Can I use my old fence posts?

To recap, reusing fence posts as fence posts should only be done if the wood isn’t too old, is sturdy, and isn’t rotten. If it is too old, not sturdy, or part of it had to be removed because of rot then use the wood for decoration or small structures like short fences or garden hose stands.

How do you remove reuse from a fence post?

Quote from Youtube video: The first thing you will want to do will be to dig out the concrete footing. And clean it out get rid of all the debris. And then you will need to plane.

Can you reuse old fence boards?

Introduction: Reuse Old Fence Boards!

I found that although the boards are very old (up to 50 years in some cases), if they are made out of cedar, they can be in pretty good shape, have lots of integrity left, and can be reused for many helpful projects.

Can metal fence posts be reused?

Whether the fence is over your property line, or maybe the fence was installed badly, you can actually pull chain link fence posts and reuse them. Though it isn’t technically challenging to dig out a fence post, it can be hard work, especially if your posts are set in concrete.

Can you reuse a cemented post?

Posts with concrete at the base are the most difficult to remove and reuse because the concrete base is larger than the post, which makes pulling it up through the ground much harder.

What can you build with old fence posts?

16 Amazing DIY Projects That Make Use Of Repurposed Fence Posts

  • Mail Station From A Fence Post. Tutorial.
  • Fence Post Garden Bench. Tutorial.
  • Fence Post Welcome Sign. Tutorial.
  • Fence Post Porch Pumpkins. Tutorial.
  • Birdhouse Fence. Tutorial.
  • Fencepost Headboard. Tutorial.
  • Marble Fence. Tutorial.
  • Pallet Fence With Flowers And Herbs.

How do you remove a 4×4 post from the ground?

Quote from the video:
Quote from Youtube video: Use a digging bar if you have hard-packed or rocky. Soil. Then wrap the chain around the concrete. And use the slip hook to latch the chain to itself pull the chain tight.

How do you fill old fence post holes?

Set posts on a 6-inch base of ¾-inch crushed stone to encourage drainage. Then fill around posts with the soil from the holes, minus the topsoil, and packs it down every 6 inches. In sandy soil, mix in gravel so that it will pack more firmly. In clay soil, which doesn’t drain well, pack only gravel around posts.

How do you straighten a 4×4 fence post?

If your post is rocking around inside of its concrete footing, a good solution is a steel wedge. These can be driven between the post and concrete footing to straighten a leaning or wobbly post.

What can I do with old metal fence posts?

Quote from the video:
Quote from Youtube video: For or electric wire for just across fence. So I'll use them and if nothing else even the little pieces can be used for welding projects.

How do you reset a metal fence post?

Quote from the video:
Quote from Youtube video: So you need to kind of tag it towards you until it moves then until you reach the desired level like you want that metal post to be straight until that you hit the bubble in the middle see that there.

How do you replace a fence post without removing concrete?

The best way to replace a fence post without removing the concrete footing is by prying it out. You can do this with a long lever and fulcrum or a car jack. In either case, nail some wood to the post first to pry against and then get to work. Pry until the post releases from the concrete and comes all the way out.

How do you remove cement from a post?

Quote from the video:
Quote from Youtube video: Here. Simply move the soil from in front of that post. Over into the hole where the other post was. Now I'm simply going to take my shovel. Come in behind to post and push it forward just like that.

How do you add concrete to an existing post?

Quote from the video:
Quote from Youtube video: You cut the posts off at the level where the concrete's going to be and you have your contractor. Put in cleats in the concrete.

How do you remove wooden posts from concrete?

You can dig around the post hole, and then use several long pry bars to lever the concrete footing out of the ground. If the wood left inside the footing is not completely rotten, then you can sometimes screw a large eyebolt into the wood and then pull it out with a rope or chain.

Does post buddy work?

Yes, Post Buddy will work on a round post, as long as your post is set in a concrete base. It’s the concrete base which is important, as it provides a firm, below-ground anchor for our system. You will need to position the Post Buddys as close to directly opposite each other as possible when fixing a round post.

How do you install a 4×4 post on concrete?

Quote from the video:
Quote from Youtube video: Remove the base and then drill into the concrete using a hammer drill. And masonry drill bits. Move the post support back over the holes.

How do you replace a rotted fence post in concrete?

Quote from the video:
Quote from Youtube video: All right keV you all ready yep we're gonna do it just take it slide the whole section out bring it out oh how bad was that huh.

How do you fix rotting wood post without replacing it?

Wood fillers are products such as Bondo and Minwax that are designed to be all-purpose fillers for gaps, holes, and rotted wood. Their application is simple, they cure quickly, and they’re not supposed to shrink once dry.