Step 2: Turn off the power switch if your gas fireplace won’t turn off. Beginning at the fireplace, check the switch to make sure the unit is on. The controller may be on the side of the fireplace or behind a panel in its front. If there is no switch, it could be on the wall near your fireplace or elsewhere in the room …
What do you do when your fireplace won’t turn off?
- Usually there is a rocker switch that is located around your burner which, if in the “ON” position, it will override the remote. Turn the switch to “OFF.”
- There may be a wall switch that allows you to turn your burner on. Turn the switch to “OFF.”
- A slide switch on the receiver has been moved to the “ON” position.
- For fireplaces with a control panel, it’s as easy as turning the control knob to off.
- You should close or turn off the emergency gas valve.
- For those with a key valve, just insert the fireplace key into the slot and turn it until the valve closes. This cuts off the gas supply, and the pilot will go out.
How do you manually turn off a fireplace?
All you have to do is open the front of your fireplace, turn the Pilot knob to “off,” and then turn your gas shutoff valve to the “off” position as well.
Why does my fireplace keep turning on?
The most likely cause of this problem is that wiring is burned or shorted out. Two low voltage wires extend from the remote control receiver to the gas valve, and perhaps from a separate toggle switch to the gas valve.
How do you turn off a fireplace?
Quote from the video:
Quote from Youtube video: It turn up to the pilot. Position you press it in a little bit and you can go ahead and turn that to the off position that shuts the gas off to the entire fireplace.
How do you turn off a wood burning fireplace?
Quote from the video:
Quote from Youtube video: And you're trying to put it out is to pour water on it you want to smother the fire. Because what you're going to do if you pour water on it you're going to create a lot of steam.
How do you turn off an electric fireplace?
Turning off the electric fireplace, you should start by turning off the high heat switch followed by the low heat switch. This is followed by turning off the main power switch, which should also turn off the flames.
How do you turn off a fireplace with a key?
Turning It Off
Is it OK to leave pilot light on gas logs?
We recommend that you turn off your gas fireplace pilot light seasonally. Turning off your gas fireplace’s pilot light can save a substantial amount of energy and money. It is important to remember that not all gas fireplaces have “standing” pilot light, or, a pilot light that is “always on”.
Which way do you turn a fireplace key?
Insert the key back into the key hole to increase or decrease the height of the flame as desired. Turning the key counterclockwise increases the flame and turning it clockwise decreases the flame.
Is it OK to leave a fire in the fireplace?
You should never leave a fireplace burning overnight, regardless of the source. Before you go to sleep, be sure to put out the fire and let the materials cool down. Unattended fire is a hazard, and even the slightest gust of wind can reignite it or blow embers to a nearby flammable material.
Why is my gas fireplace hot when off?
When your pilot light remains on, a small amount of heat is generated. The glass doors on your gas fireplace remain warm to the touch. When the weather is hot outside, it makes sense to eliminate any additional heat sources inside the home, especially if you are running air conditioning inside the house.
What is the wall switch for on a gas fireplace?
Gas Fireplace Wall Switch: What, Why & How
Simply put, a fireplace wall switch is a toggle switch that opens or closes the circuit between the thermopile and the gas valve. It operates at millivolts, meaning it is able to operate at very low-voltage electricity(350-1000 millivolts).
How do you turn off a gas fireplace without the key?
Once the gas is on, go to the fireplace and locate the control valve. Look for the knob with the word “pilot” on the rightmost part of the control valve. Once you’ve located the knob, push it in and turn it from off to pilot position for you to light the pilot.
What is the wall switch for on a gas fireplace?
Gas Fireplace Wall Switch: What, Why & How
Simply put, a fireplace wall switch is a toggle switch that opens or closes the circuit between the thermopile and the gas valve. It operates at millivolts, meaning it is able to operate at very low-voltage electricity(350-1000 millivolts).
Do gas fireplaces turn off automatically?
Nearly every new gas fireplace comes equipped with safety features such as a 100% fail-safe shut-off valve. If the pilot flame goes out, the gas flow will automatically turn off. Another safety device is a safety pilot.
Where is the gas shut-off valve for gas fireplace?
Gas fireplace: The shut-off for a gas fireplace is typically on the control panel. This control panel can be found behind the front screen, where a knob that controls the flow of gas can be turned to ‘off’.
How do you tell if a gas valve is on or off?
Quote from the video:
Quote from Youtube video: Way. If the handle of the valve is vertical and the pipe is vertical in other words the handle. Is in line with the pipe then the valve is on.
Does a gas fireplace need a shut off valve?
No, they are not required, but you might like to have them installed for added protection in the event of an earthquake. Q.
