What is the best insulation for an attic ceiling?
Spray foam offers the best attic insulation performance available. Choose from two types: closed-cell and open-cell, aka 2-pound and ½-pound, respectively. They sport insulation values of approximately R-6.5 and R-3.6 per inch, respectively.
What is the best way to insulate a ceiling?
Quote from the video:
Quote from Youtube video: If local regulations call for stapling of faced insulation. Simply open the flange of the facing. And staple it to the inside of the joist. Or the face of the stud every eight to twelve inches.
Do you put insulation in the ceiling?
In addition to walls and attics, insulation should be installed in ceilings with unheated spaces, basement walls, floors above vented crawl spaces, cathedral ceilings, floors over unheated garages or porches, knee walls, and in between interior walls—especially bathrooms—as well as ceilings and floors.
Should I insulate attic ceiling?
Should you insulate your attic roof? Insulation is a wise choice to increase the energy efficiency of your home. Quality insulation will make it more cost-effective to heat and cool your home, The Department of Energy’s estimates range from a 10% to 50% savings, depending on several factors.
Can you have too much insulation in your attic?
It’s possible to over-insulate an attic as too much will cause moisture buildup and eventually result in mold. Eventually, adding more insulation leads to diminishing returns in trapping heat as well.
Is it better to insulate ceiling or roof?
If you are deciding between insulating the roof deck or the ceiling, Insulating your ceiling should be the priority. Not only is it easier but ceiling insulation is beneficial in a number of ways: Keeps the temperature in the building regulated. Saves on energy costs.
Is it OK to insulate roof rafters?
Insulating between rafters will do no good, because the attic should be ventilated, and the rafter insulation would be between two unheated spaces. You can add insulation to the floor; the more the merrier. Just don’t put it in the eaves. Also, make sure the attic is well ventilated.
Should you insulate the underside of your roof?
roof insulation is no-contest. The floor wins every time. Insulating the floor is standard practice for an unfinished attic space. The exception to this rule takes place when families opt to convert an unfinished attic space into something usable or livable.
Should I spray foam my attic ceiling?
Insulating the attic rafters with spray foam creates a conditioned space where your attic is the same temperature as the rest of your home. This keeps the external weather and moisture outside of the attic space so you don’t have to worry about any moisture problems or air infiltration.
Should I put a vapor barrier on my ceiling?
In hot-dry climates a vapor retarder should also not be installed, but attics can be vented. All attics — vented or unvented — should have an air barrier (a properly detailed airtight drywall ceiling, for example) regardless of climate.
How do you insulate a finished attic ceiling?
Quote from the video:
Quote from Youtube video: If the insulation you're using is thicker than the joist space then you must install baffles over the entire length of the roof deck surface to allow for ventilation of the roof.
How many inches of insulation should I have in my attic?
about 10 to 14 inches
The recommended level for most attics is to insulate to R-38 or about 10 to 14 inches, depending on insulation type.
Should I remove old attic insulation before adding new?
Expert contractors that specialize in insulation advise that removing old fiberglass insulation is best before installing new cellulose insulation because of possible mildew, mold, or rodent excrement.
How do you insulate between rafters?
Warm loft. An alternative way to insulate your loft is to fit the insulation between and over the rafters – these are the sloping timbers that make up the roof itself. You can use rigid insulation boards, carefully cut to size, or you can have foam insulation sprayed between the rafters.
Do you need an air gap for insulation?
Insulation is technically a solid with a lot of air in it therefore, it is NOT an air gap. You literally must have a VOID, nothing in the air gap except air itself. So if you are installing under a roof or in a wall, you must create an air gap.
How thick should insulation be between rafters?
Common rafter depths range from 100mm to 200mm. This limits the maximum thickness of the insulation between the rafters to between 50mm and 175mm. This generally would not be a sufficient thickness to achieve the U-values required to meet Building Regulations and more insulation would need to be added.
Should loft insulation be pushed up to the eaves?
Don’t pack it in: squashing insulation to fit the space seriously compromises its effectiveness. Also avoid pushing the insulation into the eaves to keep ventilation paths at the edge of the roof well aired and roof timbers dry.
Can I lay loft insulation over cables?
Whenever you read about laying loft insulation all the instructions state that insulation should not be laid over wiring. However, if you contact loft insulation companies, they all say the same thing…they lay over the cables!
Can I put loft insulation on top of boards?
Yes you can most certainly overlay and additional layer of insulation over the chipboard. I would leave the insulation short at the eaves though to ensure there is adequate ventilation in the loft space. This would most certainly improve you homes thermal performance during winter months.
