How do you remove a stuck tub strainer?
Quote from the video:
Quote from Youtube video: And the way that works is you blow some heat right here on the on the drain flange here try not to get any if you have a fiberglass tub. You don't want to overheat it too much this is a metal tub.
How do you remove an old bathtub drain flange?
Quote from the video:
Quote from Youtube video: Because you might snap off one of these pieces. You know put it across like that like so things you want to diagonal. And then you take your adjustable pliers place it on one side just like so.
How do you remove a bathtub drain grate?
Quote from the video:
Quote from Youtube video: And possibly a pipe wrench or a pair of pliers. So the first type is a grate on your bathtub all you got to do is take your phillips head screwdriver unscrew counter clockwise.
How do you remove a bathtub drain fitting?
Quote from the video:
Quote from Youtube video: Down in the hole on the holes neither side of the collar. So they're as deep as you can get them and fairly symmetrical and then we take they just wrench. And we torque on it to remove it.
What are the different types of bathtub drain stoppers?
The six most common types of bathtub drain stoppers are push-and-pull, pop-up, lift-and-turn, flip-it, toe-touch, and trip lever. It does not matter what type you have unless it must be fixed or replaced. The sole purpose of a bathtub stopper is to keep the water in the tub while you soak.
How do you remove a bathtub drain cover without screws?
Quote from the video:
Quote from Youtube video: One get yourself some wd-40 spray it around the rim of the drain. Let it sit for about 15 minutes or so and then get yourself some pliers that fit into these holes in the drain.
Are all bathtub drain threads the same?
One of the most confusing and annoying plumbing problems is replacing the bathtub drain (called a plug) that screws into the base (called a shoe). There are two common thread types (16 and 11 1/2 Threads Per Inch), and one uncommon one (14 TPI).
What is a tub flange?
The flange is meant to collect moisture, which gravity draws down the wall, and prevent it from ending up in the wall cavity. A properly built enclosure will have a moisture barrier or roofing felt or plastic sheeting drape over this flange before the wall material is installed.
How do you remove a shower drain trap?
Quote from the video:
Quote from Youtube video: So put it my screwdriver into the middle. And I'm just going to undo the screw that attaches the white plastic parts of the waste to the chrome effect cover.
Are bathtub drains a standard size?
Under both the International Residential Code (IRC) and the Uniform Plumbing Code (UPC) the standard size for a tub drain and P-trap is 1 to 1/2 inches and under the IRC the tub waste arm (drain line) maybe 1 to 1/2 inches but under the UPC (Uniform Plumbing Code) a 1 to 1/2 inches drain line is limited to 1dfu (
Are all drain stoppers the same size?
There is no universal drain hole diameter that applies to every bathroom sink, but 1 1/2 inches is the most common size for a bathroom sink drain opening, according to Signature Hardware. Some bathroom sinks have a slightly narrower opening at 1 1/4 inches, while others are a bit wider at 1 5/8 inches.
Are bathtub stoppers universal?
Although they all serve the same purpose—to keep water in the bathtub when desired and allow the tub to be emptied again—there are several different styles of bathtub drain stoppers. The most common types of bathtub drain stoppers are lift-and-turn, push-and-pull, pop-up, toe-touch, flip-it, and trip lever.
How do you remove a push drain stopper?
Quote from the video:
Quote from Youtube video: Stop now generally you want to use a big heavy-duty screwdriver. You want to slide it inside and then you want to try to twist it off.
