What posts should I use for shade sail?
It is recommended to use a round steel post with a minimum diameter of 90mm, or a 90x90mm square steel post. Post wall thickness should be a minimum of 3.5mm.
How do you support sun shades?
Use snap hooks or carbines to attach it to the corners of the sail.
- The corners of the shade should have grommets or steel rings in place. Just attach the hook to the turnbuckle, and then slide it into place over the corner of the shade.
- For one corner, it’s sometimes better to use a tension strap.
How deep should post be for sun shade?
Post lengths should be taken into account with the proposed height of the sail plus the depth of your footings. Footing depth should be a minimum of 36 inches deep and 30inches square. For example, if your post height is higher than 8 feet, we recommend a hole depth 40% of the height above ground.
How do you attach shade cloth to poles?
Simply screw the base rods in place, tuck your shade cloth over the ridge created by the sleeve, and hammer the locking sleeve on to fix the shade cloth.
Can you use 4×4 posts for a shade sail?
If your posts will actually be 12′ above ground, and they’re not supported with any sort of diagonal bracing, you will want 6x6s (or at least 4x6s). 4x4s will flex and bounce substantially at that height.
How do you install sail shade posts?
Wood Shade Sail Post Footing
Lay a 4 inch (100mm) depth of 3/4 inch diameter gravel at the base of the post. Insert the posts using lag bolts partially driven into the post to hold it in place. Use string lines to ensure they are in plumb alignment. Temporarily brace the posts until the concrete has set.
How do you secure a shade sail?
Sail shade step-by-step installation guide
- Obtaining permission. …
- Contact utility companies. …
- Measure and mark bracket location. …
- Attach mounting brackets to your home and verify they are straight with a level. …
- Dig holes if necessary. …
- Mount pad eyes and brackets to external supports. …
- Clip shade to brackets. …
- That’s it!
How do you tension a shade sail?
If your shade sail starts to sag, you can re-tighten it and bring it taught. One way to do this is by using a wire rope that runs through a pocket sewn in the perimeter of your sail. Simply pull the wire rope on each corner until the shade sail retightens and all sagging is removed.
How much wind can a shade sail withstand?
85 mph
When it comes to wind, most shade sails are fabricated to withstand a minimum of 85 mph, three-second gusts. USA SHADE, for one, engineers its structures up to 150 mph, dependent upon the location of the structure.
Are shade sails worth it?
If you want to make the best use of your outside areas, installing a shade sail or waterproof canopy is a fantastic idea. Shade sails offer a great source of sun shade and UV protection, plus water protection, allowing you to enjoy the outdoors and relax outside in comfort.
How big should my shade sail be?
You will want to order a shade sail that is slightly smaller than the area you want to cover. A smaller size prevents the sail from blowing around in windy weather and causing structural damage to the attachment points. When installing the shade sail, you will pull it taut and stretch it as far as possible.
Why are shade sails triangular?
A triangle shaped sail will offer less shade than a square, but it’s more spatially flexible and can fit into smaller areas better. Plus, it has one less fixing point, so you can be a little more imaginative with it.
Which shade sail is best?
When considering garden shade sails, Bunnings shade sails and Mitre 10 shade sails are both good options in this instance. Depending on what type of plant you want to protect, a 50% or 70% UV block out shade cloth is best. Keep in mind that most backyard shade cloth is probably made at 95% UV block out fabric.
What color is best for sun shade?
Darker colors absorb more UV than lighter colors like whites and pastels. This means the UV rays are less likely to reach your skin. But bright colors such as red can also absorb UV rays. The more vivid the color, the greater the protection—a bright yellow shirt is more protective than a pale one.
What is the best material for a sun shade?
Offering an easy to maintain, rust-proof, and durable outdoor shade material, aluminum is a great choice where longevity and strength are a concern. With the application of paint or other protective coatings, aluminum is also resistant to corrosion.
What does GSM stand for in shade sails?
grams per square metre
The first thing you want to do when comparing shade sails for sale is to find out the GSM of the shade fabric. GSM stands for grams per square metre. The higher the GSM weight the higher the shade rating, or the tighter the knit, the heavier and stronger the fabric.
What are the different grades of shade cloth?
There are two types of shade cloths – knitted and woven. For optimum UV protection, The Cancer Council NSW suggests you choose fabric that is dark, closely woven and heavy, as it blocks or absorbs more UV radiation. Shade structures should also have as high a UVR block as possible – at least 94%.
How much does a shade sail weigh?
Which shade sail is best for me?
| UV Protection Factor | GSM Weight (strength for large spans) | |
|---|---|---|
| Rainbow Shade Z16 | Very high (up to 99%) | 200 GSM |
| Rainbow Shade DriZ | Extremely high (up to 100%) | 280 GSM |
| Gale Commercial 95 340 | Extremely high | 340 GSM |
| Monotec 370 | TBC | 370 GSM (plus the only 15-year warranty in the industry) |
