Wet it With a Pump Sprayer For easier scraping and practically no dust during popcorn ceiling removal, use a garden pump sprayer to mist the ceiling and let it soak in for about 15 minutes before scraping. Only give it a light misting—too much water could damage the drywall or loosen the joint tape.

What is the easiest way to remove popcorn ceilings?

Use a wide putty knife or drywall taping knife and gently run it along the wet ceiling,” he says. Be careful not to gouge the ceiling beneath. (Filing the edges of your putty knife can help avoid gouges.) Make your way around the room, until all the texture has been removed.

How do you remove a popcorn ceiling without scraping it?

How to Cover Ugly Popcorn Ceilings Without Scraping It Off

  1. Asbestos in popcorn ceiling material.
  2. Cover popcorn ceiling with drywall.
  3. Add wood panels or beadboard.
  4. Use a drop ceiling.
  5. Install metal ceiling tiles.
  6. Refresh the ceiling.

What can I spray on popcorn ceiling to remove it?

Using your spray bottle filled with warm water, spray an area and let the water soak the popcorn for a moment. What is this? By wetting the popcorn, it reduces the powdery mess and also makes the scraping process easier. Don’t douse the ceiling with water.

What is the cheapest way to cover a popcorn ceiling?

Some of the cheapest options include covering it up with tongue-and-groove wood panels, drywall panels, prepared fiberboard ceiling planks/tiles, fabric, and paint patterns.

Is it worth it to remove popcorn ceiling?

It’s time consuming and annoying, so if you’re bothered enough by it you can have it removed. It’s worth remembering that removing the ceiling in itself will cause a lot more dirt and dust around your home, at least while the work is being carried out. If you’re ok with that, then removing the ceiling is a good idea.

How do you change a popcorn ceiling to smooth?

When scraping popcorn ceilings, you’ll want to use a 4-inch utility knife or a drywall knife to chip away at the texture and create a smooth surface. You’ll probably need to skim it with a thin layer of joint compound to smooth out imperfections, then sand it smooth before repainting.

How long does popcorn ceiling removal take?

The popcorn easily peels right off. No need to power into it. With these long and even strokes my guy removed all the popcorn in less than 30 minutes with zero gouges in the drywall. If you do get any gouges, just use your putty knife to apply a little spackle or joint compound and smooth it out.

Is it better to remove popcorn ceiling or cover it?

Due to removing a popcorn ceiling is time-consuming, messy, requires many skills, and has dangerous asbestos, covering it is the best option.

How do you modernize a popcorn ceiling?

When looking for a way to dress up a ceiling with texture while also hiding that popcorn texture, consider adding wood or wood paneling. Covering the ceiling with tongue and groove wood planks, bead board, or another rustic wood plank or panel is a creative way to add interest to the ceiling and update the space.

How do professionals remove popcorn ceilings?

Quote from Youtube video: And a hose that has fit from a water pump. Outside. They will let this soak for about 20 minutes before they start to scrape off the popcorn.

Is it OK to drywall over popcorn ceiling?

Scraping the old popcorn texture off may not be an option, but installing new drywall right over the old popcorn ceilings is possible with the right tools and a bit of hard work. Old popcorn textured ceilings (also called acoustic ceilings) make a room look dated.

How do you Shiplap popcorn ceilings?

How to Install Shiplap Over Popcorn Ceiling

  1. Remove everything from the ceiling. The first thing you need to do is to remove fixtures from the ceiling. …
  2. Mark the ceiling joists. Use a stud finder to locate and mark the ceiling joists. …
  3. Cut and attach the shiplap planks. …
  4. Caulking and spackling. …
  5. Complete your project.

What is the cheapest way to cover a ceiling?

If you’re looking for an affordable option that’s low maintenance and easy to install, consider a glue-on or staple-on ceiling. They’re available in basic textures and elaborate designs and attach directly to the existing ceiling or onto furring strips attached to the ceiling.