What trim is used for stairs?
A stair skirt or baseboard is the trim that runs along the bottom of the wall beside the steps. Often, it is made from the same baseboard used throughout the home, but it can also have a different appearance entirely. Baseboard trim can be cut with mitered corners and follow the angles of each tread and riser.
How do you finish trim on stairs?
Quote from the video:
Quote from Youtube video: First things first is we need to find all of our saw settings to do so simply take your t-bevel line it up with whatever miter you're looking to cuts. Take that t bevel.
What finish should I use on wood stairs?
Polyurethane (Surface Type Finish) Polyurethane is the best surface finish for stairs. Surface finishes do have some drawbacks. The main one is that they can cover up the natural charm of wooden stairs.
How do you finish raw wood stairs?
Steps to Refinishing Your Stair Treads:
- Sand. Start by sanding down the treads to bare wood with the 80 grit sandpaper. …
- Clean. Vacuum between passes, then wipe down the treads with a tack cloth. …
- Sand again. …
- Clean again. …
- Treat the wood. …
- Stain the treads. …
- Apply the Finish. …
- Sand, then repeat two more times.
How do you install baseboard trim on stairs?
Quote from the video:
Quote from Youtube video: So I'll pretty much start by just doing that and then what it is is a series of 45-degree cuts and two just to go up and down the stairs. So first thing I'll do is cut out the lip bull noses.
How do I make stair trims?
Quote from the video:
Quote from Youtube video: And I'm going to just plumb up off of a couple of the nose treads. 5 inches I'll make a mark there. And then I'm going to come down here for a second second mark.
Do stairs need baseboards?
You do not need a skirt board on stairs. If you don’t have baseboards in your house, then you don’t need skirting for your stairs. You might want stair skirting if you have baseboards in your house, as skirting will serve to connect, esthetically, baseboards on either ends of the step.
How do I hide the gaps on my stair treads?
If the gaps are not too severe, consider using colored caulk to cover them. This type of repair has one advantage: It’s pliable enough to move with the steps. If the treads and risers continue to move, the caulking will move with it. It can also help to deaden squeaks and creaking noises.
What do you use for stair skirt boards?
Stair skirts are typically made out of MDF or hardwood. While MDF is the more affordable option, it is not as easy to repair as hardwood. Hardwood is a bit more expensive but offers a range of styles and options that complement any decor.
How can I redo my stairs cheap?
Quote from the video:
Quote from Youtube video: So I start off by eliminating the connection between the drywall and stairs by adding a 1-inch piece of trim to the top of the stringer.
What kind of polyurethane should I use on stairs?
Best wipe on poly for stairs – Minwax Wipe-on Polyurethane
This polyurethane finish provides a durable layer of topcoat protection that is thinner than regular poly, making it an excellent choice for touching up small worn or scratched areas.
Do you use polyurethane on stair treads?
Because stairs are high traffic parts of your home, you must ensure your stairs are well protected from stains, water, scuffs, and scratches by applying three coats of polyurethane to the treads, making sure to lightly sand between each coat for good adhesion between each layer.
What is a stair skirt?
A stair skirtboard is a continuous piece of trim or molding for the sides of your stairs to give them a finished look.
How do you stop baseboard trim on stairs?
Quote from the video:
Quote from Youtube video: You know usually on a miter saw you cut baseboard in the upright. Position because most of the time you're working with at least we're working with about 5 to 6 inch bases.
How do you install beadboard on stairs?
How to Install Beadboard Along Stairs
- Measure up from the top stair tread 34 1/2 inches and make a mark on the wall. …
- Tap a nail into the wall at the bottom mark. …
- Stand a piece of breadboard vertically on the bottom step. …
- Stand the beadboard in place on the step.
How do you put wainscoting on stairs?
Quote from the video:
Quote from Youtube video: The first step is to mark where the top of your chair rail is going to sit i've done mine 32 inches off the floor then just simply draw a level line at that. Point.
How do you do wainscoting on stairs?
Quote from the video:
Quote from Youtube video: One of the best ways of dealing with the bottom rail of staircase wainscoting is by building the stairs with a gap between the ends of the rough treads. And risers and the wall.
How do you finish the edge of beadboard?
Quote from the video:
Quote from Youtube video: And cut it at 46 degrees only leaving 3/16 left on it if I can get this to focus sorry about that and with that I can now place that here. And it will cap. Off. This end right here.
Do you put trim over beadboard?
They said, “The correct way to do it is to install the baseboard first, then cut the beadboard to butt it.” Their reason was so that dust, moisture, etc do not get down into the vertical gaps in the beadboard.
How do you put trim on beadboard?
Quote from the video:
Quote from Youtube video: We're going to cap it in the in at the end because where it ends you just don't want to blunt in so we're going to cut a 45 degree angle. On this and then add another piece to the end of it.
