What is the knob next to my gas fireplace?
It’s usually located near the fireplace, usually to the immediate left, right or on the floor. You will control the gas flow with a fireplace key (sometimes called a hex key) as you light the fireplace. Place a long lighter next to the burner and pull the fuel trigger. (You can also use a lit match.)
What is the switch for on my fireplace?
The wall switch of a gas fireplace works protects the gas valve from accidentally turning on. It is a safety measure associated with a pilot flame and a thermopile.
How do I turn on my gas fireplace knob?
Press the control knob down and hit the ignition switch.
To ignite the pilot light, press your finger into the center of the control knob and hold it in place. Then, hit the fireplace’s ignition switch, which is typically a red button located near the control knob. Tap the switch until the pilot light ignites.
What are the parts of a fireplace called?
Fireplace Parts & Terms
- Firebox. The firebox is the part of your fireplace that is typically inside of the wall. …
- Mantel. The mantel is the top horizontal protruding shelf/ledge over a firebox. …
- Mantel Shelf. The mantel may or may not have the depth or design to function as a shelf. …
- Surround. …
- Hearth. …
- Corbel. …
- Plinth.
What is the switch next to my wood fireplace?
A fireplace blower is a fan mounted on the exterior of the fireplace or inside the unit but outside the firebox itself. It is used to circulate air around the unit’s hot exterior before pushing it back into the room. Fireplace fans help to circulate warm air and increase heat penetration into the room.
Why won’t my fireplace turn on when I flip the switch?
What can happen over the years, is that the connections inside the switch can get dirty, corroded, or broken, causing a loss of this voltage at the switch. So by the time the small amount of voltage gets sent back to the fireplace, it is not enough to signal the fireplace to turn on.
How do you test a fireplace wall switch?
Quote from the video:
Quote from Youtube video: A fast way of checking to see if the main burner is not coming on because of the switch circuit is to put a jumper wire around the valve. This takes the switch circuit out completely if the fireplace
What is the area around the fireplace called?
Hearth. Called the outer hearth or hearth extension, this is the area in front of the firebox or inner hearth that’s made of brick or tile to reduce the risk of fires. Fireplace Face. The fireplace face or surround is the part of the fireplace surrounding the firebox that you see in the room.
What are fireplace slips?
Slips are used to cover the area between the surround and the chimney opening opening. Slip sets comprise of 3 rectangular pieces that are usually made to measure for the wall area around your stove. They are usually the same colour and made of the same material as the hearth but not always.
What are the parts of an open fire called?
At the base of the firebox is the hearth, and at the top of the firebox is the throat of the chimney, where a damper can be found in some fireplaces. The front of the firebox is called the fireplace opening, where glass doors can sometimes be found, or where a fireplace screen would be located.
What is the fireplace box?
The firebox is the open-to-the-room, inner section of the fireplace where you light and burn fires. As the name suggests, a firebox has a standard box-like shape. It features a flat base, three walls, and an opening at the front and top. Since the fire burns inside of it, the walls and floor must be non-combustible.
What is the metal part around a fireplace called?
A spark arrestor is typically a metal/mesh covering that when properly fitted to your chimney’s cap will prevent embers or sparks from popping out of the flue (from a burning fire in the fireplace below) while also stopping animals or debris from getting inside.
Why is there a metal plate in my fireplace?
The iron plates absorb a portion of the heat that may otherwise have been lost and reflects it back into the room, increasing efficiency by up to 50%! A bonus that is often overlooked is that firebacks decorate your fireplace.
Where does the baffle plate go?
The simplest way to describe a baffle plate, which is placed at the top of the fire chamber, is a deflector shield which reflects heat back into the combustion chamber. This ensures that as much heat as possible is retained in the stove and emitted into the room in a controlled manner.
What does a register plate do?
A register plate is used to seal the base of a chimney cavity when you do not have a chimney flue liner in your chimney. A closure plate is used when you do have a chimney flue liner in your chimney.
