Instructions
- Remove the Original Drain Fitting. Use a tub drain wrench to unscrew the drain fitting counterclockwise, levering the wrench against the crosshairs inside the drain fitting. …
- Prepare the New Drain Fitting. …
- Insert the New Fitting. …
- Secure the New Fitting. …
- Install Other Drain Pieces. …
- Check Your Work.
How do you remove a broken bathtub drain?
Quote from the video:
Quote from Youtube video: You know regular pliers. And a small hammer like this one take it put it inside of the drain. And then use the um pliers to put between the hammer.
How do you remove a fiberglass shower drain?
Quote from the video:
Quote from Youtube video: You may see flange brackets that are nailed. Or fastened to the wall studs that go out over the shower pan liner. And that in that particular case you need to remove those clamps.
What is a P trap in a mobile home?
Beneath your bathroom or kitchen sink, you will find a plumbing fixture called a P-trap. The purpose of your P-trap is to capture the debris that drains from the sink, prevent clogs and prevent gas leaks from entering your home.
How do you remove a walk in shower drain?
Quote from the video:
Quote from Youtube video: One get yourself some wd-40 spray it around the rim of the drain. Let it sit for about 15 minutes or so and then get yourself some pliers that fit into these holes in the drain.
How do you remove a broken drain flange?
Quote from the video:
Quote from Youtube video: You can see here I've got my screwdriver to actually break open one side of the tub drain. This point I'm taking my hammer. And I'm hitting the screwdriver underneath the tub drain.
Are all tub drains threaded?
There are several different styles of tub drain — two of the most common are threaded and drop-in drains. Threaded drains are usually found in older tubs, while the drop-in version is common in newer models. Determining whether you have one or the other involves a bit of inspection.
How do you remove a drain from a fiberglass tub?
Remove the Drain
- Lay down a few bathmats in the fiberglass tub, so boots and tools do not scratch, gouge or otherwise damage it.
- Remove the original drain assembly. …
- Unscrew the drain basket. …
- Unscrew the overflow plate from the side of the tub and pull it out.
How do you move a bathtub drain in a mobile home?
Instructions
- Remove the Original Drain Fitting. Use a tub drain wrench to unscrew the drain fitting counterclockwise, levering the wrench against the crosshairs inside the drain fitting. …
- Prepare the New Drain Fitting. …
- Insert the New Fitting. …
- Secure the New Fitting. …
- Install Other Drain Pieces. …
- Check Your Work.
How do you remove an old shower drain?
Quote from the video:
Quote from Youtube video: Pipe you can pull up the entire unit you could try to wiggle. At that gasket out with a needle nose pliers. And a flat head screwdriver.
How do I remove an old metal shower drain?
REMOVAL OF EXISTING SHOWER DRAIN BODY
- Remove drain cover with flat blade screwdriver.
- Remove the crown nut by unthreading it using needle nose pliers.
- Extract the compression seal exposing drain pipe and shower drain body.
- With mini hacksaw, make two vertical cuts approximately 1” apart through drain body.
Can you unscrew a shower drain?
Quote from the video:
Quote from Youtube video: Put this guy on and hold the bottom tight with the pliers. And then this thing basically screws off the top. Kind of loosen it to go faster. Once that happens you get this.
How do you remove a shower drain without screws?
If you have a shower drain cover without screws, you’ll need first to identify what kind you have. The most common type is a lift-and-turn cover, which you can remove relatively easily using your hands. Simply pull the cover upwards and then unscrew the base counter-clockwise until it’s loose enough to pull off.
How do you remove a plastic shower drain without screws?
If no screw, simply turn counterclockwise to eliminate. If you see a small screw, turn it with a flathead or Allen wrench up until just loose enough to get rid of stopper (not totally). Pop-Up Drain Covers Some pop-up drain covers pull directly and off. Others must be wiggled back and forth.
How do you remove a push drain?
Quote from the video:
Quote from Youtube video: Head insert a slotted screwdriver into the slot and turn it counterclockwise until the whole shaft comes out. You may need some channel lock pliers to help break the bolt.
What are the different types of shower drains?
The Two Main Types of Shower Drains
- Point Drains.
- Linear Drains.
- Three-Piece Drain.
- One-Piece Drain.
- Multipiece Shower Drain.
What is under a shower drain?
A shower drain is made of several parts. Beneath the removable strainer cover in the shower floor, the drain leads to an under-floor trap that connects to a drain line and the waste/vent stack. The shower pan consists of a waterproof membrane that seals the shower floor.
Where does a shower drain go?
The water that falls over from the shower goes down the drain into a sewer system. At the same time, the drain is designed in such a way that it prevents the back up of sewer gases into the bathroom.
