How do you replace the bottom drain in a bathtub?
Quote from the video:
Quote from Youtube video: Below all right so let me look down below and see we have for access i think we can change this up. Great.
How do I fix my bathtub drain?
Quote from the video:
Quote from Youtube video: And now by loosening or tightening we affect how far that plunger travels okay so it starts for us by removing your trip lever plate.
How do you replace a bathtub drain flange?
Quote from the video:
Quote from Youtube video: Tightening always start the drain off hand tight to ensure it isn't being cross threaded snug up the drain with a wrench clean up the plumber's putty and then reinstall.
Why is my bathtub leaking from the bottom?
Leaking drains are a likely cause of water that seeps from underneath your bathtub. This could be a leak coming from under the drain, which would require the help of a plumber to set right. However, a leaking tub drain could also be caused by a failing seal in the vicinity of the drain assembly.
Sep 24, 2019
What are the parts of a bathtub drain?
The waste and overflow system of a bathtub consists of a bath drain stopper mechanism and a waste and overflow pipe assembly. There are three main types of bathtub drain stoppers: the pop-up/lift-up, the plunger/lift bucket gate and the trip lever/rocker arm pop-up.
May 20, 2020
How do you take apart a bathtub drain?
Unscrew the knob on the top of the drain stopper to see if there is a set-screw underneath. If your drain stopper has a set-screw, use a small screwdriver or a hex key to unscrew it. Twist the entire stopper counterclockwise until it pulls free from its mounting post. Remove the mounting post using pliers.
What are the different types of bathtub drain stoppers?
The six most common types of bathtub drain stoppers are push-and-pull, pop-up, lift-and-turn, flip-it, toe-touch, and trip lever. It does not matter what type you have unless it must be fixed or replaced. The sole purpose of a bathtub stopper is to keep the water in the tub while you soak.
Oct 26, 2021
What to do if bathtub is leaking through ceiling?
Remove any access hatch or panel you have to expose the tub’s plumbing connections. Run water in the tub and look for any water leaking directly below it. If you see water leaking, it is very likely you have loose connections in the drain fitting or the drain trap below the tub. Tighten or repair them as needed.
May 18, 2022
Where is my bathtub leaking from?
There are two main areas where a bathtub leak might occur: the faucet drip or the underlying pipes. Additional areas to watch are the grout, body of the tub and the drain. Depending on the nature of the leak, you have different repair options. However, signs of trouble remain constant for both types of leaks.
How do you install a bathtub drain kit?
Quote from the video:
Quote from Youtube video: If it doesn't pop up high enough you can adjust it and then they just have a setting nut they keep that in place but this really just slides in there it's kind of nice I really like the cable drains.
What is a tub drain assembly?
A bathtub drain assembly is a series of plumbing parts that transport the waste water from a bathtub, feeding the water into a large drainpipe. The bathtub drain assembly is made up of its own series of pipes that are interconnected, and also connect to the large drainpipe.
Jun 19, 2022
What is a drain flange?
A bathtub drain flange is the finished drain part that’s visible in the tub. Some manufacturers refer to the drain flange as a “drain body” or “drain basket”. Drain flanges come in many different finishes and have a variety of stopper options for filling the tub.
How tight should tub drain flange be?
Allow the threads to pull the flange down into the drain shoe. Step 8: Use the drain-removal tool or plier handles to tighten the flange into the drain. The flange should be tight enough to prevent water leaks, but not tight enough to damage the tub.
Dec 17, 2014
How do you tighten a drain flange?
Quote from the video:
Quote from Youtube video: It's a little hard to get a grip on it so you really want to push down with your hand while reaching from underneath.
What can I use instead of plumbers putty?
Silicone’s chemical makeup sets it apart from plumber’s putty and other materials. While there are different brands and formulas, all silicone caulk contains oxygen, carbon, and hydrogen polymers. The main difference between plumber’s putty and silicone caulking is that silicone hardens once it’s applied.
