Can I put a 50 amp breaker in a 60 amp subpanel?
You can put the GFCI breaker in the main panel, and protect every circuit in the subpanel just like that. That would also allow you to use one of GE’s “double-stuff” 2-pole 50A breakers, that is only 1″ tall, leaving you 2 spare half-spaces in the panel.
Can I put a 50 amp breaker in a 50 amp sub panel?
Assuming you’ve got 6 gauge wire feeding the sub panel, you should be fine. As long as you aren’t pulling more than 50 amps through that sub panel at once, you don’t need to worry about over loading the panel. That’s what the 50 amp breaker is there for.
Can I use a 50 amp breaker for a hot tub?
The most valid answer to the question, “What size breaker do I need for a hot tub?” is 50 amps. This is, of course, assuming you also have a standard 40 amp, 220V, or 240V hot tub.
Can you use a 60 amp breaker on a 50 amp service?
The 60 amp 2 pole breaker is over rated for your 50 amp coach. If you were to have some type of problem, the 60 amp breaker will not trip as soon as a 50 amp breaker would. Purchase the correct 50 amp 2 pole breaker and you will not only be safe but done with the project instead of having to go back and re-do it later.
How many amps can a 60 amp sub panel handle?
Many assume that the answer to the question, “How many amps can a 60 amp breaker handle?” should be fairly obvious: 60 amps. While that’s true for most circuit breakers with this capacity, it’s not always the case. According to Code, you have to limit the current to 80%.
How many amps can you put on a 50 amp sub panel?
A single receptacle has a maximum power draw of 1.5-amps, so, only use 26 outlets at most for a 50-amp breaker (40-amps ÷ 1.5-amp = 26.67 outlets).
Can I run a sub panel with a 50 amp breaker?
Using a larger sub panel will not be a problem but the breaker must stay a 50 AMP in the main panel. You can utilize the 50 Amp breaker in the hot tub panel as a connection point for the new wire run or just use that junction as a splice point.
Can you feed a 100 amp sub panel with a 60 amp breaker?
You can feed a 100 Amp panel with a 60 Amp breaker. Keep in mind that the sub panel needs to be rated above the breaker size.
How many amps can a 50 amp breaker handle?
A 50 Amp split phase 120/240 VAC service should be capable of 50 Amps per leg for a total ampacity of 100 Amps. It’s true that you have 50 Amp on each leg for 100 Amp total, but if you get up to 45 Amp continuous on one leg, you will trip the breaker.
What size wire is needed for a 60 amp breaker?
For 60 ampere breakers, electricians and professionals suggest using a wire size gauge ranging from 6 AWG to 4 AWG.
What size wire do I need to run 60 amps 100 feet?
What size wire should I use for a 60 amp subpanel? You can get away with 6 AWG when you have a short run of wire, however, due to voltage drop, if you ever decide you want to go more than 100 feet then a 4 AWG is the size you should choose.
What size wire do I need for a 60 amp hot tub?
WIRE SIZE TABLE
| Amperage of Spa | Gauge of Wire |
|---|---|
| 40-50 amp | AWG #8 |
| 60 amp | AWG #6 |
Can I use a 60 amp breaker for a hot tub?
Most spas will run effectively on a 50amp 2 pole main circuit breaker. Some spa manufacturers require a 60amp breaker. Although some manufacturers state their spas can use 8 guage wiring for a 50amp circuit, we recommend 6 gauge wiring on all 50/60 amp installations.
What size wire is used for 50 amp breaker?
6
50 AMP Wire Size
For a maximum of 50 amps, you’ll need a wire gauge of 6. Fifty amp breakers are most often used to power many different appliances.
What is code for wiring a hot tub?
The National Electrical Code (NEC) requires: Hard-wiring the spa into a ground fault circuit interrupter (GFCI)-protected 220 to 240V, 50 or 60 amp dedicated circuit.
How do you wire a 50 amp hot tub?
Quote from the video:
Quote from Youtube video: Your ground wire is all the way at the bottom. And it is screwed in right here and it is screwed into the box. The common wire is isolated in plastic to keep it away from touching. Anything.
What size wire do I need for 220v hot tub?
6 awg thhn
Upon purchasing the hot tub, many people ask what type & size wire they need for the hot tub install? We recommend looking at our 6 awg thhn/thwn copper building wire for a 220v hot tub that requires 50 amp service, as this is the most popular!
