How to Move a Washing Machine

  1. Unplug washer, open door, let dry for 24 hours.
  2. Turn off water supply.
  3. Disconnect hoses.
  4. Secure the tub.
  5. Clean and dry outside of machine.
  6. Tape door shut.
  7. Cover with moving blanket.
  8. Move using dolly.

How do I protect my washer and dryer when moving?

To keep it in place during the move, you’ll need to secure it with shipping bolts. Next, protect the washer with moving blankets. We recommend holding the moving blanket in place with packing tape. Once the washer is properly protected with a moving blanket, gently move it (with the help of friends) towards the dolly.

Is it worth it to move a washer and dryer?





If you want to move your appliance, determine what its remaining lifespan is, and decide whether it’s worth it to bring it with you at all. If your washer is 15 years old, it’s better to leave it and purchase a newer model for your new home.

Is it easy to relocate washer and dryer?

The cost to relocate washer and dryer hookups can run up to $2,000 depending on complexity. Budget roughly $50 to $175 per unit for the simplest, most-straightforward projects. You can hire a local handyperson for the job, but you may need an electrician to install new outlets.

What do I need to move a washer and dryer?

HOW TO MOVE YOUR WASHER & DRYER

  1. Hand Truck/Dolly.
  2. Duct Tape.
  3. Straps strong enough to affix the appliances to the dolly.


How do you move a heavy washing machine by yourself?





Moving stage: How to move a washing machine by yourself [5 steps]

  1. Fasten the power cord. …
  2. Pull out the washer completely. …
  3. Pack the washing machines in blankets. …
  4. Load the washer onto the appliance dolly. …
  5. Load the washer into the moving truck.


How heavy is a washer?

On average, washing machines weigh 170 pounds, and dryers weigh 124 pounds. However, the weight of these appliances varies significantly based on type, capacity, features, and brand. Small-load washers can weigh as little as 99 pounds while extra-large washers can weigh up to 300 pounds.

How do you push a washing machine back into place?

Squat in front of the machine, one foot against the bottom of it for pushing, open the door, grab inside the top of the drum rim, and pull to lift at the back while pushing the bottom with your foot. Job done.

Can you transport a washer and dryer laying down?



It’s recommended you always keep a washing machine in an upright position. Laying a washer on its side can cause the inner and outer tubs to bump against each other, which can loosen support pads or damage the suspension. It can also cause the tubs to move out of alignment and alter the way your unit works.

How do you move a washing machine without a dolly?

How to move a washing machine by yourself: step-by-step guide

  1. Empty your washer. …
  2. Clean the drum and drain lines. …
  3. Turn off the power. …
  4. Turn off the water supply. …
  5. Drain the water supply hoses. …
  6. Remove the water supply hoses. …
  7. Empty the drain hose. …
  8. Place the transit bolts.

Can one person move a washing machine?

Washing machines need to be disconnected and drained properly before a move. Washing machines can also be quite heavy. Although it is possible to move a washing machine by yourself, it’s safer and easier to get help.

How do you lift a dryer on top of a washing machine by yourself?



Youtube quote:And then you just need a recycling bin. It goes right up against the washer you disconnect the dryer from behind is usually just four Phillips head screws that you have to remove.

How do you disconnect a washing machine and move it?

FAQ: How do I disconnect and move my washing machine?

  1. Step 1 – Turn off Water. Turn off the water valves behind or near the washer which its hoses are connected to. …
  2. Step 2 – Remove remaining Water. …
  3. Step 3 – Switch off the machine. …
  4. Step 4 – Detach hoses. …
  5. Step 5 – Detach drain hose. …
  6. Step 6 – Move the machine. …
  7. Step 7 – Clean up.


How do you move a washer and dryer hookup?

Youtube quote:So I can't push the washer and dryer into that corner because then it would cover the electrical panel and that's a heavy difficult thing to move if I would have to access the circuit breakers.

Can you move a washing machine without transit bolts?



Moving a washing machine without transit bolts will run the serious risk of damaging your machine, so we strongly advise against it. Washing machine transit bolts are a vital piece of equipment required to move your washing machine securely. A washing machine is a complex piece of equipment with many moving parts.

Do I need a plumber to disconnect a washing machine?

Before connecting the washing machine, make sure that the transit bolts have been removed from the back of the machine. If you prefer not to risk it, or the new machine is different from the old one, you can call a plumber.

How do you move a washing machine?

Youtube quote:But if you've got quite long hoses and you're worried that as you're pushing the Machine back they might pinch or cause strain at the joints. Here's a little tip they've garden twine bit of string.

How do you unplug a dryer?

If you have an electric dryer, simply unplug the cord and secure it to the back of the dryer with duct tape. If you have a gas dryer, turn off the gas source completely. Remove the supply hose from both the gas outlet and the dryer and store it inside the dryer drum.