anchor into the hole. …
  4. Insert the threaded end of the hook into the anchor.
  5. How do you hang drywall on a concrete ceiling?

    When installing drywall onto any concrete surface, including a ceiling, you need to install furring strips. Furring strips are long strips of wood that measure 1-inch thick and usually 2 or 3-inches wide. Furring strips allow an air gap between the drywall and concrete to allow air to move and prevent mold.

    Can I drill into a concrete ceiling?

    Set up the overhead drill press. Secure the drill into the press and then raise it until the bit almost touches the ceiling. Move the overhead press to line the drill bit up with your mark and then lock the wheels in place to prevent movement while drilling. Raise the drill again until the bit touches the ceiling.

    Can you hang something from a concrete ceiling?

    If you need to hang something from a cement ceiling, you cannot simply drive a nail or screw into the cement. You must take steps to safely secure the fastener or it will quickly tear out of the ceiling. With a cement wall anchor, you can secure heavier items to the ceiling without fear of the anchors coming out.

    Can you attach drywall directly to concrete?





    You can glue drywall sheets to a concrete block wall. Drywall is usually attached to wall studs with 2-inch drywall screws using an electric drill with a driver bit installed. However, in some installations, such as in a basement, it is necessary to glue drywall sheets to the interior of concrete block walls.

    What should I put between drywall and concrete?

    The solution is covering concrete with a vapor barrier, which acts like a resistant cell membrane instead. With a shield in place, the drywall is safe. Typically, a stud wall is then installed against the concrete, but furring strips are quick, easy and take up less space.

    Can you plasterboard a concrete ceiling?

    It is entirely possible to plasterboard an existing, concrete ceiling or new ceiling by yourself with some special techniques and lifting tools.

    How do you attach furring strips to a concrete ceiling?

    Use a hammer drill, drill holes using the correct diameter carbide-tipped masonry bit for the concrete screw diameter in use. Drill the masonry hole 1/2 deeper than the fastener embedment. Vacuum holes of masonry dust. Drive the Tapcon screws into the holes of furring strips with an impact driver and nut driver.

    How do you attach wood to a concrete ceiling?



    The fastest and easiest way to attach most wood parts to concrete is to use a powder-actuated gun. To use it, load a special gun nail and a . 22 caliber gun shell into the barrel. Press the nose against the workpiece, pull the trigger and the shell will drive the fastener directly into the concrete.

    Can you stick plasterboard to a ceiling?

    It is possible to fix plasterboard over an existing ceiling, but you’ll need to determine where the joists are first. For upstairs rooms this can be done by measuring the joist gaps in the loft. Downstairs you’ll have to prod the ceiling with an awl or lift the floorboards in the room above.

    What plasterboard should I use for ceilings?

    For a standard wall, you should purchase plasterboard with a thickness of 12mm and for a ceiling, the preferable thickness of drywall is around 12.5mm. For a bathroom ceiling, you should choose a plasterboard with a thickness of either 12mm or 12.5mm.

    How do you fix insulated plasterboard to the ceiling?



    Quote from the video:
    Quote from Youtube video: Drive all the fixings. Straight with heads embedded just below the surface of the plasterboard to finish seal the perimeter of the insulated plaster board with a flexible sealant or equivalent you.

    How do you overboard a plasterboard ceiling?

    Quote from the video:
    Quote from Youtube video: Just to get a bit of a head start and get things laid out ready for you to see exactly what today when you're over board in the main problem is you can't see when the juicer. Across the ceiling.

    Is it OK to overboard a ceiling?

    Yes it is possible to overboard the existing ceiling. I prefer to remove them (you can limit the mess by cleaning above the ceiling in the loft space) but if this is not possible then overboarding is your best bet. It is fine to plasterboard straight over the top of the existing ceiling.

    Can you overboard a ceiling with 9mm plasterboard?

    9.5mm plasterboard is fine to use, if you want to use 12mm boards it is up to you,i have been doing this type of work for many years and have never had any call backs on joints cracking or any other problems.