We consulted with the experts, and they gave us the answer. Yes, you can add a blower to a fireplace to improve its efficiency through the following mechanisms: Circulation of warm air. Forcing warm air out.

Can you add a blower to an existing fireplace?

Can You Add a Fireplace Blower to an Existing Fireplace? Yes, you can add a fan/blower to most gas and wood fireplaces, inserts, and stoves. You will need to find a fireplace rated fan that will fit your fireplace and follow all instructions for installation in the unit’s manual.

Are fireplace blowers worth the money?





Well, let us reassure you that fireplace blowers do actually work, and they make a great contribution to any living space. They function by drawing in your home’s air, then heating it in a specially-designed tube that is installed near your fireplace.

How do I make my fireplace blower quieter?

Dust bunnies can accumulate on the blades of a fireplace fan and throw it out of balance. That causes vibration, noise and premature bearing wear. Cleaning a fireplace blower every few years keeps it running quieter and longer. Remove the blower and suck out as much dust as possible with a shop vacuum.

How many CFM do I need for a fireplace blower?

250-500 CFM

Estimates are 250-500 CFM (cubic feet per minute) of air in the home MUST be consumed by the fireplace, or smoke will begin to spill into the room.

How do I get more heat from my fireplace?





Fortunately, there are several things homeowners can do to maximize fireplace heating efficiency:

  1. Install a Glass Fireplace Door. Installing a fireplace door is an effective and inexpensive solution to get more heat out of your fireplace. …
  2. Use a Fireback. …
  3. Upgrade Your Fireplace. …
  4. Use the Damper to Turn Up the Heat.


What is the fireplace blower called?

fireplace fans

Fireplace blowers, also called fireplace fans, can bring heat into your home that would normally be lost up the chimney.

Can I add a blower to my gas logs?



Blowers sadly cannot be put on gas logs, but that doesn’t mean there aren’t any viable solutions out there for you to try. Our experts here at The Fireplace Place will tell you that your best bet is to simply add a blower to your fireplace or install a direct vent insert.

How do you replace the blower on a fireplace insert?


Quote from Youtube video: Slide the blower assembly into the fireplace on the right hand side of the lower access position the blower so that the magnets on the back of the blower are against the rear wall of the fireplace.

Why is my wood fireplace blower so loud?

Wood stoves will still function without blowers. A wood stove’s blower can make excessive noise for a number of reasons. Some blowers are louder than others simply because their motors are more powerful.

How do I build a fireplace blower?



Quote from the video:
Quote from Youtube video: These power cable off of these individual fans and hook them together into sort of a chain like. This. As you can see I've kind of got the whole thing kind of held together with zip ties.

Why is my fireplace fan blowing cold air?

The most common cause of a drafty fireplace is a downdraft. A downdraft occurs when cold air blows across your chimney and eventually down your chimney and through your fireplace. Counteract the downdraft by replacing your chimney cap and damper and make sure it is installed properly.

Do wood burner fans work?

How do stove fans work? Stove fans are powered completely by the heat generated from your wood burning or multi-fuel stove. They do not require any electricity to function, so you don’t need to worry about any extra batteries or electric mains to run.

Are wood burner fans worth it?

A wood stove fan is effective that can easily and quickly warm up your home without using any liquid fuel or electricity while performing its task. They are noiseless, which makes you stay worry-free about the noise level. Also, it ensures 20 – 25% faster warmth than a no-stove fan.

Where do you put a fan on a log burner?



A wood stove fan should typically be placed on a flat and smooth area on the top of a wood burning stove and located near the back area of the stove. For wood stoves with the flue sticking out the top, the fan should be placed to the rear of the stove and to the side of the stovepipe.

Are stove fans a gimmick?

Designed to rapidly improve the circulation of heat from the stove, and therefore reduce hot and cold spots throughout the house, stove fans aim to not only improve comfort but also improve the stove’s efficiency and reach.

Are 2 stove fans better than one?

Here are the top 5 reasons 2 vaned blades are better. Two vaned blades use less power to start and operate. This means an Ecofan will be quicker to start up and our blades will create less stress on the motor, resulting in a longer motor life.

Are heat powered stove fans worth it?

Quick answer: Wood stove fans are worth it, but only for smaller rooms. They will help distribute the hot air a little but are more of a toy and nice to look at as a design item. If you seriously have to distribute heat in your home, you should use an electric floor fan.

How many CFM do I need for a wood stove?



If you place the fire on the room side of a flow restriction, like a throat damper, you need strong draft and high flow up the chimney to keep smoke from spilling into the room. An open fireplace consumes between 200 and 600 cubic feet per minute (cfm) of room air—more if it is a big fireplace with a big, big fire.

Can you vent a wood-burning fireplace horizontally?

You see, stove venting varies by the type of fuel being burned in the stove. For instance, wood-burning stoves will always be vented through the roof of your house, but pellet-burning stoves can be vented vertically through the roof, or horizontally through the wall to the outdoors.

What is the most efficient wood-burning fireplace?

Drolet Escape 1500-I is the combination of everything you would like in an insert wood stove. It has a 65,000 BTU/h heat output. This can heat home with up to 1,800 sq ft area but it’s recommended to be used in 500 sq ft to 1,200 sq ft area. With 78% efficiency, it’s the most efficient wood stove.